MicroBoards Technology DVD Premium Pro Series User manual

DSR DVD Premium Pro Series
Rack Mount
Users Guide
www.microboards.com Version 1.0

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
2
TABLE OF CONTENTS
System Overview................................................................................................................ 3
Unpacking your system....................................................................................................... 3
Installation Requirements ................................................................................................... 4
Menu Overview .................................................................................................................. 5
Setup Menu......................................................................................................................... 7
Copy DVD to DVD ............................................................................................................ 8
Simulation DVD to DVD.................................................................................................... 8
Registering Data to the Hard Drive (HDD)........................................................................ 9
Erasing DVD-+RW media................................................................................................ 10
Copy Hard Drive (HDD) to DVD..................................................................................... 10
Clearing the Hard Drive (HDD) ....................................................................................... 11
Copy CD to CD................................................................................................................. 13
Simulation CD to CD........................................................................................................ 13
Registering Data to the Hard Drive (HDD)...................................................................... 14
Erasing CD-RW media..................................................................................................... 15
Copy Hard Drive (HDD) to CD........................................................................................ 15
Clearing the Hard Drive (HDD) ....................................................................................... 16
Track Extraction................................................................................................................ 17
Error status in Track Extraction:................................................................................... 18
Setup Menu....................................................................................................................... 19
Mode Select: ................................................................................................................. 19
Copy DISC TO HD/DISC: ........................................................................................... 19
DVD WR Speed:........................................................................................................... 19
CD WR Speed:.............................................................................................................. 19
ISRC Check: ................................................................................................................. 19
Copy Quantity:.............................................................................................................. 19
Session Mode:............................................................................................................... 20
Drive Inquiry................................................................................................................. 20
F/W Version.................................................................................................................. 20
Error Codes....................................................................................................................... 21
Specifications:................................................................................................................... 28
Supported Formats:........................................................................................................... 28
Firmware Updates............................................................................................................. 28
Contact Information.......................................................................................................... 28

