Mercedes-Benz Voice Control System User manual

Voice Control System
Operation Guide
Bestell-Nr. 6515 9726 13 Teile-Nr. 219 584 95 71 USA Edition A 2007
2195849571

Welcome to Voice Control!
Please familiarize yourself with these oper-
ating instructions and the Voice Control
System before attempting to operate it
while driving. This will help you derive a
greater benefit from the system and avoid
exposing yourself and others to dangers.
We continuously strive to improve the
Voice Control System and we ask for your
understanding that we reserve the right to
make changes in design and equipment.
Therefore, information, illustrations and
descriptions in this operation guide might
differ from your vehicle. Optional equip-
ment is marked with an asterisk (*).
If there are any equipment details that are
not shown or described in these operating
instructions, or if you have any questions
regarding the descriptions or the operation
of the Voice Control System, your autho-
rized Mercedes-Benz Center will be happy
to assist you.
This operation guide forms an integral part
of the vehicle and should always be kept
inside the vehicle where the guide will be
handy for your reference. Please also pass
the guide to the new owner if the vehicle is
sold.
We extend our best wishes for many miles
of safe, pleasurable driving.
Mercedes-Benz USA, LLC
A DaimlerChrysler Company
Service and Literature
Your authorized Mercedes-Benz Center has trained technicians and original Mercedes-Benz parts to service your vehicle properly.
For expert advice and quality service, contact your authorized Mercedes-Benz Center.
If you are interested in obtaining service literature for your vehicle, please contact an authorized Mercedes-Benz Center.
We consider this the best way for you to obtain accurate information for your vehicle.
For further information you can find us on the Mercedes-Benz web-site www.mbusa.com or www.mercedes-benz.ca.
We reserve the right to modify the technical details of the vehicle as given in the data and illustrations of this Operation Guide.
Reprinting, translation and copying, even of excerpts, is not permitted without our prior authorization in writing.
Press time MAY 31, 2006
GSP/TIP
Printed in Germany
Warning! G
To help avoid personal injury, be extremely careful when performing any service work or repairs. Improper or incomplete service or the use of
incorrect or inappropriate parts or materials may damage the vehicle or its equipment, which may in turn result in personal injury.
If you have any questions about carrying out any type of service, turn to the advice of an authorized Mercedes-Benz Center.

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . 2
Where to find it . . . . . . . . . . . . . . . . . . . 2
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating safety. . . . . . . . . . . . . . . . . . . 4
Getting started. . . . . . . . . . . . . . . . . . . 5
Introduction . . . . . . . . . . . . . . . . . . . . . . 5
Command types . . . . . . . . . . . . . . . . 5
Active system . . . . . . . . . . . . . . . . . . 5
Controls . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operation via
the multifunction steering wheel . . . 6
Setting volume level . . . . . . . . . . . . . 7
Displays . . . . . . . . . . . . . . . . . . . . . . 7
Controls in detail . . . . . . . . . . . . . . . . . 8
Telephone*. . . . . . . . . . . . . . . . . . . . . . . 8
Telephone operation. . . . . . . . . . . . . 8
Telephone commands. . . . . . . . . . . . 9
Phone book operation . . . . . . . . . . 12
Phone book commands . . . . . . . . . 12
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Radio operation . . . . . . . . . . . . . . . 16
Radio commands . . . . . . . . . . . . . . 16
CD changer*/CD player. . . . . . . . . . . . 20
CD changer/
CD player operation . . . . . . . . . . . . 20
CD changer/
CD player commands . . . . . . . . . . . 20
MP3 player . . . . . . . . . . . . . . . . . . . . . . 21
MP3 player operation . . . . . . . . . . . 21
MP3 player commands . . . . . . . . . . 21
Command list . . . . . . . . . . . . . . . . . . . 22
Command list . . . . . . . . . . . . . . . . . . . . 22
General commands. . . . . . . . . . . . . 22
Telephone* commands. . . . . . . . . . 23
Audio commands . . . . . . . . . . . . . . 24
MP3 player commands . . . . . . . . . . 26
Sub commands. . . . . . . . . . . . . . . . 26
Practical hints . . . . . . . . . . . . . . . . . . 27
What to do if... . . . . . . . . . . . . . . . . . . . 27
Help function . . . . . . . . . . . . . . . . . 27
Help commands . . . . . . . . . . . . . . . 27
Help screen. . . . . . . . . . . . . . . . . . . 27
Entering digits and spelling. . . . . . . 27
Preferences. . . . . . . . . . . . . . . . . . . . . 30
Help screen . . . . . . . . . . . . . . . . . . . . . 30
Individualization . . . . . . . . . . . . . . . . . . 31
Index . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2
Introduction
Where to find it
This operation guide is designed to provide
comprehensive support information for
you, the user of the Voice Control System.
For fast access to information, each sec-
tion has its own color guide:
Getting started
Here you will find an overview of all the fea-
tures. If this is the first time you are driving
a Mercedes-Benz vehicle equipped with
Voice Control, you should read this section
first.
Controls in detail
Here you will find detailed information
about all functions of Voice Control. This
section expands on the “Getting started”
section.
Command list
Here you will find a listing of all the com-
mands available for use with Voice Con-
trol.
Practical hints
This section provides fast assistance for
dealing with problems you may encounter.
Preferences
Here you will find information on available
configuration options.
Index
The index is designed to help you find infor-
mation quickly and easily.

