MEI Cashflow 690 series Reference guide

Using the Multi-Function Program Keys
Each (Blue) key has two functions. General operation and
Menu function.
General Operation Menu Function
Dispense coin A Enter / Confirm
Dispense Coin B Scroll Up
Dispense Coin C Exit
Dispense Coin D Scroll Down
There are two configuration modes available. Service Mode
and Set-up mode.
Service Mode: gives access to the most frequently used
product configuration options. (See Service Mode Options)
Set-up Mode: gives access to general product
configuration options that are required when setting up your
changegiver. (See Set-up Mode Options)
To access either mode or to view tube audit data the mode
key will need to be pressed as shown below.
Quick press to access Service Mode
Press & Hold for 2 seconds. to access Set-up Mode
Press twice to view tube audit data. Only
operates when tube cassette is fitted.
Parking dispenser arms. Only operates when
tube cassette is not fitted
SERVICE MODE OPTIONS
Press Press Description / Action Press
Float-up coin tubes / Insert coins
Clear credit accumulated – (Not MDB) &
Clear Clean Me Message
Float level reset
Float down coin tubes
Float teach / Insert coins
Inhibit a coin / Insert a coin Reject
Lever
Enable a coin / Insert a coin
View coin details
View coin-set
Price Teach
Custom tube cassette teach
Pre-defined tube cassette teach Reject
Lever
THE LED HELP GUIDE
Changegiver OK
Changegiver OK
Normal power up sequence / Reset
Coin accepted / rejected
(Refer to Green LED codes)
Programme mode selected
(Refer to Green LED codes
Changegiver operation inhibited by VMC
Changegiver maintenance required
(Refer to Amber LED Codes)
Changegiver has no power or No power
loom connected. Is the power switched ON?
Faulty changegiver
(Take it out and return it for repair)
GREEN LED CODES
Mode
Button
Changegiver “MODE” button has been
pressed. Changegiver is now in service
mode.
Changegiver Set-up mode has been
activated.
AMBER LED CODES
The Amber LED helps you to diagnose changegiver
faults in the field.
The LED can flash between 0 and 4 times to indicate
a repairable fault to a specific changegiver module.
More information is given on a label, which is stuck
onto the separator solenoid bank.
Number of Flashes Module Requiring Service
Predefined Cassettes
Code A B C D
Mode DAA 10c 50c 20c 20c
Mode DAB 10c 10c 20c 20c
Mode DAC 10c 10c 20c 10c
Mode DAD 10c 50c 20c $1
Mode DBA 10c 50c 20c $2
Mode DBB 10c 50c 20c 10c
Mode DBC 10c 20c 20c $1
Mode DBD 10c 20c 20c 20c
Mode DCA 10c 20c $1 $2
Mode DCB NOT USED
Coin Accepted
Coin Rejected (not recognised)
Coin Rejected (Inhibited by machine
/changegiver program settings)
A

B

C

D

Mode
•
Discriminator
• Accept Gate
• Separator Top Level Sensors
•
Tube Cassette Top Level Prisms
1 x
2 x
3 x
4 x
•
Dispenser


A
B
C



D

Mode
Mode
Mode
Mode
Mode
Mode
G
On
Blinks Off
Flashing
On
Off
Alternating
Cycles
X 3
Flashing
Altering
Settings
1 x Blink
2 x Blinks
3 x Blinks
Coin accepted
Or Rejected
Slow Flash
Fast Flash






?
Part Number – TBA Rev R1
Mode
A
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
B
C
D
D
A
A
A
B
B
A
B
?
B
C
D
A
A
B
?
1.5s
Mode
Mode
Mode
Mode
Mode

D




Hold
2 sec
You are now in
Set Up Mode Menus
B




B
C
D
Enter / Confirm
Scroll Up
Scroll Down
Exit
A
Set-up Mode Menu Options
To access the
Set-up mode menu, press
and hold the mode button
for 2 seconds.
Press Key
Bto scroll Up.
Press Key
Dto scroll Down.
Set
-up Mode (Sub Menu Structure)
Full
Max
Flt
Low
Safe
Desig
Tube
Flt Lvl
Max Fill
Empty
Safe
1, 2 or 3
Set Active
No Cass
Pred (1
-10)
Cust (1
-2)
Cust 1 / Cust 2
A,B,C or D
NOTSET / Value
Tube Cfg Set Group Set Active Cass Set Cust. Cass Fill To Disp To
Confi
rm reset
Cancel
Spanish
Dutch
German
French
English
Free Vnd
Interims
Basic
View
Clear
Modify
Sel Report Print Lang
Prt Logo
Reset Optical
Password
Select Language
Settable (0
- 65534)
Yes / No
Settable (0
- 65534)
CCF- Currency
Conversion Factor
Reval Max Card Credit
CCF- Currency
Conversion Factor
Settable (0 - 65534)
Highest Value to
Accept
Settable (0 - 65534)
Max Bill Credit
Settable (0
- 65534)
0 (0%)
64 (100%)
National
Euro
Curr Nat
High Acceptance
High Security
Mode
Nat
Nat + Eu
Eu
Acceptance
Cn1 to Cn32
Coin Setup Chan Cfg
Acceptance
Threshold
Ch1 to Ch32
View Current Errors
View Log of Errors
View sw Version
View VMC Type
Strobe Status
Battery Status
Power Status
Temperature
EA Line
Blocker
Printer CTS
TLS Status
LLS Status
Set All Prices
Set Price Line
Vend Type
Single / Multi
Escrow Return
Yes / No
Overpay
Retained / Cleared
Opay Amnt
(0 - 65534)
Max Cred
(0 - 65534)
Price Display
Yes / No
Loom
Standard / Make T4
as a T3
EM Cfg
Vend Type
Single / Multi
Escrow Return
Yes / No
Overpay
Retained / Cleared
Opay Amnt
(0
- 65534)
Max Cred
(0
- 65534)
Price Display
Yes / No
Price H
old
VMC holds prices
Changer holds prices
Exec Cfg
Vend Type
Single / Multi
Escrow Return
Yes / No
OverPay
Retained / Cleared
Opay Amt
(0 - 65534)
Max Credit
(0 - 65534)
Price Display
Yes / No
BDV Cfg
MDB Level
Lvl 2
Lvl 3 No Feat
Lvl 3 All Feat
Escrow Return
Yes / No
MDB Cfg
Basic
Dispense.Float
Enabled / Inhibited
Mode B Changer
Options
Enabled / Inhibited
Mode C Price Teach
Enabled / Inhibited
Mode D
Enabled / Inhibited
Soft Options
Enabled / Inhibited
Keypad
Restore
Yes / No
Save
Yes / No
Settings
NOTE: - The Sub Menu Structure
shown here, displays only the
most commonly used options.
For the full menu structure, refer
to the CashFlow® 690 Field
Engineer’s Handbook.
Technical Assistance call;
NSW – 02 9793 2733
VIC, SA, WA - 03 9752 2730
QLD – 07 3279 5588
MEI Sales and Support
Tel: [phone]