Members Mark 12x16 Salemo TPGAZ2204 Owner's manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Customer Assistance (spare/replacement parts):1-800-847-7508
or Email: [email protected]
Item Number: 980295691
Model Number:TPGAZ2204
DISCLAIMER: Supplier is fully responsible for the entire content of the assembly
manual, including all Sam’s Club suggested edits or revisions.
Assembly Instructions & User’s Manual
for
Member’s Mark [12'x16'Salemo Hardtop Gazebo]
1
TM

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
2
Table of Contents
Quality Statement ..........................................................................................3
Important Safety Information..........................................................................3
Before Assembly............................................................................................3
Care & Use.....................................................................................................3
Product Information........................................................................................3
Components...................................................................................................4
Hardware........................................................................................................7
Tools...............................................................................................................7
Step 1 – Step 4...............................................................................................8
Warning..................................................................................................23
Danger....................................................................................................23
Care & Use and Storage Instructions.............................................................23
Warranty Information......................................................................................24

Product Information
Product Dimensions:197.64” x 149.61” x 121.26” (502cm x 380cm x 308cm)
Product Weight Capacity: Supports up to 220lbs(100kg)
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
3
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Before Assembly
Care & Use
Quality Statement
Important Safety Information
Please read all instructions carefully before assembling this gazebo.
For your safety, assembly by two or more adults is strongly recommended.
Hardware may loosen overtime. Periodically check that all connections are tight.
NOTICE: To prevent injury and property damage from unexpected tipping of
furniture, we highly recommend installation of the anti-tip kit included with this
product.
For cleaning, use a mild detergent solution, rinse with water, and allow to air dry.
Do not use acetone, abrasive, or other special detergents as they would be harmful
to the product’s finish.
Due to the nature of metal, surface oxidation (rusting) will occur if this protective
coating is scratched.
This is a natural process. To minimize this condition, it is recommended that care
be taken when assembling and handling the product in order to prevent the paint
from being scratched.

Left-Lintel
A1
A2 Right-Lintel
A3 ShortLintel
Connector 6
B
Corner cover
C2
C1
Lintel Cover
D
Connection
Piece
EPost
4
4
2
FBase Plate
GBase Cover
HCorner
Connector 4
4
4
4
6
4
8
ISlanting Bar
Connector 4
Components
J1 Left-Support
Bar
4
J2 Right-Support
Bar
4
M
M1
Top Frame
Top
Connecting
Tube
2
2
N
Small Top
Lintel #2
Center Cover
Center
Connector
Hook
Small Top
Lintel #1
2
2
O
1
Q2
1
3Q
1
1Q
R1
R2
S
Small Top
Support Bar
Small Top
Center Bar
4
2
Long-Top Bar 4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
4

WL
Roof Framing
Beam-
Left Bottom
4
4
WR
X
X1
Y1
Y2
Y3
Roof Framing
Beam-
Right Bottom
Roof Framing
Beam-
Upper Middle
and Middle Top
Roof Framing
Beam-
Lower Middle
4
8
AA Big Top Pane
-Left
Big Top Pane
-Left
Big Top Pane
-Right
Big Top Pane
-Right
Big Top Pane
-Middle
Big Top Pane
-Middle
Big Top Pane
-Middle
AB
AC
Roof Framing
Beam-
Small Top
Roof Framing
Beam-
Left Small Top
Roof Framing
Beam-
Right Small Top
2
2
2
AD 4
T
UL
UR
VL
VR
Roof Framing
Beam-Left Top
Roof Framing
Beam-Right Top
Roof Framing
Beam-
Left Middle
Roof Framing
Beam-
Right Middle
Short-Top Bar 8
4
4
4
4
4
4
31" / 790mm
4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
5
AE 4
4
2
AF
AK
31" / 790mm
51" / 1295mm
51" / 1295mm
70" / 1780mm
70" / 1780mm
22.165" / 563mm
22.165" / 563mm
40.75" / 1035mm
40.75" / 1035mm
35.4" / 900mm

