Maxtor 777 W V1.0 User manual

DigitalMultiplexRecorder
USER SMANUAL
777 WV1.0
Pleasereadthe instructionsthoroughly beforeoperation and retainit forfuturereference.

The lightning flashwitharrowheadsymbol, within anequilateraltriangle,isintended toalert
the usertothe presenceofuninsulated"dangerousvoltage"withinthe product'senclosurethat
maybeofsufficientmagnitude toconstituteariskofelectricshocktopersons.
The exclamation point within anequilateraltriangle isintendedtoalert the usertothepresence
of important operating and maintenance-(servicing)instructionsinthe literatureaccompanying
the appliance.
All thesafetyand operating instructionsshouldbereadbeforeoperation.Theimproperoperation may cause
permanent damage.
Pleaseusethe providedadaptor(Otheradaptorisnot suitable forthismachine).
Pleaselift andplacethisequipment gently.
Donot exposethisequipmenttoopen sunlight.
Donot usethisequipmentnearwaterorin contact withwater.
Donotspillliquid ofanykind on the equipment.
Pleasepowerdownthe unit beforeunplugging.
DonotswitchthePowerOn&Off within shortperiod of time (within3seconds).
Donot attempt tohavethisequipmentserviced byyourself.
Installation should be made byqualified servicepersonnel.
WARNING

WhatDoYouGet
WhatDoYouGet ? ?
FEATURES--------------------------------------------------------------------------------------
PACKAGEINCLUDING----------------------------------------------------------------------
BeforeOperation
BeforeOperation
INSTALLATIONGUIDE----------------------------------------------------------------------
FRONTPANEL----------------------------------------------------------------------------------
BACK PANEL-----------------------------------------------------------------------------------
BasicOperation
BasicOperation
STARTTHISUNIT------------------------------------------------------------------------------
OPERATION--------------------------------------------------------------------------------------
DetailedMenuSetup
DetailedMenuSetup
MENU ----------------------------------------------------------------------------------------------
ACCESS MENU ---------------------------------------------------------------------------------
MAINMENU--------------------------------------------------------------------------------------
MENUOPTIONS--------------------------------------------------------------------------------
MOTIONDETECTION-------------------------------------------------------------------------
Network SettingGuide
Network SettingGuide
HARDWARECONNECTIONATDMRSIDE--------------------------------------------
STATICIPSETTING--------------------------------------------------------------------------
DYNAMICIPSETTING ------------------------------------------------------------------------
SOFTWAREOPERATIONATCLIENTSIDE---------------------------------------------
INTRODUCTIONOFBASICOPERATION------------------------------------------------
PLAYBACK OPERATION----------------------------------------------------------------------
ADVANCEDSETTING--------------------------------------------------------------------------
CONNECTVIDEO WEBSERVERVIAIEBROWSER----------------------------------
TABLEOF CONTENTS
1
1
2
3
5
6
6
8
9
9
10
15
17
18
224
34
35
37
38
41

TABLEOF CONTENTS
AdvancedOperation
AdvancedOperation
OPERATIONOPTIONS-----------------------------------------------------------------------
KEYLOCK ----------------------------------------------------------------------------------------
TROUBLESHOOTING--------------------------------------------------------------------------
SPECIFICATIONS-------------------------------------------------------------------------------
Appendix
Appendix
APPENDIX#1 –INSTALL HDD---------------------------------------------------------------
APPENDIX#2 –RACKMOUNT---------------------------------------------------------------
APPENDIX#3 –RECORDING SPEED------------------------------------------------------
APPENDIX#4 –PINCONFIGURATIONS--------------------------------------------------
43
44
44
45
46
48
49
50

