Members Mark GC-31062-2PK Owner's manual

1 | P a g e
Assembly Instructions & User’s Manual
For
Member’s Mark 2pk Halstead serving bar chair
Item Number: 990018805
Model Number: GC-31062-2PK
Customer Assistance (spare/replacement parts): 1-888-691-2824
or Email: [email protected]
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

2 | P a g e
Table of Contents
Quality Statement ....................................................................................................................................3
Important Safety Information................................................................................................................3
Before Assembly .....................................................................................................................................3
Care & Use.................................................................................................................................................3
Package Contents ...................................................................................................................................4
Product Information ................................................................................................................................4
Components..............................................................................................................................................5
Hardware....................................................................................................................................................5
Tools ...........................................................................................................................................................5
Step 1 .........................................................................................................................................................6
Step 2 .........................................................................................................................................................7
Warranty Information..............................................................................................................................8

3 | P a g e
Quality Statement
Important Safety Information
Please read all instructions carefully before assembling this product.
Where applicable, and for your safety, assembly by an adult is strongly
recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Care & Use
Use a soft, clean cloth that will not scratch the surface when cleaning.

4 | P a g e
Package Contents
Component
Description
Quantity
Component
Description
Quantity
A
Chair frame
1
D
Allen/Hex Head Bolt
M6x25mm
8
B
Chair base
1
E
M6 Washer
8
C
Supporting bar
1
Product Information
Product Dimensions
Chair: 20.75"x24.6"x40.5" (52.7cm x 62.5cm x 102.9cm)
Product Weight Capacity
Chair: Supports up to 250 lbs. (114kg)
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

5 | P a g e
Components
(A)
Chair frame
Qty: 1pc
(B)
Chair base
Qty: 1pc
(C)
Supporting bar
Qty: 1pc
Hardware
(D)
Allen/Hex Head Bolt
M6x25mm
Qty: 8pcs
(E)
M6 Washer
Qty: 8pcs
Tools
(F)
M6 Allen Wrench
Qty: 1pc
Need Assistance? Visit us at: samsclub.com/membersmarkhelp