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
3
System Overview
The DVD market has grown at an incredible pace and Microboards Technology has
developed a duplicator with leading-edge technology to meet the growing market
requirements. The DSR DVD Premium Pro Series is the first stand-alone, multi-drive
DVD-+R/CD-R duplicator employing the use of General Purpose DVD-+R recorders.
Configurations of 1 to 4 recorders are available to meet individual production
requirements. An intuitive, menu driven display and 2-button control interface provide
simple one-touch operation for the novice user while giving access to advanced features
for the professional. The hard drive comes standard with the system and allows for
DVD/CD image archival and CD track extraction for CD audio compilations.
Advanced Features:
•Stand-Alone DVD-R / CD-R duplicator
•One Touch duplication
•Speed selectable (1x to 16x for DVD-+R and 4x to 48x for CD-R)
•Supports writing to DVD-+R/RW, DVD+R DL, CD-R/RW
•Copy and Verify
•Counter feature allows the user to input how many discs need to be
copied and the keeps track of the total discs completed.
•Automatically detects DVD or CD masters
•Simulation mode to ensure recording stability
•Easy-to-read, two-line display for status and error reporting
•Updates easily installed through DVD/CD reader
Unpacking your system
When unpacking your duplicator, confirm the following items are included:
•DSR DVD Rack Mount duplicator
•Power cable
•Quick Start Guide
•Microboards Documentation CD
If any of these items are missing, please contact or Microboards Technology Technical
Support at 952-556-1639.
IMPORTANT: Please keep all the packing for your DSR DVD Rack Mount duplicator. If
your unit ever needs to be sent in for service, it must be returned in the original packing
or the warranty will be voided.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
4
Installation Requirements
System Setup
•Connect the power cable to the DSR DVD Rack Mount duplicator and plug in to a protected
power outlet strip or UPS power supply.
•Turn on power to the tower. The system is now ready to use.
Install your DSR DVD Rack Mount duplicator in the following environment:
•On a level and stable surface
•In a well ventilated location
•Temperature and humidity
•Temperature: 5-40°
•Humidity: 20-80%RH (no dew formation)
Do not install it in the following places:
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked
by a curtain or blind.)
A dusty location
A place where there is a lot of vibration
Near open flame
A place where the temperature and humidity change drastically
Near a heating device such as a heater or furnace
A location where air from an air conditioner blows directly onto the unit
Near a container filled with water such as a vase
In winter during times of low humidity or in a location where static electricity is
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.
Power supply
Use house current as the power source for the unit.
Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying
machine).
Use an outlet with stable power supply voltages.
Do not overload an outlet. Do not use a service outlet from a PCs or other office
machine.
Wire the power cord properly.
Do not touch the power cord with a wet hand.
Be careful not to damage the power cord.
Inspect the power cord periodically.
In the event that the power cord is damaged, replace the power cord.
Be sure to use a tool such as the screwdriver to change the 115/230V Switch.
Do not use your finger.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
5
Menu Overview
YES
(DISCtoDISC)
MASTER SELECT?
(DISCtoDISC)
>READER?
YES
(DISCtoHDD/DISC)
>HDD2?
NO
NO
YES
>EXIT?
NO
REGIST 15:26
CD-DA 20%
NO
COPY 15:26
CD-DA 20%
MASTER DISC
INSERT
TARGET DISC
INSERT ANALYZING MASTER
(DISCtoDISC)
COPY START?
(DISCtoDISC)
COPY CD+G START?
NO YES COPY 15:26
MASTER DISC
INSERT
TARGET DISC
INSERT ANALYZING MASTER
CD+G 20%
NO
(DISCtoDISC)
SIMULATION?
(REWRITABLE)
DISC ERASE?
(DISCtoHDD1)
Trk EXTRACTION?
(MODE CHANGE)
SETUP?
MASTER DISC
INSERT ANALYZING MASTER
SURE ? DISC ERASE
TRK 01/12
EXTRACT THE Trk?
COPY TO HDD OK? NEXT MASTER
REGIST 15:26
CD-DA 20%
(HDD1toDISC)
COPY START COPY MENU
SETUP MENU
MASTER DISC
INSERT
YES
YES
YES
YES
YES
NO
EXTRACTION OK?
TRK 12/12
EXTRACT THE Trk?
END EXTRACTION?
YES
NO
YES or NO
YES or NO
NO
YES
NO
NO
NO
NO/ESC
ESC
ESC
ESC
ESC
NO
YES
NO = skip track
YES = execute the selected track
YES
SIMULATION 15:26
CD-DA 20%
TARGET DISC
INSERT ANALYZING MASTER
(HDDtoDISC)
>HDD1? CD-DA
NO
(HDDtoDISC)
>HDD1? 15:26
(HDD1toDISC)
COPY START? COPY 15:26
CD-DA 20%
TARGET DISC
INSERT
(HDD2toDISC)
COPY START? COPY 15:26
CD-DA 20%
TARGET DISC
INSERT
(HDDtoDISC)
>HDD9? CD-DA
NO
(HDDtoDISC)
>HHD9? 15:26
(HDD9toDISC)
COPY START? COPY 15:26
CD-DA 20%
TARGET DISC
INSERT
>MASTER CLEAR? YES >>HDD1 CLEAR?
NO
>>HDD9 CLEAR?
NO
YES
NO
YES
>>EXIT?
(HDDtoDISC)
>HDD9?
(HDDtoDISC)
>HDD1?
SURE ? DISC ERASE
YES
>QUICK ERASE?
>QUICK ERASE?
NO
NO
>EXIT?
NO
Please wait...
Please wait...
YES
YES

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
6
Important Notes:
* There are 10 hard drive partitions available for storing DVD and/or CD masters.
* The Master Clear? menu item will only appear if information has been stored on the internal
hard drive.
* Track Extraction only applies to CD-DA audio master discs. The Track Extraction feature
copies the audio tracks to HDD1. This cannot be changed to a different hard drive partition.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
7
Setup Menu