FEATURES
DMRFeatures
Remotecontrol via the Internet
Wavelet Compression Format replacesTime-LapseVCR + Multiplexer
4Audio inputs/ 2Audiooutputs
OnScreen Displayand RTC(Realtimeclock)Function
Support from4channelsto7/9/10/13/16 channelsvideo inputs
Picture-In-Picture(PIP)isavailable in liveand DMRplaybackmodes
Motion detectionfunction and4level video qualityadjustable on eachchannel
AlarmInput &Output Function
Videolossdetectedon eachchannelcan recordup to160 events
Power-lossmemoryfunction
Support2Removable HDDs,IDEType
QuickMultiple Searchbydate/time,alarm,fulllist
Securitypasswordprotection
1
What Do YouGet?
What Do YouGet?
DigitalMultiplexRecorder(withHDD cartridge) User’sManual
2KeysforCartridge PowerAdapterand Cord
NOTE:Please check thepackageto make surethatyou receive thecompleteaccessories whichincludes the
componentsshownabove.
Accessoriespack
PACKAGE INCLUDING
CD-ROM

2
1. Connectcameras and monitorwith theDMR.
2. ShownbelowisoneexampleforconnectingtheDMRto yourexisting ObservationSystem.
3. Install HDDs(ThecompatibleHDD Brandsarelistedinthefollowing table.)
Pleaserefertopage.46Appendix#1forinstallation instructions.
The HDDsmustbe installed beforethe DMRisturnedon.
INSTALLATION GUIDE BeforeOperation
Manufacturer Model Capacity Rotation
HITACHI Deskstar180 GXP(120 GB) 120GB 7200 rpm
HITACHI Deskstar7K250, HDS722516VLAT20 160GB 7200rpm
HITACHI Deskstar7K250, HDS722525VLAT80 250GB 7200rpm
IBM Deskstar120GXP(80GB) 80GB 7200 rpm
IBM Deskstar120GXP(120GB) 120GB 7200 rpm
Maxtor DiamondMax536DX(60GB)4W060H4 60GB 5400rpm
Maxtor DiamondMaxPlus9 80GB 7200 rpm
Maxtor DiamondMaxPlus9, Model#6Y120L 120GB 7200 rpm
Maxtor DiamondMaxPlus9, Model#6Y160L0 160GB 7200rpm
Seagate Barracuda ATAIV, ST380021A 80GB 7200rpm
Seagate Barracuda ATAV, ST3120023A 120GB 7200 rpm
Seagate Barracuda 7200.7Plus, ST3160023A 160GB 7200 rpm
WesternDigital CaviarWD1200BB-00CAA1 120GB 7200rpm
WesternDigital CaviarWD2000BB-00DWA0 200GB 7200rpm
COMPATIBLEHARD DISKBRANDS
Alarm
Sensor MainMonitor
Power
Camera1 Camera16 Call Monitor
Audio Speaker

3
FRONT PANEL
REC
SELECT
MENU
ENTER
ZOOM SLOW
ALARM
HDD
Full
HDD
TIMER
PLAY
REC
Down
Left
Right
POWER
16
7
2 4 6
1 53
8 10 12 14
9 11 13 15
Up
1.REMOVABLEHDDCARTRIDGE
Pleaserefertopage.46 Appendix#1.
2. MENU
PressMENU button toentermain menu.
3. ENTER
PressENTERbutton forconfirmation.
4. ZOOM
PressZOOMbutton toenlarge the picturedisplay.
5. PressPIPbutton forPictureinPicturescreen.
6. SLOW
Toslowdownspeed of playmode.
7. SELECT
PressSELECTbutton toselectappointed camera(1~16)todisplayon fullscreen mode.
8. 4channelsdisplaymode

4
9. 7, 9,10, 13 channelsdisplaymode
10.16 channelsdisplaymode
11. LEDLIGHT
The LEDLight isONunderthe followingconditions.
HDD : HDD isactivated
HDD Full: HDD isfull
ALARM: If youwant toturnoff the ALARMLEDlight, pleaserefertopage.13 andset the
Camera/ ALARMitemasOFF. (allof thecamerasshould beset asOFF.)
TIMER: When TimerissetasEnabled
PLAY : OnPlaymode
REC: OnRecording mode
12. CAMERA(1-16)
PresstheCameraSelect(1-16)toselectspecified camera.
13. REC
Press REC tostart recording.
14. REW/ LEFT
REW:UnderDMRplaymode, itcanplayvideo backwardat differentspeeds. (Press REWagain toadjust
speedas1, 2, 4, 8, 16, 32 times)
Left : Undersetupmode,it worksasLeftbutton.
15. PLAY
PressPLAYtoplayrecordedvideo.
16. STOP/ DOWN
STOP: UnderDMRRecord/ Playmode,itcan stop the action.
DOWN: Undersetupmode,it worksasDownbutton.
17. PAUSE/ UP
Pause: UnderDMRplaymode, it canpausethe action.
UP: Undersetup mode, it worksasUpbutton.
18. FF /Right
FF : It can playvideoforwardat high speed, and pressFFagaintoadjust speed from 1, 2, 4,8, 16,32 times.
Right : Undersetup mode,itcan workasRight button.
19. POWER
PressPowertoturnON/ OFF the DMR.

5
1. POWER
Pleaseusethe providedadaptortoconnect powercord(Otheradaptorsarenotsuitable forthismachine).
2. EXTERNAL I/O
Controlled remotelybyan externaldeviceorcontrolsystem.
Alarminput, externalI / Oexplanation.
3. 75 /HI
When using Loop function,pleaseswitchto HI. If youdon’t useLoop functionordisconnect the video
input, pleasesetit as 75 .
4. VIDEOINPUT (1-16)
Connect tovideo source,suchascamera.
5. LOOP(1-16)
Connect videosignal between Input port and Loop port tomakealoop.
6. AUDIOIN(1-4)
Connect toaudiosource,suchasmicrophone.
IPS shouldbe setto25A(forNTSC)or18A(forPAL)
4audioinputs,butuserscanonlyselect1forrecording.
7. AUDIOOUT (R/L)
Connect tomonitororspeaker.
IPS shouldbe setto25A(forNTSC)or18A(forPAL)
with2mono audiooutputsfromthesamesource.
8. MONITOR
Connect toMain monitor.
9. CALL
Connect toCALLmonitor. Showthe SwitchDisplay.When the alarmistriggered, the callmonitorwillshow
the triggered channel foraperiodof time.
10.LAN
Connect Internet by LANcable.
BACKPANEL
8 6 7
5
4
1 2 310 9

Connect the ACPowerCordwithPowerAdapterand plug intoan electrical outlet. TheRed LEDindicatorlightwillbe
ONand the DMRisin Standbymode.
1.
PressthePowerbutton. The POWERLEDwillturnfromredtoorange, and otherred LEDindicatorswillturnON. It
takesapproximately5to15secondstoboot the system withthemessage : “HDD Detecting ”. Onconnecting, the
POWERLEDwill change togreen color, and the AlarmLEDwill beON.
2.
6
Beforeusing theDMR, pleasehavethe HDDsinstalled ready. (refertoAppendix#1forinstallation orremovalofHDDs).
STARTTHISUNIT BasicOperation
OPERATION
3. Beforeoperating theDMR, pleaseset upthe system time first. (forsetting systemtime, pleaserefertopage.12).
NOTE:When HDD not found”messageshowsup,pleaserefertoappendix#1.Itmayresultfromthe
improperinstallation of theHDD.
2002 JAN 0101:02:03
M●032GB080GB
RECORDING
The DMRoffersavarietyofrecording modes,suchascontinuousrecording,scheduled time,orbyevents.You can setup
recording speed andresolution.You can settheseoptionsbyselectingMENU /RECORD beforerecording,pleasereferto
page.13.Undertherecording status,ifpowerisoff accidentally,recorded video will stillbe storedin the HDDs.DMRwill
returntooriginalrecordingsituation afterpowerisonagain.
Onthe screen, you willfindthe date, time, HDD recordingtype,theamountof available GBleft in the HDDsmemoryand
the letter “M”representsthe method of recording thatisoccurring.
(OW: HDD Overwrite)
NOTE:1. WhentheHDDsarefull underO/WRecordingmode, previousrecorded
files may beoverwrittenwithout furtherwarning notices.
2.XXGBon theleft sidemeanstheleftspaceintheMasterHDD andthatattheright sidemeans
theleft space intheSlave HDD.
3. IftheHDD’scapacityisonly5GBleft, itwill buzzfor3seconds;soasin4GB, 3GB, 2GBand
1GB. IftheO/WRecording mode(NOTE1)ison, itwon’thave thewarningbuzzer.
Thereare4recording modesin whichRecording can occur: Alarm, Timer,Manualand Motion Trigger.
1. ALARMRECORDING
DMRistriggered byanalarminput. Indicated bythe letter “A”and willshowdiagramon the triggered channel.
2. TIMERRECORDING
Recordingisscheduled byaTimer. Indicated bythe letter “T”.
3. MANUALRECORDING
Recordingisinitiatedbymanuallypressing theRECbutton.Indicated bythe letter “M”.
4. MOTIONTRIGGERRECORDING
Recordingistriggered bymotion detection.Indicated bythe letter “D”. And showdiagramon thetriggered channel.