3
Introduction
Symbols
The following symbols are found in this op-
eration guide:
*Optional equipment is identified
with an asterisk. Since standard
equipment varies between models,
the descriptions and illustrations in
this manual may differ slightly from
the actual equipment of your vehi-
cle.
! Highlights hazards that may result in dam-
age to the Voice Control System and/or your ve-
hicle.
i Helpful hints or further information you may
find useful.
왘This symbol points to instructions for
you to follow.
왘A number of these symbols appearing
in succession indicates a multiple-step
procedure.
컄page This symbol tells you the page
reference where additional in-
formation on a given subject is
available.
컄컄 The continuation symbol marks
a procedure which is continued
on the next page.
Warning! G
Warning notices draw your attention to haz-
ards that may endanger your health or life,
or the health or life of others.
sThis symbol stands for com-
mands and voice entries you are
speaking.
tThis symbol stands for voice out-
put by the system.
uThis symbol indicates that infor-
mation is available on the
COMAND display.

4
Introduction
Operating safety
Warning! G
Please devote your attention first and fore-
most to the traffic situation you are in. While
the system permits hands-free phone oper-
ation, attention to traffic may be diverted
not only by physical operation of a phone,
but also by the distraction of a phone con-
versation while driving. As such, for safety
reasons, we encourage the driver to stop the
vehicle in a safe place before answering or
placing a phone call.
For safety reasons, you should only select a
destination when the vehicle is stationary.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their ob-
servance always remains in the driver’s per-
sonal responsibility. DVD maps do not cover
all areas nor all routes within an area.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 13.5 m) every second.
Warning! G
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
Warning! G
Please do not use the Voice Control System
in an emergency, as the tone of your voice
may change in a stressful situation. This
could cause a delay in completing your
phone call in a timely manner. This could
distract you in an emergency situation and
cause you to be involved in an accident.

5
Getting started
Introduction
The Voice Control System gives you the ca-
pability to control the following systems on
your vehicle using spoken commands:
앫Telephone*
앫Audio (radio, CD player (Audio-CD,
MP3-CD) and CD changer* (Audio-CD,
MP3-CD))
You control these systems using spoken
commands. Moreover, controls such as
the buttons on the multifunction steering
wheel (컄page 6) allow you to keep your
hands on the steering wheel.
The command vocabulary consists of
approximately 250 ready to use phrases.
The Voice Control System recognizes com-
mands and number sequences, irrespec-
tive of the speaker. To optimize speech
recognition for your voice follow the indi-
vidualization process (컄page 31).
The commands and digit sequences can be
spoken without pausing between the indi-
vidual words. If an unavailable or incorrect
command is used, the Voice Control Sys-
tem will prompt you for a new command by
asking “Please repeat” or announcing “No
such device”.
In order to provide for a safe and comfort-
able dialog, the Voice Control System ac-
knowledges important commands.
The Voice Control commands can be cate-
gorized as:
앫General Commands
These are commands always available
to you as soon as the Voice Control
System is activated (for example
“Help” commands).
앫Local Commands
These are commands available only for
the currently active system (for exam-
ple commands to control the CD play-
er).
For a complete list of commands
(컄page 22).
i During Voice Control System operation visu-
al help windows also appear in the COMAND dis-
play (컄page 30).
The active system is the system currently
shown in the COMAND display.
If, for example, you listen to the radio while
the telephone system is active on the
COMAND display, you have to switch to
the radio using the command “Radio” be-
fore you can operate the radio.
i With the command "Map" you can switch to
the Navigation* map on the COMAND display at
any time.
Command types
Active system