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
8
Copy DVD to DVD
1. Place the Master Disc into the Reader drive
2. Place the blank DVD-+R(/W) disc(s) into the Recorder drive(s)
3. The display reads COPY START? (DISC to DISC)
Copy Start?
(DISC to DISC)
4. Press Yes
5. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
6. The display will now show the progress of the Copy Job
COPY 4.0GB
DVD 15%
7. The Recorder(s) will eject the DVD recordable discs when the job is complete.
Simulation DVD to DVD
Important: Simulation is not allowed when using DVD+R/RW media.
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows SIMULATION? (DISC to DISC)
Simulation?
(DISC to DISC)
2. Place the Master Disc into the Reader drive
3. Place the blank DVD-R(/W) disc(s) into the Recorder drive(s) and wait 10
seconds for the light(s) on the front of the Recorder(s) to stop blinking.
4. Press Yes
5. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
6. The display will now show the progress of the Simulation Copy Job
SIMULATION 4.0GB
DVD 15%
7. The Recorder(s) will eject the DVD-R discs when the job is complete.
Note: The DVD-R media will NOT be recorded to in Simulation Mode.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
9
Registering Data to the Hard Drive (HDD)
When registering data to a partition on the internal hard drive, you do have the option
of recording to the blank media as well. In the SETUP menu, go to “Copy DISC to
HD/DISC” and change the setting from OFF to ON. This will allow the data from
the master disc to be copied to the internal hard drive, as well as any blank discs you
have in the recorders. See page 19 for a description of the SETUP menu.
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT?
(DISC to DISC)
2. Place the Master disc into the Reader drive.
3. Press the Yes key
4. The display will show:
>READER?
(DISC TO DISC)
5. Press the No key
6. The display will now show:
>HDD1?
(DISC TO HDD)
7. If you wish to copy the data to the 1st partition, press the Yes key.
8. If you wish to select another partition, press the NO key.
>HDD2?
(DISC to HDD)
9. By continuing to press the NO key, you will scroll through the different HDD
partitions. Once you are at the partition you wish to use, press the YES key.
10. The display will now show the progress of the data being transferred to the hard
drive:
REGIST 4.0GB
DVD 15%
11. Once the Master disc has been copied to the HDD, the Reader drive will eject the
disc. When you go back into the MASTER SELECT? Menu, and select a
partition with data stored on it, the display will show the type of data (ROM or
Video) and the capacity of that data. Proceed to COPY HDD TO DVD section.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
10
Erasing DVD-+RW media
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows DISC ERASE? (REWRITABLE):
DISC ERASE?
(REWRITABLE)
2. Load the Recorder(s) with the DVD-+RW media you wish to erase. You can
erase one disc at a time or fill all the Recorders to erase multiple discs at once.
3. Press the Yes key
4. The next screen asks if you want to perform a Quick Erase.
QUICK ERASE?
If you wish to perform a Full Erase, press the NO key.
FULL ERASE?
Pressing the YES key at either of these selections will show the following screen:
SURE?
5. Press the Yes key if you are sure you want to erase the DVD-+RW disc. If you
do not wish to erase the disc, press the No key and you will go back to the DISC
ERASE screen (step 1).
6. The screen will now show:
DISC ERASE……
7. Once the erasing is complete, the Recorder(s) will eject the disc(s).
Copy Hard Drive (HDD) to DVD
1. Follow the instructions on page 9 to register the Master DVD to the HDD.
2. Press to NO key until the screen displays
Master Select?
3. Press the YES key.
4. The display will show READER.
5. Press the NO key and the display will show HDD1. If this is the hard drive
partition you wish to copy, press the YES key.
6. The screen will display COPY START? (HDD1 to DISC)

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
11
COPY START?
(HDD1 to DISC)
7. If you wish to select a different hard drive partition, press the NO key in step 5,
unit the display shows the partition you wish to copy.
8. Place the blank DVD-+R disc(s) into the Recorder(s) and wait 10 seconds for the
light(s) on the front of the Recorder(s) to stop blinking.
9. Press the Yes button.
10. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
11. The display will now show the progress of the copy job from the HDD to the
Recorder(s):
COPY 4.0GB
DVD 15%
12. After the Copy job is complete, the DVD-+R disc(s) will be ejected from the
Recorder(s).
Clearing the Hard Drive (HDD)
The Master Clear option will not appear if there is no information stored on any of the
hard drive partitions.
1. At the COPY START? (HDD1 to DISC) menu, press the NO key until the display
shows MASTER SELECT? (HDD1 to DISC).
MASTER SELECT?
(HDD1 to DISC)
2. Press the Yes button.
3. The display will show:
>READER?
(DISC TO DISC)
4. Press the No button until you the screen displays MASTER CLEAR? (HDD):
>MASTER CLEAR?
(HDD)
5. Press the Yes button
6. You can now select which hard drive partition to erase. Pressing the NO button
will scroll you though the partition selections.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
12
7. Press the Yes button if you are sure you want to clear the HDD.
8. The hard drive will now be cleared and you will be asked if you want to register
another master to the HDD.
>HDD1?
(DISC TO HDD)
9. Press Yes and the Reader drive will eject and you can insert another master to
register to the HDD.
REGIST 4.0GB
DVD 15%
10. Press NO and you can exit this menu.
>EXIT?