Panel Cover-
Big Top
BC 4
DA Edge Cover-
Left 4
Edge Cover
FB Mosquito
Netting 1
Edge Cover-
Right
DB
EB
EA
DC
DE
DF
4
2
8
4
Air Vent
1
FA
“L”Shape
Cover
“L”Shape
Cover
2
2
Short Edge
Sealing
-Small Top
Long Edge
Sealing
-Small Top
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
6
AH
Big Top Panel
Small Top Panel
Small Top Panel
2
AG
Small Top Panel 2
2
2
AI
AJ
AL Small Top Panel 2
BA Roof Cover-
Small Top 4
Panel Cover-
Big Top
BB 4

GA Bolt\Flat
Washer (m6*15) 302
Stake
Hook
8
16
56
Bolt\Plastic
Washer (m6*15) 72
46
GB
GC
Bolt\Plastic
Washer (m6*35)
10
GD
GE
GF
GG
GH
GI
GL
GM
Bolt\Flat
Washer\ Nut
(m6*35)
8
Bolt\Plastic
Washer (m6*40)Screw
14
Bolt\Plastic
Washer (m6*20)
Bolt\Flat
Washer\ Nut
(m6*55)
12
Bolt\
Washer (m6*20) 24
Flat
Hardware
Tools
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
7
Part No:GJ
Wrench (Included) Allen Wrench (Included) Hammer(Not Included)
Qty: 2Part No:GK Qty: 1
Safety goggles
(Not Included)
Screwdriver
(Not Included)
Stepladder
(Not Included)
Electric drill
(Not Included)
Gloves
(Not Included)
Hardhat
(Not Included)

GA
GB
Bolt\Flat
Washer (M6X15) 130PCS
24PCS
Bolt\Flat
Washer (M6X20)
GA
GB
GA
F
G
E
E
H
GB GB
EE
HH
G
E
Fig 2
Fig 2
Fig 1
Fig 1
H
Step 1
1-a. Insert the Post (E) into the Base Cover (G), then connect the Base Plate (F) to the
Post (E) by Bolt\Flat Washer M6*15 (GA), as per Fig 1. Connect the Corner Connector (H) to the
Post (E) by Bolts\Flat Washer M6*20 (GB), as per Fig 2. Connect the other Posts in the same way.
.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
8

A1
A1
A3
A3
A3
A3
A1
A1
A1
D
D
DD
D
D
D
B
B
B
A1 A2
A2
A2 A2
GA
GA
GA
GA
GA
GA
A2A2
A2
A2
A2
Fig 3
A2
A3
1-b. Insert the Hook (GM) into the track of Right Lintel (A2). Insert the Connector (B) into Left Lintel
(A1)/Right Lintel (A2), at the same time connect it to Left Lintel (A1)/Right Lintel (A2) by the Connector
(B) with \Flat Washer M6*15 (GA)Bolt (GA). Insert the Hook (GM) into the track of Right Lintel (A2).
Insert the Connector (B) into Left Lintel (A1)/Short Lintel (A3), at the same time connect it to Left
Lintel (A1)/Short Lintel (A3) by the Connector (B) with Bolt \Flat Washer M6*15 (GA).
Insert the Connector (B) into Right Lintel (A2)/Short Lintel (A3), at the same time connect it to
Right Lintel (A2)/Short Lintel (A3) by the Connector (B) with \Flat Washer M6*15 (GA). See Fig.3
GM
×12PCS
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
9
GM
×16PCS

E
E
A2
A3
J2
5giF
4giF
A1
1-c. Connect the Left Lintel (A1) to the Corner Connector (H) by Bolts\Flat Washer M6*15 (GA).
Connect the Right Lintel (A2) to the Corner Connector (H) by Bolts\Flat Washer M6*15 (GA),
as per Fig4.
Equal diagonal distance
E
E
E
E
J1 A1
A1
A2
A2
A3
A3
A2
A1
A1
A2
J1
J2
J2
J2
J1
J1
1-d. Attach the Support Bar (J1/J2) to the Lintel (A1/A2) and Post (E) by Bolts\Flat Washer M6*15 (GA),
as per Fig 5.
A2
E
H
H
GA
A2
GA
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
10
E