6
Getting started
Controls
E-Class illustrated, other models slightly
different
Activating Voice Control
왘Switch on the ignition.
See your vehicle’s Operator’s Manual for
information on starter switch positions.
왘Switch the COMAND on (see your sep-
arate COMAND Operator’s Manual).
왘Briefly pull operating lever to
position !.
An audible tone (beep) confirms the ac-
tivation of the system.
왘Speak a command.
Cancelling Voice Control
왘Briefly push operating lever to
position 0.
or
왘Speak the command “Cancel” (except
for speaking voice entries or carrying
out individualization).
i Voice Control can be cancelled at any time,
even during a dialog. Please note that if the Voice
Control System is cancelled during a dialog, then
the complete procedure is stopped and Voice
Control is cancelled.
Operation via the multifunction
steering wheel
Item Page
1Briefly push operating lever
0to cancel Voice
Control
6
2Briefly pull operating lever
!to activate Voice
Control
to accept an incom-
ing call
6
Setting the volume
Press button:
3ævolume up 7
4çvolume down 7
Telephone
Press button:
5sto accept an incom-
ing call
to dial
to redial
8
6tto end a call
to reject an incoming
call
8

7
Getting started
Controls
왘Activate Voice Control System.
왘Speak a command, for example “Help”.
왘Press button æ or ç. The vol-
ume is increased or decreased during
voice output.
or
왘Set volume for voice output using the
volume control button on COMAND
(see your separate COMAND Opera-
tor’s Manual).
COMAND display
In addition to the acoustic help function,
an optical help function (VC Tips) is avail-
able on the COMAND display (컄page 30).
Upon activating the Voice Control System,
the most important available commands
for the currently active system appear on
the COMAND display.
i These commands also appear on the display
by briefly pushing the operating lever to 'off'.
E-Class illustrated, other models slightly
different
1COMAND display
Multifunction display
For example: telephone numbers are
shown on the multifunction display while
dialing when the main “Telephone*” menu
is selected in the control system.
E-Class illustrated, other models slightly
different
1Multifunction display
Setting volume level Displays

8
Controls in detail
Telephone*
The Voice Control System gives you the
following capabilities:
앫Enter a telephone unlock code
앫Dial a phone number by speaking the
telephone number
앫Create a personal phone book with up
to 80 entries (컄page 12)
앫Dial a phone number by speaking the
name of a phone book entry
(컄page 13)
앫Delete a phone book entry from the
phone book
앫Have the system read out the phone
book entry by entry
앫Redial names and numbers
앫Manage and access an automated an-
swering system/voice mail box
The Voice Control System detects whether
앫your telephone is switched on
앫the corresponding mobile network is
logged in
앫it is possible to dial
If dialing is not possible, the Voice Control
System will advise you accordingly.
i You can continue operating your cellular
phone using the keypad on your phone.
Before you can operate the telephone us-
ing the Voice Control System, you have to
activate the Voice Control System
(컄page 6).
Warning! G
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.
If you nonetheless choose to use the cellular
phone while driving, please use the hands-
free feature and be sure to pay attention to
the traffic situation at all times. Use the cel-
lular phone only when road, weather and
traffic conditions permit.
Bear in mind that at a speed of just 30 mph
approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Warning! G
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.
Telephone operation

