Maxcom MM41D User manual

Maxcom MM41D
4G Fixed Wireless Phone
User Manual

Safety and Maintenance
While using the phone, please observe the following
points
• Before use please read the instruction manual carefully.
• Do not power on the phone when use of the phone is
prohibited or it may cause interruption or danger.
• Please keep your phone off when you are on a plane. If
functions that will automatically power on your phone,
such as alarm clock or calendar, are setup, please check
and cancel the configuration before boarding the plane.
•While using the phone, please keep away from heat
sources and high voltage environments, such as electric
appliances or electric cooking devices. Please use the
phone under normal temperature. Using it in
temperatures above 55℃or below -10℃may damage
the phone.
•Pay attention to fire prevention. Make sure to power off
the phone while you are near flammable materials, such
as gas-filling stations and fuel storage.

•Do not hold the phone in your hand while driving. Do
not put the phone above the air bag or within reach of the
airbag so as to prevent damage when the airbag is
inflated.
•Original battery, charger and accessories should be
used.
•Phone may interfere with nearby electronic devices;
therefore keep it away from electronic devices such as
radio, PC, pacemaker and hearing aid, etc. Do not place
the phone near credit cards or magnetic fields. Please
power off your phone in hospital and other special places
according to specific regulations there.
•Keep the phone away from mechanic vibration or
shaking. Do not hit the screen of your phone with sharp
tools.
•If plastic cover or case is used for the phone, surface
coating may be damaged.
•Do not disassemble the phone without professional
help.

•Do not use benzene, thinner or alcohol to clean the
cover of your phone. Keep your phone away from
corrosive chemicals such as detergent. Use a clean and
soft cloth instead and wipe gently.
•Prevent your phone from insulation or places with
excessive smoke or dust.
•Your phone is not water-proof, so please keep it dry. Do
not use it in a damp environment, such as a bathroom.
Keep it away from rain and moisture.
•When you are to pull the charger away from your phone
or cut off the power supply of the charger, please hold
the connector tightly and then pull out. Do not drag the
power cable.
•Do not rely on your phone as the only communication
device for emergency, such as medical rescue.
• Keep the phone out of reach of children so as to avoid
danger.

While using battery, please observe following points
• Before use, please read instructions for use, as well as
the label on the surface of battery.
• Please charge the battery in a cool and well-ventilated
room. Otherwise, high environment temperature may
lead to overheating, smoking, burning, distortion or even
explosion of the battery.
• There are special protection circuits and devices inside
the battery, so do not open the battery; otherwise it may
lead to short circuit or electrolyte leak. If electrolytes
enter the eyes, there is danger of blindness. In such
case, immediately wash eyes with clean water (Do not to
rub the eyes with hands) and then immediately go to
hospital for treatment.
• Do not squeeze the battery. Keep it away from
mechanical vibration and shaking. Do not short connect
the battery, for this may damage the battery and
components connected to it. A short circuit may be
caused by coin or clip directly connecting the anode and

cathode of the battery, so do not put the battery together
with metal objects.
• Please keep the metal contact points and battery clean.
• Do not use a damaged or depleted battery.
• The battery should be replaced when it cannot meet the
requirements for performance. Battery can be charged
hundreds of times before it should be replaced. Battery
belongs to consumables. Though it can be charged
hundreds of times, its quantity of electric charge may
decrease gradually. When service time (talk time and
standby time) is found to have decreased, the battery
shall be replaced.
• Prevent battery’s exposure to the sun or places with
excessive smoke or dust. Do not use it in damp
environments, such as a bathroom. The battery is not
waterproof; so keep it away from rain and moisture.
• Do not put the battery in places that are too hot or too
cold. Temperatures above 55℃or below -10℃may affect
performance of the battery.

• Do not put the battery in fire so as to avoid explosion.
• Do not put the battery in water so as to avoid short
circuit inside, resulting in battery overheat, smoking,
distortion, damage or even explosion.
• Treat battery according to local regulations (for
example, recycling). Do not treat battery as domestic
garbage so as to avoid explosion and pollution.
• Special charger should be used to charge this battery,
and charging time should not exceed 12 hours.
•Keep battery out of reach of children to avoid danger.
•Do not place the battery in fire; follow local laws and
ordinances in disposing used battery.
Using other types of battery, charger and accessories
may violate the certification or warranty terms of
equipment and may result in danger.
While using battery charger, please following points:
• Before use, please read instructions first, as well as
labels on the surface of the charger.

• Do not disassemble or modify the charger or use it
when power cable is damaged; otherwise there will be
electric shock or fire, or the charger may be damaged.
• Do not touch the charger with wet hands. If the charger
contacts water or other liquids, immediately cut off the
power supply.
• Do not short connect the charger and keep it away from
mechanical vibration or shaking and direct sunshine. Do
not use it in damp environments, such as a bathroom.
The battery charger is not waterproof; so keep it away
from rain and moisture.
• Do not use the charger near electric appliances such as
a TV set or radio.
• When pulling out the plug, hold the charger instead of
dragging the power cable so as to avoid damage to the
power cable.
•Keep the charger out of reach from children so as to
avoid danger.

1. Your Phone
1.1 Appearance

1.2 Key description
LCD
1
M1~M5
Press to dial the Preset number if set
OK.Family number.
2
MP3
Shortcut to access the Music menu in
idle screen.

