Members Mark BFW00501-3 Owner's manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Instructions & User's Manual
for
Members Mark Heritage 3pc Bistro Set
in Dove/in Indigo
Item Number:
Model Number: BFW00501-3 /BFW00501-3ID
Customer Assistance : 1-800-416-3511
or Email: [email protected]
(spare/replacement parts)
Page 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 2
Table of Contents
Quality Statement.............................................................3
Important Safety Information.............................................3
Before Assembly..............................................................3
Package Contents............................................................4
Product Information..........................................................5
Care & Use and Storage Instructions.................................12
Warranty Information.......................................................12
Swivel Rocker
Components................................................................6
Hardware....................................................................6
Tools..........................................................................6
Step1-Step3............................................................7-8
Components...............................................................9
Hardware...................................................................9
Tools..........................................................................9
Step1-Step4.........................................................10-11
Table

Before Assembly
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 3
Quality Statement
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and
separate each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
1Set / 2Ctn
Box1of2：
Box2of2：
Component Quantity
Description
A
B
C
Swivel Rocker
Table Leg
2
4
Component QuantityDescription
A1
A B
Page 4
Package Contents
A
Table Top
Leg Connector
Bracket 1
C

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Description Dimensions
Part No.
BFW00501 23.5" W *27.25" D *37" H 250lb per seat N
A.Foot Cap
FC0370 N/A N/A Y
Description Dimensions
Part No.
ALV19617Table N
A.Foot Cap
FC0030 N/A N/A Y
A
N/A
Page 5
Product information
29.75" RD * 28.75"H
A
Swivel Rocker
Weight
Capacity
Factory
Assembly
Weight
Capacity
Factory
Assembly

(H12)
HEX BOLT DRIVER
Qty: 1
PART NO:HW0006
Components
Hardware
A.
Part No.
Qty 1
CHAIR FRAME
SR0263
B
Part No.SR0264
Qty 1
.LEFT ARM
Tools
Page 6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
C. RIGH
Part No.
Qty 1
TARM
SR0265
(H11)
HEX WRENCH-2
HW0008
Qty:
PART NO:
1
(H10)
HEX WRENCH-1
HW000
Qty:
PART NO:
1
7
(H2)
5/16"X35MMBOLT
Qty: 4
PART NO:HW0820
(H4)
Ø8.0 X 2.3 MM SPRING WASHER
Qty: 4
PART NO:HW0003
(H9)
ROCKER PLATE
Qty: 2
FACTORY ASSEMBLY
PART NO:G0228
(H7)
5/16" NUT
Qty:
PART NO:HW0015
4
(H5)
Ø6.5 X 1.0 MM WASHER
HW0004
Qty: 6
PART NO:
(H1)
1/4"X30MMBOLT
Qty: 4
PART NO:HW0817
(H3)
1/4"X45MMBOLT
Qty:
PART NO:HW0805
2
(H6)
U" METAL PLATE
HW0760
Qty:
PART NO:
2
(H8)
Ø6.5 X 1.6 MM SPRING WASHER
Qty: 4
PART NO:HW0443
D BASE AND ROCKER
ASSEMBLY
SR0266
.
Part No.
Qty 1

(H12)
HEX BOLT DRIVER
Qty: 1
2x
H12
NOTE: Bolts must be FULLY .tightened
(H5)
Ø6.5 X 1.0 MM WASHER
Qty: 6
(H1)
1/4"X30MMBOLT
Qty: 4
(H3)
1/4"X45MMBOLT
Qty: 2
(H8)
Ø6.5 X 1.6 MM
SPRING WASHER
Qty: 4
Hand tighten only 2-3 turns.
Hand tighten only 2-3 turns.
H5
H3
H1
H5
H5
H1
H3
H5
4x
H12
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step7
Page 7
H8 H8

(H6)
U" METAL PLATE
Qty: 2
(H11)
HEX WRENCH-2
Qty: 1
(H10)
HEX WRENCH-1
Qty: 1
(H7)
5/16" NUT
Qty: 4
(H4)
Ø8.0 X 2.3 MM SPRING WASHER
Qty: 4
(H2)
5/16"X35MMBOLT
Qty: 4
"U" BAR "U" BAR
H6
H7
H4
H2
Hand tighten only 2-3 turns.
H10
NOTE: Bolts must be
FULLY .tightened
AB
CD
E
"U" BAR
Step 3
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Page 8
H11
CAUTION:
1.Note the horseshoe shape of the rocker plate. Point the open end of the horseshoe away from you. The arrows
on the rocker assembly should be pointing towards you.
2.Failure to place "U" metal plates (H6) under the rocker plates and above the "U" bar exactly as shown in
diagram will cause the bolt heads and nuts to damage the structure of the rocker plates and the "U" bar. Damage
due to over tightening of bolts or improper assembly could cause injury and may void your warranty.

Components
Hardware
A.
Part No.
Qty 1
TABLE TOP
AT52625
B
Part No.
Qty 1
.LEG CONNECTOR BRACKET
AT52262
C.
Part No.
Qty 4
TABLE LEG
AT52627
Tools
(H4)
HEX BOLT DRIVER
Qty:
PART NO:HW0006
1
(H1)
1/4"X20MMBOLT
Qty: 8
PART NO:HW0802
Page 9
(H2)
1/4"X28MMBOLT
Qty: 8
PART NO:HW0808
(H3)
Qty: 16
Ø6.5 X 1.0 MM WASHER
PART NO:HW0004

outer carton
(H1)
1/4"X20MMBOLT
Qty: 8
(H3)
Qty:
Ø6.5 X 1.0 MM WASHER
8
H1
H3
(H2)
1/4"X28MMBOLT
Qty: 8
(H3)
Qty:
Ø6.5 X 1.0 MM WASHER
8
H2
H3
Hand tighten only2-3 turns.
Hand tighten only2-3 turns.
Step 1
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Step1-Step4
Page 10