9
Controls in detail
Telephone*
For a complete list of commands
(컄page 22).
“Telephone”
Use the command “Telephone” to activate
the telephone system. Use this command
if you want the digits you are entering to
appear on the COMAND display.
“Help Telephone”
The Voice Control System features a com-
prehensive help function.
Use the command “Help Telephone” and
the Voice Control System will read out an
option list of available functions and com-
mands that can be used in conjunction
with the telephone (컄page 27).
“Enter unlock code”
Use the command “Enter unlock code” to
input the code to unlock your telephone.
After speaking the command, you are
prompted to enter the code.
왘Speak the code
앫as a continuously spoken string of
digits, or
앫in digit blocks of three to five digits.
Digits from “Zero” to “Nine” may be used.
After each digit block (separate the digit
blocks by using an approximately
0.5 second pause), the Voice Control Sys-
tem repeats the recognized digits and
waits until you continue speaking.
Sample dialog:
i GSM phones only: If the incorrect unlock
code is entered three consecutive times, the
phone card is blocked. You can unblock the
phone card using the PUK (Personal Unblocking
Key) to unblock the card. The PUK can only be
entered using the keypad on your telephone (see
separate operating instructions for your cellular
telephone).
“Dial number”
You can dial a phone number using the
command “Dial number”.
Digits from “Zero” to “Nine” may be used.
The phone number must be spoken
앫as a continuously spoken string of dig-
its
or
앫in digit blocks (three to five digits in
each block).
After each digit block (separate the digit
blocks by using an approx. 0.5 second
pause), the Voice Control System repeats
the recognized digits and waits until you
continue speaking.
When dialing 1-800 numbers, you may pro-
nounce the first four digits as “One eight
hundred” and the system will recognize the
spoken entries as “One eight zero zero”.
All other numeric entries must be spoken
as individual numbers.
Telephone commands
sEnter unlock code
tEnter code
sZero zero one one
tZero zero one one
sSave

10
Controls in detail
Telephone*
Sample dialog:
i You can also dial the telephone number spo-
ken by doing the following (instead of using the
command “Dial”):
앫Briefly pull operating lever
or
앫Press button s on the multifunction
steering wheel
You can dial the telephone number before all
numbers are recited in full.
“Confirm”
Using the command “Confirm” will repeat
all digits spoken up to that point. Upon re-
peating the digits, the system will prompt
you to continue your input.
Sample dialog:
“Correct”
Using the command “Correct” will correct
the last entered digit block. After speaking
the command, the last digit block is delet-
ed and all previously entered digits are re-
peated. The system then prompts you to
continue your input.
Sample dialog:
sDial number
tThe number, please
sZero one three zero
tZero one three zero
sFive zero zero five
tFive zero zero five
sDial
tCalling
sDial number
tThe number, please
sZero one three zero
tZero one three zero
sConfirm
tZero one three zero, go ahead
sFive zero zero five
tFive zero zero five
sDial
tCalling
sDial number
tThe number, please
sZero one three zero
tZero one three zero
sFive zero zero five
tFive zero nine five
sCorrect
tZero one three zero, go ahead
sFive zero zero five
tFive zero zero five
sDial
tCalling

11
Controls in detail
Telephone*
“Delete”
Using the command “Delete” will erase all
digits entered. The system then prompts
you to start your input again.
Sample dialog:
“Redial”
Use the command “Redial” to dial the last
dialed number.
Managing an automated answering
system/voice mail box
Activate the Voice Control System to ac-
cess and manage your answering ma-
chine/voice mail box.
왘Activate the Voice Control System dur-
ing a phone call (컄page 6).
An audible tone (beep) confirms the ac-
tivation of the system.
왘Speak the required digits (“Zero” to
“Nine”).
or
왘Speak the required words “Star” and
“Pound”.
왘Speak the final command “Dial”.
The system dials the number entered.
i You can also dial the telephone number spo-
ken by doing the following (instead of using the
command “Dial”):
앫Briefly pull operating lever
or
앫Press button son the multifunction
steering wheel
You can dial the telephone number before all
numbers are recited in full.
sDial number
tThe number, please
sZero one three zero
tZero one three zero
sFive zero zero five
tFive zero zero five
sDelete
tThe number is removed, go ahead
sFour two seven three
tFour two seven three
sThree nine one
tThree nine one
sDial
tCalling