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
11
1-e. Attach the Slanting Bar Connector (I) to the Post (E) by Bolts\Flat Washer M6*20 (GB),
as per Fig 8.
1-f. Attach the Lintel Cover (C2) to the
Lintel (A1/A2/A3) by Bolt\Flat Washer
M6*15 (GA),as per Fig 9
Fig 8
6giF
A1
J2
A2
E
E
GB
I
GA
Fig 7
GA
J1
E
A1
A2
GA
GA
GE
Bolt\Flat
Washer (M6X15)
Bolt\FlatWasher
\Nut (M6X55)
36PCS
8PCS
Fig 9
Step 2
GA
A1 A2
C2
GA
A1/A3 A3/A2
C2

M
M
M1
M1
2-a. Connect the Top Frame (M) and Top connecting Tube (M1) by Bolts \Flat Washer
M6*15 (GA) .as the Fig 10.
GA
S
M
M1
A2
A2
A2
A1
A1
A1
M
M
M1
M1
A3
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
12
GA
GA
GA
Fig 10

M
A2
A1
GA GA
GE
S
S
Connect the Long-Top Bar (S) to the Top Frame (M) by Bolts\Flat
Washer M6*15 (GA).see Fig.11-12
2-b.Connect the other end of Long-Top Bar (S) to the Slanting Bar connector (I) by Bolts\Flat
Washer\Nut M6*55 (GE).
T
M1
A1/A2/A3
Fig 13 Fig 14
T
D
GA
GA
2-c. Connect the Short-Top Bar (T) to the Top Connecting Tube (M1) by Bolts\Flat Washer M6*15 (GA),
as per Fig 13.
Connect the other end of Short-Top Bar (T) to the Connection Piece (D) by Bolt\Flat Washer M6*15 (GA),
as per Fig 14. Connect other sides in the same way.
A4
A1
A2
T
T
S
A3
A4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
13
Fig 11 Fig 12

Step 3
Q2
(GD）(GE）
Bolt\Flat
Washer (M6X55)
Bolt\Flat
Washer\Nut (M6X35)
R1
N
O
R1
R1
R1
(GH)
Bolt\Plastic
Washer (M6X35)
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
14
(GC)
Bolt\Plastic Washer (M6X40)
Qty: 2
Qty: 8 Qty: 6
Bolt\Plastic Washer (M6X15)
(GF)
Qty: 16
Bolt\Flat Washer (M6X15)
(GA)
Qty: 136
Qty: 8
(GJ)
Wrench
Qty: 2

Fig 15 Fig 16
Fig 17 Fig 18
N
O
R1
R1
Q2
Q3
R1
GE
Q2
N
GD
O
3-a. Attach the Small Top Lintel #1 (N) to the Small Top Lintel #2 (O) by Bolts \Flat Washer\
Nut M6*35 (GD), as per Fig 15.Connect the Small Top Support Bar (R1) with the Center Connector
(Q2) by bolts\Flat Washer\ Nut M6*55 (GE).
Screw the Hook (Q3) to the Center Connector (Q2),see Fig.16-18
Q2
NR2
M1
O
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
15

Fig 19
Fig 20
Fig 21 Fig 22
Fig 23
See Fig.19-20
See Fig.21-22
See Fig.23
N
N
O
GA M1
GA
Q2
GE
R2 GA R2
M1
3-b.Connect the Small Top Lintel #1 (N) to the Top Connecting Tube (M1) by Bolts \Flat Washer
M6*15 (GA) ，
Connect the Small Top Center Bar (R2) to the Top Connecting Tube (M1) by Bolts
\Flat Washer M6*15 (GA),
Connect the Small Top Center Bar (R2) to the Center Connector (Q2) by Bolts
\Flat Washer\
Nut M6*55
(GE).
R2 R1
Y3
Y1
Y2
R1
GA
GA
Y1
Y3
Y2
GA R2
GA
Y2
3-c. Connect the Roof Framing Beam- Right Small Top (Y2) /
Roof Framing Beam- Small Top（Y3) to the Support Bar (R1),
connect the Roof Framing Beam- Left Small Top(Y1)/
Roof Framing Beam- Right Small Top(Y2)
to the Small Top Center Bar (R2) by Bolts
\Flat Washer M6*15 (GA).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
16

