Metos FUTURA RP2 User manual

Installation and Operation Manual
Rev.5.1
RANGE
FUTURA
RP2, RP4, RP6
MG-product codes
3494319, 3494358, 3494397, 3521114, 3521115, 3521121, 3521153, 3521178, 3521386, 3521393, 3521467,
3572214, 3572221, 3755004, 3755005

Table of Contents
1. General .......................................................................................................................................................3
1.1. Symbols used in the manual .......................................................................................................................3
1.2. Symbols used on the appliance...................................................................................................................3
1.3. Checking the relationship of the appliance and the manual ........................................................................3
2. Safety .........................................................................................................................................................4
2.1. Safe use of the appliance ............................................................................................................................4
2.2. 2.2 Disposal of the appliance ......................................................................................................................4
3. Functional description ..............................................................................................................................5
3.1. Intended use of the appliance.....................................................................................................................5
3.1.1. Prohibited use .............................................................................................................................................5
3.2. Operating principle and construction...........................................................................................................5
4. Operation instructions ..............................................................................................................................6
4.1. Before use...................................................................................................................................................6
4.1.1. Selecting cookware .....................................................................................................................................6
4.2. Operation procedures..................................................................................................................................6
4.2.1. Using the range...........................................................................................................................................6
4.3. After use......................................................................................................................................................7
4.3.1. Cleaning.......................................................................................................................................................7
4.3.2. Other service measures..............................................................................................................................8
5. Installation .................................................................................................................................................9
5.1. General ........................................................................................................................................................9
5.2. Transporting and unpacking the range.........................................................................................................9
5.3. Positioning the range...................................................................................................................................9
5.4. Electrical connections..................................................................................................................................9
5.5. Test-run...................................................................................................................................................... 10
6. Troubleshooting....................................................................................................................................... 11
7. Technical specifications ..........................................................................................................................12

12.08.2014
METOS FUTURA Range Rev. 5.0
3
1. General
Carefully read the instructions in this manual as they contain important information regarding
proper, efficient and safe installation, use and maintenance of the appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the manufacturer’s
instructions and following local regulations. The connection of the appliance to the
electric and water supply must be carried out by qualified persons only.
Persons using this appliance should be specifically trained in its operation.
Switch off the appliance in case of failure or malfunction. The periodical function checks
requested in the manual must be carried out according to the instructions. Have the appliance
serviced by a technically qualified person authorized by the manufacturer and using
original spare parts.
Not complying with the above may put the safety of the appliance in danger.
1.1. Symbols used in the manual
This symbol informs about a situation where a safety risk might be at hand. Given instructions
are mandatory in order to prevent injury.
This symbol informs about the right way to perform in order to prevent bad results, appliance
damage or hazardous situations.
This symbol informs about recommendations and hints that help to get the best performance
out of the appliance.
1.2. Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The removal of
the part must be carried out by qualified persons only.
1.3. Checking the relationship of the appliance and the manual
The rating plate of the appliance indicates the serial number of the appliance. If the manuals
are missing, it is possible to order new ones from the manufacturer or the local representative.
When ordering new manuals it is essential to quote the serial number shown on the rating plate.
STOP

12.08.2014 METOS FUTURA Range Rev.5.0
4
2. Safety
2.1. Safe use of the appliance
Because the range is a heated appliance that has hot surfaces during normal use, the following
warnings and instructions must be followed in order to avoid burns.
During long-time operation even the frame surrounding the cooking plates gets hot.
The capability of the cooking plates to store and even out the heat also keeps them hot for
a long time after switching them off.
For safe handling of cookware on the cooking top, always use heat protective gloves.
Do not leave the range on for long periods totally without supervision.
2.2. 2.2 Disposal of the appliance
The destroying of the appliance when its economical lifetime has been reached may be
harmful to the environment if not properly handled. Utilization of materials that are reusable
is best done by professional personnel specialized in recycling

12.08.2014
METOS FUTURA Range Rev. 5.0
5
3. Functional description
3.1. Intended use of the appliance
The Futura range is intended for preparing different kinds of foodstuffs using cookware.
3.1.1. Prohibited use
Use of the appliance for other purposes than stated above is prohibited.
Preparing food directly on the cooking plate without cookware is prohibited.
Covering the gaps between the range cooking plates and the upper frame with folio is prohibited.
The manufacturer of the appliance takes no responsibility for situations that might occur if
the warnings and instructions in this manual are neglected.
3.2. Operating principle and construction
Depending on the model, the range is equipped with two, four or six cooking plates.
Each cooking plate is equipped with a 7-position power regulator which allows power
regulation in several steps. A green pilot light for every cooking plate indicates that the
plate is on.
In order to ease daily cleaning the cooking plates are hinged and can be swinged up in an
upright position. In addition, the range is equipped with a removable spillage tray.
STOP

12.08.2014 METOS FUTURA Range Rev.5.0
6
4. Operation instructions
4.1. Before use
The cooking plates of the range are protected with a thin layer of oil for the duration of
storage and transportation. When heating up the range for the first time the oil may create
some smoke and unpleasant smell. This is quite normal and disappears quickly when using
the range.
4.1.1. Selecting cookware
Always use flat-based cookware in order to achieve good heat transfer and to increase the
service life of the cooking plate. Placing a cold and wet pan on a red-hot cooking plate
should be avoided as the thermal tensions created considerably decrease the service life
of the plate.
You get the best benefit from the range as well as from the cookware by observing the
following:
• Use good quality flat-based cookware.
• Wait for pans to cool before putting them in cold water.
• Always ensure pans have clean, dry bases before use.
• Ensure pan handles are positioned safely and away from heat sources.
• Always use pan lids except when frying.
• Remember good quality pans retain heat well, so generally only low or medium
heat is necessary.
4.2. Operation procedures
4.2.1. Using the range
Switch the appliance off if it is damaged or is malfunctioning. Contact authorised service
personnel using original spare parts for service of the appliance.
Ranges intended for use aboard ships are equipped with a potrack. Using a range aboard
a ship without the potrack is prohibited.
During the installation, a mains switch may have been fitted near the range, often on a wall
nearby. Check that the mains switch is in the ON position.
The range is controlled with power regulators and pilot lights.

