Max RE-BAR TIER RB518 Operating instructions

RB518(CE) RB398(CE) RB218(CE)
RE-BAR TYING TOOL
OPERATING AND MAINTENANCE MANUAL
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING
AND INSTRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
RB218RB398RB518
WARNING

11
3. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
2. TOOL SPECIFICATIONS
PRODUCT NO. RB518 RB398 RB218
WEIGHT 2.4kg (5.3lbs) (Battery in-
cluded)
2.4kg (5.3lbs) (Battery in-
cluded)
2.4kg (5.3lbs) (Battery in-
cluded)
HEIGHT 305mm (12") 305mm (12") 305mm (12")
WIDTH 105mm (4-1/8") 105mm (4-1/8") 105mm (4-1/8")
LENGTH 305mm (12") 290mm (11-3/8") 270mm (10-5/8")
WRAPS PER TIE 3 or 4 Wraps/tie 3 Wraps/tie
BATTERY Li-ion14.4V/(JPL91440A)
ACCESSORIES Battery pack JPL91440A (2pc.)
Battery Charger JC925
Carrying case, Belt hook
Operating temperature -10°C to 40°C (14°F to 104°F)
Humidity 80% RH or less
Window
Release lever
Release stopper
Arm
Curl guide
Trigger
Latch
Battery pack
(JPL91440A)
Grip
LED
Torque and wrap dial (RB518)
Torque dial (RB398)
Feed dial (RB218)
Trigger lock
Reel stopper
Tie-Wire
Reel holder
Terminal
Pack cap
Battery pack (JPL91440A)
Belt hook
Battery pack
entry point LED lamp (Orange)
Charging status indicator lamp
LED lamps (Red and Green)
Charging status indicator lamps
Power cord
CE (VDE) Power plug
Power cord of JC925(CE) is removable from the charger.
Tightening
Torque 150cNm
(13.1lbF·inch)
Production
number
Main
switch

12
<Battery charger>
<Battery pack>
3. WIRE SPECIFICATIONS
BATTERY CHARGER:
Use only an authorized Battery charger, MAX JC925.
Product name LITHIUM ION BATTERY CHARGER
Product code JC925(CE)
Input AC220-240V 50/60Hz 1.4A 160W
Output DC14.4V 7.5A
DC18V 5.4A
DC25.2V 4.5A
Weight 1.5 kg (3.3 lbs)
Operating temperature range 5°C to 40°C (41°F to 104°F)
Operating humidity range 80% RH or less
Product name LITHIUM ION BATTERY PACK
Product code JPL91440A(CE)
Battery type Lithium ion battery
Nominal voltage DC14.4 V (3.6V x 4 cells)
Nominal capacity 3.9 Ah (3,900 mAh)
Charging time
(When charger JC925 is used)
Quick charging - Approximately 40 minutes (Approximately 90%
of capacity)
Full charging - Approximately 60 minutes (100% of capacity)
Accessories Pack cap (For preventing short circuit)
Weight 0.5 kg (1.1 lbs)
Charging temperature 5 °C to 40 °C (41 °F to 104 °F)
Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating humidity range 80% RH or less
MODEL RB518 RB398
TIE WIRE TW898 TW898-PC TW898 TW898-EG TW898-PC
DIAMETER 0.8mm 0.8mm 0.8mm 0.8mm 0.8mm
TIES PER COIL (3 Wraps/tie)
Approx. 90 ties
(4 Wraps/tie)
Approx. 75 ties
(3 Wraps/tie)
Approx. 80 ties
(4 Wraps/tie)
Approx. 65 ties
Approx.
120 ties
Approx.
110 ties
Approx.
105 ties
TIES PER
CHARGE
(3 Wraps/tie)Approx. 2,400 ties
(4 Wraps/tie)Approx. 2,200 ties
Approx. 2,600 ties
MODEL RB218
TIE WIRE TW898 TW898-EG
DIAMETER 0.8mm 0.8mm
TIES PER COIL Approx. 170-210 ties Approx. 155-190 ties
TIES PER CHARGE Approx. 3,000 ties

13
4. TECHNICAL DATA
1NOISE
Measured value according to EN 60745:
A-weighted sound pressure level (LpA): 71dB
Uncertainty (KpA):3dB
A-weighted sound power level (LWA): 82 dB
Uncertainty (KWA):3dB
2VIBRATION
Measured value according to EN 60745:
Vibration total values (ah): 1.9 m/s2
Uncertainty (K):1.5 m/s2
The following information:
- that the declared vibration total value has been measured in accordance with a standard test method and may
be used for comparing one tool with another;
- that the declared vibration total value may also be used in a preliminary assessment of exposure.
- that the vibration emission during actual use of the power tool can differ from the declared total value depending
on the ways in which the tool is used; and
- of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time.)
3RADIATED EMISSION 30-1000 MHZ
Class B
4Overvoltage category
category 1 according to IEC 60664-1
5Pollution degree
degree 4 according to IEC 60664-1
6Design guidelines
Machinery directive Annex 1, EN 60745-1, EN 60745-2-18
5. APPLICATIONS
* Precast plants * Foundations
* Commercial buildings * Road & bridge
6. APPLICABLE BAR SIZES
7. ABOUT PRODUCTION YEAR
This product bears production number in the body. The two digits of the number from left indicates
the production year.
Minimum Maximum
RB518 16mm ×16mm (#5 ×#5) 22mm ×25mm (#7 ×#8)
RB398 10mm ×10mm (#3 ×#3) 16mm ×19mm (#5 ×#6)
RB218 Mesh ×Mesh 10mm ×10mm (#3 ×#3)
Minimum Maximum
RB518
13mm × 13mm × 10mm (#4 × #4 × #3) 16mm × 16mm × 25mm (#5 × #5 × #8)
RB398
10mm × 10mm × 10mm (#3 × #3 × #3) 13mm × 13mm × 13mm (#4 × #4 × #4)
Minimum Maximum
RB518 10mm ×10mm ×10mm ×10mm
(#3 ×#3 ×#3 ×#3)
13mm ×13mm ×16mm ×16mm
(#4 ×#4 ×#5 ×#5)
RB398 10mm ×10mm ×10mm ×10mm
(#3 ×#3 ×#3 ×#3)
13mm ×13mm ×13mm ×13mm
(#4 ×#4 ×#4 ×#4)
WARNING
(Example)
15526035D
Year 2015