3
FM
Shortcut to access the FM menu in
idle screen.
4
SMS
Shortcut to access the sms menu in
idle screen.
5
Redial
In standby mode, press to enter
Call log menu. And can redial the last
number.
6
MUTE
When the call is connected, select it
to switch to MUTE mode.
7
Speaker Key
Activate hands-free
operation(speaker icon).
8
0 key
Space key
9
DEL/BACK
KEY
In any menu you can go back to the
last menu.
Press to delete the characters you’ve
entered.
In standby status, press to enter the
Contacts menu.
10
MENU/OK
KEY
Press to go into the main menu in idle
screen
Press it to access the submenu.

11
UP KEY
You can scroll the cursor with the UP
key;
Shortcut to calendar menu in idle
screen.
DOWN KEY
You can scroll the cursor with the
DOWN key;
Shortcut to access the settings menu
in idle screen.
LEFT KEY
Turn down the volume during
conversation,
Shortcut to access the FM menu in
idle screen.
RIGHT KEY
Turn up the volume during
conversation or playing music and
FM
Shortcut to access the calculators
menu in idle screen.
12
Dial key
To make a phone call, input the
phone number and press Dial key.
Shortcut to access the outgoing menu
in idle screen.

13
Power on or
off/ END
Key
Press and hold about of 3 seconds to
power the phone on/off;
Press the end key to end the phone
call or go back to the idle screen.
14
0~9 Numeric
Keys
To input numbers and characters;
In idle screen, press * to enter *;
In editing screen, press * to enter the
special symbol mode.
In idle screen, press # to enter #;
In editing screen, press # to switch
the input method.
1.3 State icons
<Icons on the screen: >
Network signal
You can use the 4G network
services.
New SMS received.
Missed call.

1.4 Screen background light
Background light can illuminate the screen. When you
power on your phone, the background light will turn on for
a certain period. If no key is pressed within the period,
the background light will turn off automatically so as to
save battery.
To setup background light brightness:
[Menu][Settings][Display][Brightness]
Calling
Activated silent mode.
Hotspot signal
Hotspot signal
The signal of WLAN
E
Network Identification( registered)
Bluetooth
Battery life.

1.5 Adjust the volume
During a call
Press [Right Key] to increase the volume.
Press [Left Key] to decrease the volume.
During MP3 playing
Press [up Key] to increase the volume.
Press [down Key] to decrease the volume.
During FM playing
Press [Right Key] to increase the Increase frequency
band.
Press [Left Key] to decrease the Increase frequency
band.
2. Instructions before Use
2.1 Connectors on the Phone

1.Headset
2.RJ45
3.USB mini head
4. Antenna Connector
5.Battery Jack
6.SIM card Slot
7.SD card slot
8.RJ9 handset cord Jack

2.2 Assemble the antenna
2.3.Charging the battery by adapter
When the battery is fixed to the phone , put Mini USB
cable to AC-Adapter Jack.
During charging, screen shows the battery charging icon,
when the battery is full, the charging icon will stop rolling.
2.4.Install SIM card

Always switch the phone off before removing or inserting
SIM card.
Open the bottom cover of the battery. Remove the
battery; slide the SIM card into the SIM card slot. Make
sure that the contact area of the card is facing down, and
the beveled corner matches with the SIM card slot. Put in
the battery and install the bottom cover.
3. Operation
3.1 Power on
The device can work on both single battery mode and
single charger mode.
1. Press and hold [Power key] button until boot screen
appears.
2. If there is a prompt for PIN code, please input your PIN
code and then press [OK] key.
After power on, if SIM card inserted is valid, your phone
will automatically search for an available network; if not, it
will prompt: Insert SIM or Invalid SIM.
3.1.1 PIN code

PIN code is used to prevent illegal use of user’s SIM
card. If your phone has enabled PIN code protection,
there will be prompt for entering the PIN code. If wrong
the PIN code is entered for three times, the SIM card will
be automatically locked. You have to enter PUK code in
order to unlock it. PIN code is related to SIM card instead
of the phone and is provided by your network service
operator.
3.1.2 PUK code
PUK code, referring to personal unlock code, is used to
unlock a SIM card that is locked because of the wrong
input of PIN code. If the wrong input of PUK code
exceeds ten attempts, the SIM card will lose efficacy.
PUK code is provided by network service operator.
Please contact with the operator for the default PIN and
PUK.
3.2 Power off
To power off, please hold [Power key] until power off
screen appears.

4. Basic Function
4.1 Dial Phone
4.1.1 In standby state, press the number keys to enter
the phone number and then press [Send key] to call.
4.1.2 Press [DEL/BACK key] to clear the last digit or hold
it to clear all.If the phone number being dialed can be
recognized by the phone book, the name of the contact
person will be displayed on the dialing screen.
4.1.3 Press [Power key] to end a call.
4.2 Quick dial from contacts list
4.2.1 In standby state, press [DEL/BACK key] to enter
the phonebook.
4.2.2 Slide the scroll bar to choose a contact you want to
dial .
4.2.3 Press [Send key] to dial out.
4.3 Quick dial from Outcall number list
4.3.1 In standby state, press [Send key] to enter [Outcall
number] list.