PLAY
Press “PLAY ”button, theDMRwillshowthe last recording.
1. FAST FORWARD(F.F. )&FASTREWIND(F.R.)
You can increasespeedforFastForwardand Rewindon theDMR.
InthePlaymode, press ”►► ”oncetoget2Xspeed forwardandpresstwicetoget4Xspeed,…andthe maximum
speed can reach32X.
Press ”◄◄ ”oncetoget 1Xspeed rewind andpresstwicetoget2Xspeed, …and themaximumspeed canreach
32X.
2. SLOWFORWARD(S.F.)&SLOWREWIND(S.R.)
You can alsoslowdownthe speedsof Forwardand Rewind ontheDMR.
Inthe Playmode, pressthe SLOWbutton and youwill enterSlowmode.
Press ”►► ”oncetoget 1/2Xspeed forwardandpresstwicetoget 1/4Xspeed,…and theslowest speed can reach
1/32X.
Press ”◄◄ ”oncetoget 1/2Xspeed rewind and presstwicetoget 1/4Xspeed, …andthe slowestspeed can reach
1/32X.
3. PAUSE
It will letyou pausethe currentimage displayedon thescreen.
4. STOP
Press “STOP ”button underallcircumstance,it will returnDMRtolivemonitoring mode.
5. IMAGEJOG DIAL
It will allowyou tomanuallyviewvideo frame-by-frame, oneimageat atime.
While in PLAY mode, press “PAUSE ”,it will pausethe screen.
Press “►► ”button toadvancethe frozenscreenone image forward.
Press “◄◄ ”button tomovebackoneimage.
CAMERASELECT(1--16)
Press CameraSelect(1-16) toselect appointed cameratodisplayonfullscreenmode.
7

Detailed MenuSetup
MENU
8
LASTRECORD
FULL LIST
ALARMLIST
MOTIONLIST
TIME SEARCH
SEARCH
DAY
START
END
QUALITY
IPS
TIMERENABLE
TIMER
HDD OVERWRITE
RECORDIPS
RECORD QUALITY
ALARMRECIPS
ALARMRECQUALITY
MOTIONTRIGGERRECORD
RECORD
TITLE
DWELL
Brightness /Contrast /Color
ALARM
RECORD
CAMERA
AUDIOINPUT
INTAUDIBLE ALARM
EXTAUDIBLEALARM
MOTION AUDIBLEALARM
ALARMDURATION
DWELLTIME
MESSAGELATCH
TITLE DISPLAY
TIMEDISPLAY
TIME
NEW PASSWORD
CLEARHDD
SYSTEMRESET
SYSTEM EVENT
SEVER IP
GATEWAY
NET MASK
DNS
WEBPORT
RESETDEFAULT
NETWORK
MENU

