Mercury TSL01 User manual

Item ref: 600.106UK
TSL01
DIGITAL MULTITESTER
User Manual

TSL01 User Manual
Please read this manual thoroughly and
ensure all contents are fully understood
before using the apparatus.
This device is designed to measure the sound level in the environment and
Complies with EN61326-1:2013 standard. It is suitable for monitoring
background noise to ensure health and safety standards and safety
requirements are met.
Layout:
1. Condenser Mic
2. LCD display
3. On/Off switch
4. Level range setting
control
5. Max value hold switch
6. Sensitivity weight
setting
7. Time weight setting
8. A/C output
9. D/C output
10. 6Vdc power input
11. Tripod mount
12. Calibration control

TSL01 User Manual
LCD Screen Display:
1. Under; Indicates current sound level is below selected range.
2. Selected sound level range; Press level button to choose 30-
80dB, 50-100dB, 60-110dB, 80-130dB or 30-130dB.
3. Low battery indicator; Please replace the batteries before use.
4. Max value hold display; Toggle on/off by pressing max button,
when function is on it will display only the highest recorded value
since the function was activated.
5. Fast time weighting; Sampling at 125ms interval.
6. Slow time weighting; Sampling at 1sec interval.
7. Sound measurement reading.
8. Over; Indicates current sound level is above selected range.
9. Live barograph display.
10. Sensitivity setting display; Change by pressing A/C button. A is
more sensitive to general noise, C is more sensitive to low
frequency noise.
11. Measurement unit dB.

TSL01 User Manual
Operation:
This unit is not suitable for use above 2000m sea level. Humidity in the
testing environment should be less than 80%RH temperature 0-40°C.
-Switch on the unit.
-Select desired range ideally UNDER and OVER should not be
displayed.
-Select sensitivity weight, for general noise use A, for low
frequency noise use C.
-For measuring short burst noise set the time weight to fast, for
normal background noise use slow.
-For monitoring peak noise level, press the Max button, only the
highest on record will be displayed.
Calibration:
All units are calibrated from the factory however we recommend the device
is recalibrated at least once a year. To calibrate, insert the mic into the
acoustic calibrator. Set the Sensitivity weight to A, time weight to fast and
range to 60-110dB. After the calibrator is on, use a fine flat bladed
screwdriver to adjust the potentiometer on top of the battery compartment
until 94dB is displayed.
Accessories:
•Instruction manual
•Heavy duty protective case
•4 x AA batteries
•1 x Foam windshield

TSL01 User Manual
Specification:
Range –30-130dBA, 35-135dBC
Accuracy –+/-1.5dB (under reference condition)
Frequency Range –31.5Hz –8.5kHz
Level Range –30-80, 50-100, 60-110, 80-130, 30-130dB
Linearity Range –50dB/100dB
Frequency Weight –A/C
Resolution –0.1dB, 4 digits display
Time Weight –Fast/Slow 0.5s/1s sampling rate
Microphone –½” Electret Condenser Mic
Power –4 x AA Battery or 6V dc PSU
Battery Life –30 hours (using alkaline AA batteries)
Operation condition –0-40°C, 70-80%RH
Storage condition –-10-60°, 10-80%RH
Weight –308g (including batteries)
Dimension –256 x 70 x 35mm
This product is classed as Electrical or Electronic equipment
and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed
of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2018. AVSL Group Ltd.