METHVEN Kiri HOT 01-5795 User manual

Wall Top Assembly
HOT 01-5795
COLD 01-5788
Installation Guide
Illustration may not reflect actual product shape.
www.methven.com
Kiri
Use of this product in non-domestic applications voids warranty.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
Do not remove the ceramic cartridge from the mixer when installing.
Damage caused by hydrostatic testing is not covered by our warranty.
IMPORTANT
Please read all of the instructions before installation

Technical Specifications
SPARE PARTS
AUG 2010 MA015801
THE METHVEN GUARANTEE
The warranty statement shall apply to all tapware & showers supplied by Methven
For more information visit www.methven.com
THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia
We recommend that this product is installed by a licensed plumber.
Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
Inlet Connections: All 1/2’ BSP
Operating Pressure: 150kPa - 500kPa
Operating Temperatures: Recommended hot water supply 50°C,
maximum 70°C. AS 3500 requires all hot
water supplies to any sanitary fitting to be
tempered to 50°C.
Recommended Rough in Set up: Face of finished wall to front of breech
(body) 8mm
Tolerance : Min: 4mm Max: 12mm
Standard Spindle &
Handle Assembly Set up
Flange Male Adaptor
04-9905
Spindle Only
Hot 04-9752
Cold 04-9769
Extended Spindles (Not Included)
Hot 04-9707
Cold 04-9714
Flange Male Adaptor 04-9899
Standard Spindle
12mm Extension
04-9837
(Not Included)
Grub screws
Handle
Flange Locking Nut
Flange
Flange 0-rings
Spindle
Spindle Flange M & F
Extension 04-9875
(Not Included)
Spindle as assembled
Blue washer = COLD
Red washer = HOT
STANDARD WALL-TOP ASSEMBLY
Adjustment For Handle Line Up.
The spindle can be tightened allowing
the handle to be adjusted on the spline.