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
13
Copy CD to CD
1. Place the Master Disc into the Reader drive
2. Place the blank CD-R(/W) disc(s) into the Recorder drive(s)
3. The display reads COPY START? (DISC to DISC)
Copy Start?
(DISC to DISC)
4. Press Yes
5. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
6. The display will now show the progress of the Copy Job
COPY 15:26
CD-DA 15%
7. The Recorder(s) will eject the CD-R discs when the job is complete.
Simulation CD to CD
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows SIMULATION? (DISC to DISC)
Simulation?
(DISC to DISC)
2. Place the Master Disc into the Reader drive
3. Place the blank CD-R(/W) disc(s) into the Recorder drive(s) and wait 10 seconds
for the light(s) on the front of the Recorder(s) to stop blinking.
4. Press Yes
5. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
6. The display will now show the progress of the Copy Job
SIMULATION 15:26
CD-DA 15%
7. The Recorder(s) will eject the CD-R discs when the job is complete.
Note: The CD-R media will NOT be recorded to in Simulation Mode.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
14
Registering Data to the Hard Drive (HDD)
When registering data to a partition on the internal hard drive, you do have the option
of recording to the blank media as well. In the SETUP menu, go to “Copy DISC to
HD/DISC” and change the setting from OFF to ON. This will allow the data from
the master disc to be copied to the internal hard drive, as well as any blank discs you
have in the recorders. See page 19 for a description of the SETUP menu.
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT?
(DISC to DISC)
2. Place the Master CD into the Reader drive.
3. Press the Yes key
4. The display will show:
>READER?
(DISC TO DISC)
5. Press the No key
6. The display will now show:
>HDD1?
(DISC TO HDD)
7. If you wish to copy the data to the 1st partition, press the Yes key.
8. If you wish to select another partition, press the NO key.
>HDD2?
(DISC to HDD)
9. By continuing to press the NO key, you will scroll through the different HDD
partitions. Once you are at the partition you wish to use, press the YES key.
10. The display will now show the progress of the data being transferred to the hard
drive:
REGIST 15:26
CD-DA 15%
11. Once the Master disc has been copied to the HDD, the Reader drive will eject the
disc. Proceed to COPY HDD TO CD section (page 15).

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
15
Erasing CD-RW media
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows DISC ERASE? (REWRITABLE):
DISC ERASE?
(REWRITABLE)
2. Load the Recorder(s) with the CD-RW media you wish to erase. You can erase
one disc at a time or fill all the Recorders to erase multiple discs at once.
3. Press the Yes key
4. The next screen asks if you want to perform a Quick Erase.
QUICK ERASE?
If you wish to perform a Full Erase, press the NO key.
FULL ERASE?
Pressing the YES key at either of these selections will show the following screen:
SURE?
5. Press the Yes key if you are sure you want to erase the CD-RW disc. If you do
not wish to erase the disc, press the No key and you will go back to the DISC
ERASE screen (step 1).
6. The screen will now show:
DISC ERASE……
Once the erasing is complete, the Recorder(s) will eject the disc(s).
Copy Hard Drive (HDD) to CD
1. Follow the instructions on page 14 to register the Master CD to the HDD.
2. Press to NO key until the screen displays
Master Select?
3. Press the YES key.
4. The display will show READER.
5. Press the NO key and the display will show HDD1. If this is the hard drive
partition you wish to copy, press the YES key.
6. The screen will display COPY START? (HDD1 to DISC)
COPY START?
(HDD1 to DISC)

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
16
7. If you wish to select a different hard drive partition, press the NO key in step 5,
unit the display shows the partition you wish to copy.
8. Place the blank CD-R disc(s) into the Recorder(s) and wait 10 seconds for the
light(s) on the front of the Recorder(s) to stop blinking.
9. Press the Yes button.
10. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
11. The display will now show the progress of the copy job from the HDD to the
Recorder(s):
COPY 600MB
CDROM 15%
After the Copy job is complete, the CD-R disc(s) will be ejected from the
Recorder(s).
Clearing the Hard Drive (HDD)
The Master Clear option will not appear if there is no information stored on any of the
hard drive partitions.
1. At the COPY START? (HDD1 to DISC) menu, press the NO key until the display
shows MASTER SELECT? (HDD1 to DISC).
MASTER SELECT?
(HDD to DISC)
2. Press the Yes button.
3. The display will show:
>READER?
(DISC TO DISC)
4. Press the No button until you the screen displays MASTER CLEAR? (HDD):
>MASTER CLEAR?
(HDD)
5. Press the Yes button
6. You can now select which hard drive partition to erase. Pressing the NO button
will scroll you though the partition selections.
7. Press the Yes button if you are sure you want to clear the HDD.
8. The hard drive will now be cleared and you will be asked if you want to register
another master to the HDD.
>HDD1?
(DISC TO HDD1)