The Menu allowsyou toconfigureyourDMRsettings. Pleasefollowthe
stepsbelowtoaccess the Menu :
Pressthe Menu button. The passwordscreen willappear: Password: 0000
ThedefaultPasswordis0000.Press theEnterbutton toaccess theMenu.
Tokey-in thePassword, pressthe “Right”and “Left”buttonstomovebetween numbers,and usethe “Up”
and “Down”buttonstoinput the number.
Pressthe ENTER button oncethecorrect Passwordisentered. The MENU optionsscreen will appear.
Note:Ifyou getamessage PasswordError”,you might enteranincorrectpassword.
Thereare7optionsavailable in the MainMenu:
SEARCH --------Find recordedlist
TIMER ----------SchedulingRecord
RECORD -------RecordModeSetup
CAMERA -------CameraChannelSetup
SYSTEM--------SystemSetup
EVENT ----------EventList
NETWORK------NetworkSetup
9
Outlined belowarethe buttonsused forMenu setting :
Up”and Down”:Scrollup anddownorchange valueswhen an optionisselected and isblinking
Left”and Right”:Scrollsidewayswithin amenu option that hasbeen selected
ENTER: Selectsasubmenu /an optionunderasubmenu forbrowsing/ modification
MENU : Completesmodification of amenu option andexitsamenu
ACCESS MENU
MAINMENU
NOTE:
(MENU)
►SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
NETWORK

MENU OPTIONS
SYSTEM
10
1. AUDIOINPUT
Tochooseone of 4channelstorecord.(canonlyselect 1duringoperation forrecording)
2. INTAUDIBLEALARM
Toset theINTERNALAUDIBLEALARM. It willbe triggedbyeventoccurrencewhen
the setting isON.
5. ALARMDURATION
Set thereaction timewhichwasdeterminedbythe lengthof
alarmmode responded toabuzzer. Defaultsetting is10 sec.
Optionsare10 SEC, 15 SEC, 20 SEC,30 SEC, 1MIN, 2MIN,
3MIN, 5MIN, 10 MIN, 15 MIN, 30MIN, ALWAYS.
6. DWELL TIME
DWELL TIMEisthetime period thateachchannelsequentially
shownon callmonitor.
7. MESSAGELATCH
Toselect whetherthe DMRmessageswill disappearafter10
secorremainon screen. NOisthe defaultsettingwhichthe
messageswillgo awayafter10 sec.
NOTE:Videoloss, Alarm and Motion messages will beshown
thesame as Alarm Duration time.
8. TITLEDISPLAY
Toset thetitle shownonmonitorornot.
9. TIMEDISPLAY
Toset thetime format on the DMR.
10. TIME
Toset thecorrect time on the DMR.
3. EXTAUDIBLEALARM
Toset theEXTERNALAUDIBLEALARM. It will betrigged byevent occurrencewhen
the setting isON.
(MENU)
SEARCH
TIMER
RECORD
CAMERA
►SYSTEM
EVENT
NETWORK
4. MOTIONAUDIBLEALARM
Toset theMOTIONAUDIBLEALARM. It willbe trigged by
motiondetection occurrencewhenthe setting isON. (SYSTEM)
AUDIOINPUT:1
INTAUDIBLEALARM:ON
EXTAUDIBLE ALARM:ON
MOTIONAUDIBLE ALARM:ON
ALARMDURATION:10SEC
DWELLTIME :02 SEC
MESSAGE LATCH :NO
TITLE DISPLAY:ON
TIMEDISPLAY:Y/M/D
2003-JAN-02(THU)17:37:09
NEWPASSWORD:XXXX
CLEARHDD:NO
SYSTEMRESET:NO

