Members Mark 264-8131B-96 User manual

Corrine Push Back Recliner
Model Number: 264-8131B-96
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual

Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Before Assembly
Care and Cleaning
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Clean spills / marks immediately, as stains are harder to remove
when they are left unattended.
For persistent stains and overall cleaning, contact a professional
upholstery cleaning company.

Components
A.......... ..........1
..........1
B..........
A
CD
B
Seat Cushion
Back Cushion
C.......... ..........2
..........2
D..........
Front Wood Legs
Back Wood Legs
A
B
Hardware
(H4)
Hex Wrench
Qty: 1
(H2)
Spring Washer
Qty: 4
(H3)
Flat Washer
Qty: 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(H1)
5/16"x3" L
Screw
Qty: 4

Step 1
Remove all parts from the carton and place them on a protected surface or carpet.
Take out the wood legs (C & D) at the bottom of the Seat Cushion (A).
A
C D
B
B
A
A
A
A
B
B
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

(H1)
5/16“x80mm L
Screw
Qty: 4
(H4)
Hex Wrench
Qty: 1
(H2)
Spring Washer
Qty: 4
(H3)
Flat Washer
Qty: 4
Correct side view Correct back view
Incorrect side view Incorrect side view
Step 2
B
A
A
B
A
C
D
H3
H2
H1
H4
A
When assembling the wood legs (C&D), align the hole at the bottom of the Seat
Cushion (A) with the wood dowel onto the wood legs first, then attach wood legs (C&D)
to the bottom of the Seat Cushion (A) using 5/16'' × 3-1/8'' (80mm) L (H-1) screws,
Spring Washer (H-2) and Flat Washer (H-3) with Hex Wrench (H-4) as shown.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Step 3
Attach the Back Cushion (B) to the Seat Cushion (A) by sliding the receivers into the
mechanism posts located on the Seat Cushion (A). From the front of the recliner, press
down on both sides of the Back Cushion (B) to firmly secure. The Back Cushion (B)
and Seat Cushion (A) will automatically lock into place. Then pull the back flap down
tightly and attach the back flap to the bottom of the Seat Cushion (A).
B
A
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Step 4
SIT TV POSITION FULL RECLINE
While seated, push onto the back cushion to recline. It will move backwards raising
the footrest at the same time. To return the footrest to the closed position, apply more
weight onto the footrest.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp