Members Mark GL-11004-ARP User manual

Cabana day lounger with adjustable back
Model Number: GL-11004-ARP
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual

Dust often and use a vacuum cleaner crevice tool to clean seams. To maintain
the woven appearance, gently clean soiled areas with a soft cloth dampened
with a mild, water based detergent. Remove all lather and wipe with a clean
damp cloth. Dry with another soft cloth by blotting the damp surface (do not
rub).
Care and Cleaning
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Before Assembly
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.

Components
A....Front seat panel....1
B....Back seat panel....1
Hardware
(K)
Allen/Hex Head Bolt
M6x60mm
Qty: 8
(L)
Allen/Hex Head Bolt
M6x20mm
Qty: 4
(M)
M6 Washer
Qty: 12
E
C....Back panel 1....1
FH
D....Back panel 2....1
E....Back panel 3...1
F....Back panel 4....1
G....Seat cushion....1
H....Back connector panel....2
I .....Seat connector part....2
J.....Toss pillow....2
ABCD
G I
(N)
Allen Wrench
Qty:
J
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Attached the bottom of Back panel 1(C) to bottom of Back panel 2(D).
Step 1
C
D
D
C
Carefully place the Back panel 1(C) and Back panel 2(D) on a non-abrasive surface.
Attached the top of Back panel 1(C) to top of Back panel 2(D).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 2
D
C
D
C

Step 3
Attached the Back panel 1(C) to Back panel 2(D) using bolts (L) and washers (M) with
Allen Wrench (N).
Do not tighten the bolts until assembling is completed.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(L)
Allen/Hex Head Bolt
M6x20mm
Qty: 2
(M)
M6 Washer
Qty: 2
(N)
Allen Wrench
Qty:
H
L
C
D
C
D
M

Step 4
Carefully place the Back panel 3 (E) and Back panel 4(F) on a non-abrasive surface.
Attached the top of Back panel 3(E) to top of Back panel 4(F).
Step 5
Attached the bottom of Back panel 3(E) to bottom of Back panel 4(F).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
F
E
E
F
F
EE
F

Step 6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(L)
Allen/Hex Head Bolt
M6x20mm
Qty: 2
(M)
M6 Washer
Qty: 2
(N)
Allen Wrench
Qty:
Attached the Back panel 3(E) to Back panel 4(F) using bolts (L) and washers (M) with
Allen Wrench (N).
Do not tighten the bolts until assembling is completed.
H
L
E
F
M

Step 7
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
B
K
E/F
B
E
K
E
F
M
M
(K)
Allen/Hex Head Bolt
M6x60mm
Qty: 4
(M)
M6 Washer
Qty: 4
(N)
Allen Wrench
Qty:
Attached the Back panel 3 (E) and Back panel 4 (F) to Back seat panel (B) using bolts
(K) and washers (M) with Allen Wrench (N).
Do not tighten the bolts until assembling is completed.
B

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 8
(K)
Allen/Hex Head Bolt
M6x60mm
Qty: 4
(M)
M6 Washer
Qty: 4
(N)
Allen Wrench
Qty:
B
C/D
K
B
K
C
CD
M
M
Attached the Back panel 1 (C) and Back panel 2 (D) to Back seat panel (B) using
bolts (K) and washers (M) with Allen Wrench (N).
Tighten all bolts (K and L) with Allen wrench (N).

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step 9
A
I
I
I
B
A
Attached the Front seat panel (C) to Back seat panel (D) using Seat connector part
(I).