12.08.2014
METOS FUTURA Range Rev. 5.0
7
Each cooking plate is equipped with a 7-position power regulator which allows powerregulation in several
steps. A green pilot light for every cooking plate indicates that the plate is on.
Cooking is started by turning the power regulator to position 6. When boiling starts, the power is
decreased as needed. Usually it is possible to use a small or medium power setting.
Do not leave the cooking plate on without any load, because it then overheats, which considerably dec-
reases the service life of the plate. By turning the cooking plate off when not needed, energy is saved
and a cooler working environment is achieved.
If there are longer interruptions in the electricity distribution, all power regulators of therange should be
set to the 0 position. This should be done in order to prevent unexpectedstart-up of the range when the
electricity distribution is restored.
4.3. After use
4.3.1. Cleaning
Use of a water hose or pressure cleaning jet is strictly forbidden.
It is not allowed to wipe the undersides of cooking plates swung up to a cleaning position with a wet
sponge, cloth etc., because water flowing down the plate is absorbed into the insulating material thus
causing earth leakage.
When cleaning the cooking plates, observe that they are hot a long time after they have
been switched off. When the cooking plates are swinged up for cleaning, it is advisable to
support the plate in the upper position with one hand thus preventing the possibility that
they unexpectedly return to their working position.
Be careful when removing the spillage tray, as it may contain spillages that are still hot.
Cleaning is very easy, if possible spillovers are removed immediately with a damp cloth.
Sugar and mixes containing much sugar must be removed immediately, because later removing
is laborious.
STOP
STOP
Operating panel
1. Spillage tray
2. Pilot light cooking plate
3. Power regulator front panel
4. Power regulator, rear panel

12.08.2014 METOS FUTURA Range Rev.5.0
8
In all cleaning, prefer chemical cleaning methods rather than mechanical rubbing. Use a slightly alkaline
detergent (pH 8-10) diluted in water according to instructions when cleaning the surfaces of the range.
Always dry the cooking plates after cleaning by heating them up.
Clean cooking plates give an efficient heat transfer to the cookware. Cooking is then fast
and the service life of the cooking plates is extended.
The spillage tray is pulled out and cleaned. Outer surfaces are wiped off with a damp cloth
and then wiped dry.
4.3.2. Other service measures
The appliance does not include any user serviceable parts inside. Service must be left to
authorised service personnel.
STOP

12.08.2014
METOS FUTURA Range Rev. 5.0
9
5. Installation
5.1. General
The installation of this appliance must be carried out in accordance with the manufacturer’s
instructions and following local regulations. This installation manual must be used together
with the installation drawing of the appliance.
The connection of the appliance to the electrical and water supply must be carried out by
qualified persons only.
5.2. Transporting and unpacking the range
The best way to move the range is to keep it in its package as long as possible while it also
protects the range from outer damage. If it is necessary to unpack the range, possible lifting
must be done from the bottom frame using suitable spacers of wood. In order to avoid
damages it is not allowed to use the cooking top as a workbench during installation.
5.3. Positioning the range
Because the temperature of a cooking plate accidentally forgotten on without a pan may
reach even 550°C, it is mandatory to follow local fire safety regulations when installing
the range.
The range is positioned in the installation place and adjusted in a horizontal position from
the adjustable legs.
When the range is on the correct location and in a horizontal position, it must be bolted to
the floor, the land models by the flanges in the rear adjusting legs and the marine models
from all four leg flanges.
5.4. Electrical connections
Besides the live electrical parts, also look out for possible moving mechanisms inside the
appliance, if there is a need for testing during installation and the guards or cover plates
are detached.
In order to make eventual future service easier and increase safety, a mains switch must
be installed near the appliance. This switch must disconnect the appliance completely
from the electrical supply network.
STOP
STOP

12.08.2014 METOS FUTURA Range Rev.5.0
10
5.5. Test-run
Acquaint yourself with the user manual of this appliance before testing it. The appliances under the
cooking top are provided with their own manuals.
After connecting the cable check the function of the range.
Check that
• every cooking plate heats up and the corresponding pilot light turns on when theplate is switched on
with the power regulator
• no wires inside the appliance get jammed before refitting the outer panels.
Refit the outer panels.

12.08.2014
METOS FUTURA Range Rev. 5.0
11
6. Troubleshooting
If the appliance does not function, check the following
• Has the appliance been used according to the instructions?
• Are all possibly removable parts refitted?
• Is the mains switch on the appliance or nearby - often on the wall - in the ON position?
• Are the circuit breakers (fuses) of the appliance in the electricity distribution boardin working order?
Ask an authorised person to check the circuit breakers.
If even this does not help, figure out in advance how to briefly describe the breakdownand contact an
authorised service person.

12.08.2014 METOS FUTURA Range Rev.5.0
12
7. Technical specifications
Wiring diagram 81848-83C
Wiring diagram 81849C83
Main and control circuit T03431 A3
Main and control circuit T03519 A3
Main and control circuit S00092 A4
Installation drawing T02237 A3
Installation drawing T02238 A3
Installation drawing T02239 A3
Installation drawing T02240 A3
Installation drawing T02241 A3
Installation drawing T02242 A3