11. NEWPASSWORD:XXXX (Defaultpassword:0000)
Toset thenewpassword.
12. CLEARHDD
DeleteallthecontentsofyourHDD. When you choose “YES”on thisoption,you willbe prompted withthe
question shown: Press “”toclearHDD orpress ”◄”not toclearHDD.
13. SYSTEMRESET
Reset the systemtobooktothe factorydefault settings.
11
ALL DATAINHDD
WILL BE CLEARED
AREYOUSURE?
(◄: NO : YES)
SEARCH
Press ”ENTER”toconfirmSEARCH setup, andthe screen willshowthe following
options.
1. LAST RECORD
Playthe lastrecorded video.
2. FULL LIST
Showalisting ofallrecorded videosorted bytime on the HDD.
D: Motion Recording
M: Manual Recording time
A: AlarmRecordingtime
T: TimerRecordingtime
M-HDD : StorageinMasterHDD
S-HDD : Storage in SlaveHDD
3. ALARMLIST
Showalisting ofallrecorded videotriggeredbyan Alarm.
NOTE:IfthereisnoAlarm recorded, thescreenwill
display EMPTY”.
4. MOTIONLIST
Showalisting ofalltriggered motion detections.
5. TIMESEARCH
Findvideorecordedon aspecificdatethatisentered. (SEARCH)
►LASTRECORD
FULL LIST
ALARMLIST
MOTIONLIST
TIMESEARCH
(MENU)
►SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
NETWORK
►2002-JAN-0102:32:03 M-HDD
2002-JAN-03 01:02:03 M-HDD
2002-JAN-05 21:12:24 M-HDD
2002-JAN-12 12:57:38 M-HDD
2002-JAN-13 16:16:39 S-HDD
2002-JAN-15 23:55:23 S-HDD
2002-JAN-22 18:22:13 M-HDD
2002-JAN-25 12:52:03 S-HDD
◄: PAGEUP: PAGEDOWN
M
M
A
T
D
M
T
D

12
TIMER
1. DAY
Selectthe day, ordaysof the week(Mon–Fri/ Sat-Sun / Daily)thatyou wishtoschedule
the DMRtoautorecording.
NOTE: 1.SpecialDatecouldbe changed by “Enter”, “Up”and “Down”buttons.
2. Ifyou haveselected thespecificdateandrecordingtimerset fromthat specificdaytoanewday,
thentheRecordingTimerSchedulewill be setasawholeweek. ForspecificdateofRecordingTimer
Schedule, it isnot recommended toset EndTimeover23:59. ForExample:IfyousetTimerSchedule
DayasSunday,andSTARTfrom11:30,butEndon 00:20,thenRecordingTimerScheduleissetas
fromeverySunday's11:30 tonextSunday's00:20. Ifyou onlywanttosetRecordingTimerSchedule
fromeverySunday11:30toMonday00:20, thenyou shouldset RecordingTimerScheduleasSunday
from11:30 to23:59,andMondayfrom00:00 to00:20.
2. START
Selectthe starting time forthe recording.
3. END
Selectthe finishing time forthe recording.
4. QUALITY
Selectthe image qualityfortherecording.TherearefourQualitysettings:
BEST, HIGH, NORMALand BASIC.
5. IPS
Stand forImagesPerSecondand itcould let you see Recordsubmenu
formoredetails.
NTSC 25A、15、08、04、02、01
PAL 18A、12、06、03、02、01
NOTE: A”means Recordwith Audio”.
6. TIMERENABLE
Enables/ disablesTimerrecording function.
(TIMER)
DAYSTARTENDQUALITYIPS
DAILY00:00 00:00 BEST25A
DAILY00:00 00:00 BEST25A
DAILY00:00 00:00 BEST25A
DAILY00:00 00:00 BEST25A
DAILY00:00 00:00 BEST25A
DAILY00:00 00:00 BEST25A
DAILY00:00 00:00 BEST25A
TIMERENABLE: NO
(MENU)
SEARCH
►TIMER
RECORD
CAMERA
SYSTEM
EVENT
NETWORK