12
Controls in detail
Telephone*
The Voice Control phone book:
앫gives you the capability to save phone
numbers and associate a name with a
phone number in the phone book
앫contains all entries
앫of the internal memory of the mo-
bile phone (TDMA, CDMA and GSM
mobile phone), entries are marked
with symbols
앫of the SIM card (GSM mobile
phone)
You can save up to 80 speaker-dependent
voice entries in the Voice Control phone
book.
Using these voice entries, you can dial a
phone number saved in the phone book.
“Save name” (Phone book)
Use the command “Save name” to create a
new entry in your phone book. After using
the command, the system will prompt you
to enter a phone number.
Digits from “Zero” to “Nine” can be en-
tered (컄page 9).
Speak the telephone number
앫as a continuous string
or, with longer phone numbers (more than
five digits),
앫in form of digit blocks (three to five dig-
its). After each digit block (separate the
digit blocks by using an approximately
0.5 second pause), the Voice Control
System repeats the recognized digits
and waits until you continue speaking.
After the command “Save”, you will be
prompted up to four times to input the
name.
i The Voice Control System may recognize
names even if not saved in your voice. For opti-
mum call-up performance, however, you yourself
should speak and save the names you intend to
use.
Sample dialog:
Phone book operation
Warning! G
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the phone book functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
Phone book commands
sSave name
tThe number, please
sZero one three zero
tZero one three zero
sFive zero zero five
tFive zero zero five
sSave
tThe name, please
sService Mercedes-Benz
tAgain
sService Mercedes-Benz
tName and number are set

13
Controls in detail
Telephone*
“Dial name” (Phone book)
Use the command “Dial name” to place a
phone call by selecting a name previously
saved in your personal phone book.
Sample dialog:
“Call <voice entry>” (Phone book)
Use the command “Call <voice entry>” to
place a phone call by directly selecting a
name previously saved in your personal
phone book. Each phone book entry is as-
sociated with one phone number.
Sample dialog:
“Delete name” (Phone book)
Use the command “Delete name” to delete
a name from your personal phone book.
Sample dialog:
“List phone book” and dialing a phone
number
Use the command “List phone book” to lis-
ten to the entire phone book or select an
entry and dial that number.
Sample dialog:
The system reads out the complete phone
book entry by entry.
Selecting an entry and dialing that num-
ber
왘Briefly pull operating lever.
or
왘Press button son the multifunction
steering wheel.
The system reads out the name of the
selected entry and dials the corre-
sponding number.
sDial name
tThe name, please
sSmith office
tCalling Smith office
sCall Smith office
tCalling Smith office
sDelete name
tThe name, please
sSmith office
tSmith office: Would you like to
delete the voice name?
sYes
tThe voice name is deleted
sList phone book

14
Controls in detail
Telephone*
“Delete phone book”
Use the command “Delete phone book” to
delete the complete phone book or one or
more voice entries from the phone book.
Sample dialog:
or
When the system reads the voice entry to
be deleted:
왘Briefly pull operating lever.
The voice entry to be deleted is select-
ed. The name of the selected voice en-
try is read out once more.
or
or
or
Canceling the dialog
왘Briefly pull operating lever.
sDelete phone book
tWould you like to delete all voice
names?
sYes
tAre you sure?
sYes
tThe phone voice names have
been deleted
The system deletes the complete
phone book. The deletion of the
phone book cannot be undone.
sNo
The system starts reading the
phone book.
tSmith office: Would you like to
delete the voice name?
sYes
tThe voice name is deleted
The voice entry is erased and the
remaining phone book entries are
read out.
sNo
The system continues reading the
phone book list entry by entry.
sBack
The system announces the pre-
ceding voice name. You may now
continue with the dialog.
sCancel
The dialog is concluded. The sys-
tem confirms “Cancel”.