Fig 24
Q1
AL
AH AJ
AH AJ AI
GF
Y1/Y2
GF
Plastic
Washer
Y3
the connected shape of steel top panel
3-d. Assemble the Small Top Panels (AH, AJ, AI) in sequence, fix them on the Roof Framing Beam-
Left Small Top(Y1)/ Roof Framing Beam- Right Small Top(Y2) with Bolt\Plastic Washer M6*15 (GF),
then install the Small Top Panel (AL), attach on the Roof Framing Beam- Small Top (Y3) with Bolt\Plastic
Washer M6*15(GF).
as per Fig 24.
AL
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
17
Plastic
Washer

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
18
Fig 25
3-e. Connect the Roof Cover- Small Top (BA) to the Small Top Support Bar (R1) by Bolt\Plastic Washer
M6*35 (GH), connect the Centor Connector (Q2) to the Center Cover (Q1) by Bolts\Flat Washer
M6*40(GC), connect the Long Edge Sealing-Small Top (DF) to the
Roof Framing Beam- Left Small
Top(Y1)/ Roof Framing Beam- Right Small Top(Y2)
by Bolts \Flat Washer (GA), then connect the
Short Edge Sealing-Small Top (DE) to the Roof Framing Beam- Small Top (Y3) by Bolts \Flat Washer
M6*15(GA), See Fig.25
BA
Q1
Q2
GC
DE
DF
BA
GH
GA
GA
UL
UL
VL VL
WL WL
UR
UR
VR
VR
WR
WR
XX
X
X
X1 X1
Plastic
Washer

3-f. Connect the Roof Framing Beam-Left Top/ Roof Framing Beam-Left Middle (UL/VL) to the
Long-Top Bar/Short-Top Bar (S/T) by Bolts
\Flat Washer M6*15 (GA).
Connect the Roof Framing Beam-Right Top/ Roof Framing Beam- Right Middle (UR/VR) to the
Long-Top Bar/Short-Top Bar (S/T) by Bolts
\Flat Washer M6*15 (GA).
Connect the Roof Framing Beam- Upper Middle and Middle Top (X) to the Short-Top Bar (T) by
Bolts\Flat Washer M6*15(GA).
3-g. Connect the Roof Framing Beam- Right Bottom (WR) and Roof Framing Beam-Left Bottom(WL)
to the Long Top Bar (S) by bolts
\Flat Washer M6*15 (GA).
Connect the Roof Framing Beam-Left Bottom/Roof Framing Beam- Lower Middle(WL/X1) and
Roof Framing Beam- Lower Middle / Roof Framing Beam- Right Bottom(X1/WR) to the Short Top
Bar (T) by bolts \Flat Washer M6*15(GA).
S
UL/VL
GA
X
GA
GA
T
T
T
T
GA
GA
UR/VR
GA
S
GA
GA
GA
GA
WL/X1
X1/WR
GA
GA
A1/A3
A3/A2
GA
WR
WL
ST
GA
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
19
Fig 26
Fig 27
See Fig.26
See Fig.27

Step 4
AA AC AE AF AD AB
12' side
16' side
AA AC AE AF AD AB
AKAG
(GC)
Bolt\Plastic Washer (M6X40)
Qty: 8
(GI)
Screw
Qty: 46
Bolt\Plastic Washer (M6X15)
(GF)
Qty: 56
Bolt\Plastic Washer (M6X20)
(GG)
Qty: 12
(GJ)
Wrench
Qty: 1
(GK)
Allen Wrench
Qty: 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
20