13
RECORD
1. HDD OVERWRITE
Select “YES”tooverwritepreviousrecording video in HDD.
NOTE:WhentheHDD isfull underO/WRecording mode,previousrecordedfiles
may beoverwrittenwithout furtherwarning notices.
2. RECORDING IPS
Selectthe imagespersecondof recording.The optionsare
asfollowing :
NTSC 25A、15、8、4、2、1
PAL 18A、12、6、3、2、1
NOTE: A”means Recordwith Audio ”.
3. RECORDING QUALITY
Therearefourqualitysettings: BEST, HIGH, NORMALand BASIC.
4. ALARM REC IPS
Selectthe imagespersecondof recordingduring anAlarm.The optionsareasfollowing :
NTSC 25A、15、8、4、2、1
PAL 18A、12、6、3、2、1
NOTE: A”means Recordwith Audio”.
5. ALARM REC QUALITY
Therearefourqualitysettingsduringan Alarm: BEST, HIGH, NORMALandBASIC.
6. MOTIONTRIGGERRECORDING
When youset up theMOTIONDETECTIONfunction (PleaserefertoPage.15forMOTIONDETECTIONSETUP),
1. Select “ON”toset upthe motion triggerrecording:It can automaticallyswitchfromstand-bymodetoRecording Mode.
Themotiondetection willchange the scanning sequenceand shows and “D”onthe monitor.
NOTE: The triggerrecordingtimewilldepend on ALARMDURATIONmode setting (Pleaserefertopage.10 forALARMDURATION)and itwill
recordfromthe lasttriggertime.Forexample, when the alarmduration setting is1min, the timerecordingtimeisfrom9:00:00 to9:01:00.
Ifthe motion detection trigged againat 9:00:40,the trigged recording timewillfrom9:00:00 to9:00:40 and 9:00:40 to9:01:40. The total
recording timeis00:01:40.
2. Select ”OFF”: The screenshows, themotiondetection will change the scanningsequencewhileinrecordingmodeandshows
“M”on themonitor.
3. (Brightness)/ (Contrast) / (Color)
Haveavideoadjustment (Brightness/ Contrast / Color) of eachchannel.The level isfrom0to9.
4. ALARM
SelectLOW/ OFF /HIGHforalarmpolarity. The defaultvalue isLOW.
5. RECORD
Set upwhichchannel you want torecordduring alarmtrigger. The DMRrecordmethodsareasbelow:
EVENT : when alarminputistriggered,DMRwill recordalarming channel morefrequently.
Forexample : when CH01 istriggered, the recording method will become1-2-1-3-1-4….
NORMAL : when alarminputistriggered, DMRwillrecordnormallyasset up.
OFF : when alarminput istriggered, DMRwillnotrecord.
(RECORD)
HDD OVERWRITE: NO
RECORD IPS: 25A
RECORD QUALITY : NORMAL
ALARMRECIPS: 25A
ALARMREC QUALITY : HIGH
MOTION TRIGGER RECORD: ON
CAMERA
1. TITLE
Assign asix-characterstitle toeachcamerainput.Initiallyeachtitleisthe
camera’smaxnumber.
2. DWELL
Select “ON”toset up the channelautoswitching on the callmonitor.
(MENU)
SEARCH
TIMER
►RECORD
CAMERA
SYSTEM
EVENT
NETWORK
(MENU)
SEARCH
TIMER
RECORD
►CAMERA
SYSTEM
EVENT
NETWORK

NETWORK
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
►NETWORK
Pressthe “▲”“▼””◄”“ ”buttonstomovethe cursor.
Pressthe +” -”buttonstochangethe digit.
Pressthe MENU”buttontoconfirmthe changes/ toexit the menu.
Set IPADDRESS, GATEWAY, NETMASK, DNSand PORT.
ChooseYES in RESETDEFAULTwillgo backtodefaultvalue of NETWORK.
14
(NETWORK)
SERVERIP
GATEWAY
NETMASK
DNS
WEBPORT
RESETDEFAULTNO
192.168.001.010
192.168.001.065
255.255.255.000
168.095.001.001
00080