15
Controls in detail
Telephone*
Copying cell phone book entry to Voice
Control phone book and adding voice
entry
왘In telephone mode, press soft key
“Phone book” on the COMAND. This
displays the list of phone book entries
saved on your cell phone.
왘Press soft key “sNew” to assign a
name to a phone number copied from
the phone book of your cell phone.
The cell phone entry is copied to the
Voice Control System and remains
available even if you change cell
phones.
The Voice Control System prompts you
to enter the name twice.
Sample dialog:
Playing voice entry
If you wish to hear the voice entry:
왘In telephone mode, press soft key
“sPlay” on the COMAND.
Deleting voice entry
If you wish to delete the voice entry:
왘In telephone mode, press soft key
“Delete” on the COMAND.
tThe name, please
sSmith office
tAgain
sSmith office
tThe name is set
tWould you like to delete the voice
name?
sYes
tThe voice name is deleted

16
Controls in detail
Radio
The Voice Control System gives you the ca-
pability to:
앫Select a station
앫Seek a station
앫Select a specific frequency
앫Scan stations
앫Save up to 15 stations in your station
list
앫Select frequency band (FM or AM)
앫Select weatherband
앫Delete station (from station list)
앫List the station list
앫Delete the station list
To operate the radio using the Voice Con-
trol System, the Voice Control System
must be activated (컄page 6).
Selecting radio mode:
왘Briefly pull operating lever.
왘Speak the command “Radio”.
왘Briefly pull operating lever.
왘Speak one of the radio commands.
For a complete list of commands
(컄page 22).
“Help Radio”
The Voice Control System reads out an op-
tion list of available commands that can be
used.
Selecting frequency band (FM, AM) or
weatherband
Use the commands
앫“FM”
앫“AM”
앫“Weatherband”
to select the desired frequency band or
switch the radio to the weatherband.
Warning! G
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
Radio operation
Radio commands

17
Controls in detail
Radio
“Seek”
Use the command
앫“Seek”
for the Voice Control System to activate
the seek function and tune the radio to the
next available station.
Selecting frequency (FM, AM only)
You may, for example, select a frequency
in the FM band (87.9 to 107.9 Megahertz)
directly using a verbal command such as
“Ninety-five five”. The Voice Control Sys-
tem also recognizes the words “frequen-
cy”, “point” and “megahertz”. You may for
example use the command “Frequency
ninety-five point five”.
Sample dialog:
The Voice Control System tunes the radio
to frequency FM 95.5.
“Scan”
Use the command “Scan” (AM and FM
only) to scan the available radio stations.
Each available radio station will be played
for ten seconds.
To cancel “Scan”:
왘Briefly push operating lever.
The station scan is cancelled.
“Save station” (List saved stations)
Use this command to save the set station
(AM and FM only) by name in your personal
station list. After using this command, the
Voice Control System will prompt you to
repeat the name two to four times before it
is saved in the station list.
i The Voice Control System may recognize
names even if not saved in your voice. For opti-
mum performance, however, call up only names
you have saved yourself.
i You can freely select the station name, for
example “Favorite station”.
Sample dialog:
“Select station” (List saved stations)
Use the command “Select station” (AM
and FM only) to select a saved station
name from your station list.
Sample dialog:
The radio tunes to the corresponding fre-
quency.
sNinety-five point five megahertz
sSave station
tStation, please
sSmooth Jazz
tAgain
sSmooth Jazz
tThe station is set
sSelect station
tStation, please
sSmooth Jazz
tSmooth Jazz

18
Controls in detail
Radio
“Station Smooth Jazz” (List saved sta-
tions)
Use this command (AM and FM only) to di-
rectly select a saved station name from
your station list.
Sample dialog:
The radio tunes to the corresponding fre-
quency.
i If the Voice Control System does not recog-
nize the station name you requested, please re-
fer to the section “List saved stations”
(컄page 18). By following the dialog, you can
check and determine if the name is saved in the
station list.
“List saved stations” and select station
from list
Use this command to list the entire station
list, or to select an entry from the station
list.
Sample dialog:
The Voice Control System reads out the
entire list.
To select a station:
When the system reads the desired sta-
tion:
왘Briefly pull operating lever.
The system reads out the selected sta-
tion once more and then tunes the ra-
dio to the corresponding frequency.
To cancel the dialog:
왘Briefly push operating lever.
The dialog is concluded. The system
confirms “Cancel”.
“Delete station” (List saved stations)
Use the command “Delete station” (AM
and FM only) to delete a station from your
personal station list.
Sample dialog:
sStation Smooth Jazz
tSmooth Jazz
sList saved stations
sDelete station
tStation, please
sSmooth Jazz
tWould you like to delete Smooth
Jazz?
sYes
tThe station is deleted