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
17
9. Press Yes and the Reader drive will eject and you can insert another master to
register to the HDD.
REGIST 600MB
CDROM 15%
10. Press NO and you can exit this menu.
>EXIT?
Track Extraction
When extracting tracks to the internal hard drive, the DSR DVD Rack Mount duplicator
always uses the first CD partition. If there is information already stored on CD partition
1, the system will ask if you want to overwrite this information. This partition cannot be
changed from CD partition one.
1. At the COPY START? Menu, press the NO key until the display :
Press the “YES” button.
2. Press “YES” again in the following screen.
If any master data is already registered in HDD, the DSR DVD Rack Mount
duplicator asks you whether you want to overwrite data.
Press “YES” to overwrite, “NO” to cancel.
3. Insert a master audio disc into the reader drive. DSR DVD Standard Pro Series will
analyze the master disc.
4. After it completes analyzing the master disc, it displays Selected Track Number /
Total Track Number.
This master data has total 12 tracks.
Press “NO” to skip forward a track.
Press “YES” to select the track you want to extract.
Trk EXTRACTION?
(
CDtoHDD
)
EXTRACTION
OK?
INSERT
MASTER DISC ANALYZING
MASTE
R
EXTRACT THE
Trk?
EXTRACTION
OK?

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
18
5. If you skip forward all tracks, it asks if you want to end extraction for the master data.
Press “YES” to finish extraction and register selected tracks in HDD.
Press “NO” to add more tracks from this master data.
6. If you press “YES” in step 5, the DSR DVD Standard Pro Series asks you to register
the extracted tracks in HDD.
Press “YES” to start registration.
7. After registration completes, the DSR DVD Standard Pro Series asks you if you want
to extract more tracks from other master audio discs.
Press “YES” to extract more tracks from other master audio discs.
Press “NO” to complete extraction.
8. If you press “NO”, the DSR DVD Standard Pro Series moves back to COPY menu
so that you can copy the extracted tracks in HDD to blank CD-R media.
Error status in Track Extraction:
In the following situation in TRACK EXTRACTION, the DSR DVD Standard Pro Series
shows an error status on the LCD.
1. When you select a track which is not an audio track:
If you try to extract a track which is not CD-DA, the track number does not display
properly, showing “—“. And the “YES” button is invalid even if you press it.
2. When total time of extracted audio tracks is over 80 minutes:
If the total time of extracted audio tracks is over 80 minutes, the DSR DVD Standard Pro Series
displays “OVER” and “YES” button is invalid even if you press it.
EXTRACT THE
Trk? 1/12
END
EXTRACTION?
COPY TO HDD
OK?
NEXT MASTER
COPY START
(
HDD to DISC
)
EXTRACT THE
Trk?
EXTRACT THE
Trk?

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
19
Setup Menu
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows SETUP? (MODE CHANGE)
SETUP?
(MODE CHANGE)
2. Press the Yes button
3. The first setup option is Mode Select, followed by Copy DISC to HD/DISC,
Write Speed, ISRC Check, Copy Quantity, Session Mode, Drive Inquiry,
Firmware Version and Exit.
4. Pressing the No key will allow you to move from menu to menu.
5. Pressing the Yes button will allow you to view or change the configuration of the
system.
6. Please follow the flow chart on page 7 to navigate through the different menus.
Here is a description of each setup menu item:
Mode Select:
COPY - Duplication from master disc to blank disc, or HDD to blank disc if master data
is registered.
VERIFY - It compares a copied disc with the master disc.
COPY+V - Copying in the COPY+VERIFY mode
Copy DISC TO HD/DISC:
Default setting is OFF. When set to ON, this allows you to copy the master disc to a hard
drive partition AND blank discs.
DVD WR Speed:
Available speeds range from 16x down to 1x.
CD WR Speed:
Available speeds range from 48x down to 4x.
ISRC Check:
Default setting is ON. This feature will copy the ISRC codes from the Master audio disc
to the blank discs.
Copy Quantity:
Set up the number of disc you want to copy.
YES: Moves the cursor position to the next place value.
NO: Select the number from 9 to 0 for each place value.

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
20
Session Mode:
For CD only. Invalid for DVD.
Select either from AUTO, CLOSE, or OPEN.
AUTO: Make the session of copied disc as same as the master.
CLOSE: Close the session of copied disc.
OPEN: Leave the session of copied disc open.
Drive Inquiry
It shows an inquiry of each drive connected. You can check the model & firmware
version of each drive.
F/W Version
It shows DSR DVD Standard Pro Series firmware version and H/W Info that shows the
revision of DSR DVD Standard Pro Series main board.