MOTIONDETECTIONSETUP
1. Press “MENU “toenterthe menuset up, then “Down ”toCAMERAsetup.
2. Press ENTER”twicetoentertheMotionDetectionSetup.
3. Eachscreen displaysthe currentcamerapictureoverlaid withthe motion targets(asFigure1).
You can pushthe button Left ”or “Right ”, ”Up ”or “Down ”toadjustmotion detectionin ONorOFF.
4. The targetson eachmotionsetup can beturnedtoONorOFF individually. Toset up targets, using the
front panelbuttons:
àPress “ENTER”toconfirmthechannel
àPress “ENTER”toentermotion mode
▲Up--movesthe targetcursorup one rowatatime.
▼Down--movesthe target cursordownone rowatatime.
◄Left --movesthetargetcursorleft one column atatime.
►Right --movesthe target cursorright onecolumn at atime.
àPress “ENTER”toturnthe targetcursorONandpress “ENTER”again toturnthetarget cursorOFF. (Figure1-1)
Zoom –turnsalltargetsin the current rowONorOFF. (Figure1-2)
PIP –turnsalltargetson the screen ONorOFF. (Figure1-3)
5. Press “SLOW “button tosetup theSensitivitylistup to255 and “REC “button tosetup theSensitivitylistdownto000.
The default valueisset on 32.
NOTE:Sensitivityvalueisrelatedto motion and brightnesschange. Lowvalue(as001)meanshighersensitivity
onmotion andbrightness change. High value(as255)meanslowersensitivityon motionand brightness
change. Usercanchoose thesuitablesensitivityvalueindifferent locations.
NOTE: When motion triggerrecording settingisON, itcan automaticallyswitchfrom stand-bymode torecordmode.The
motion detection will change thescanningsequenceand showson the monitor.Therewillbe an action as
following:
Forexample : If themotionisdetected on Camera#1, itsrecording &scanning sequencewillbemorefrequent. The
sequencewillbeas1st, 2nd,1st,3rd, 1st, …16th. And channel1willshowon the screen. If 2ndcameraand 3rdcamera
bothmotion detection areactivated, theywillbe scanning as1st, 2nd,3rd, 2nd,2nd, 3rd, 3rd,2nd, 3rd, 4th, 2nd,3rd …and
viceversa. And CH2&CH3will showforaperiod of time whichissame asAlarmDuration time.
15
MOTION DETECTION

16
Figure1MOTIONDETECTIONSETUP
12 3 4 5 6 7 8 9 10 11 12 13 14 15
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
032
12 3 4 5 6 7 8 9 10 11 12 13 14 15
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Figure1-1MOTIONDETECTIONSETUP —1~15
032
12 3 4 5 6 7 8 9 10 11 12 13 14 15
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Figure1-2MOTIONDETECTIONSETUP--LINE
032
Figure1-3MOTIONDETECTIONSETUP--ALL
12 3 4 5 6 7 8 9 10 11 12 13 14 15
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
032
EVENT
Thereareonly16recordedeventswill be shownon asingle pageand pleasepress “◄”or “►”tochange the
pagesorpress ▲+ ▼to CLEARthe EVENTrecord. (MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
►EVENT
NETWORK
MHDD WARNING 2002-JAN-01 03:00:00
MHDD LOSS 2002-JAN-0103:00:00
MHDD ERROR2002-JAN-01 03:00:00
SHDD WARNING 2002-JAN-01 03:00:00
HDD FULL 2002-JAN-0103:00:00
SYSTEMERROR2002-JAN-0103:00:00
----02 VLOSS 2002-JAN-0103:00:00
----03 ALARM2002-JAN-0103:00:00
◄: PAGEUP ►: PAGEDOWN ▲+▼: CLEAR
M-HDD WARNING: MasterHDD mightbe failed.
M-HDD LOSS:MasterHDD doesnot exist.Nowusercan usetheotherHDD.
M-HDD ERROR: MasterHDD might beerror
S-HDD WARNING: SlaveHDD might be failed
S-HDD LOSS: SlaveHDD doesnotexist. Nowusercan usethe otherHDD.
S-HDD ERROR: SlaveHDD might beerror
HDD FULL: HDD isfull
SYSTEMERROR: Systemmight befailed
----02 VLOSS: Channel: 2Video loss
----03 ALARM: Channel: 3External I/OAlarmhavetriggered
POWERRESTORE: Powerrestore