Microh LED MAX PAR User manual

MICROH
LED MAX PAR
Operation Manual

Operation Manual
LED MAX PAR can make very bright colorful and dynamic light scenery effects. It is widely applied to
entertainment halls, clubs and stages etc.
A Specification:
1. Weight: 6.7kg
2. Size: 30×27×22cm
3: Power input: AC 120V/240V, 60Hz/50Hz
4: Wattage: 80W
5: LEDS: 24PCS RGB 3W LEDs: R8, G8, B8
6: Beam angle of LEDs: 30 degree
7: 3PIN female XLR socket and 3PIN male XLR socket
8: Built-in microphone
9, Led digital display
B. Function description:
1, By using MODE button to choose the required working mode, then using UP and DOWN to adjust the relative
reference date：
A．Color Choose ：under this mode，LED display show “C.L.X”, “X”=0-7, press UP or DOWN button
to adjust “X”.
0---BLACK 1---RED 2---green 3---blue 4---purple 5---yellow 6---cyan 7---white
B．Color change: under this mode, the display show “J. X X”, “X X”=01-99 means the speed of color
change, press UP or DOWN button to adjust the speed of color change.
C．Color fade: under this mode, led display show “F.X.X”, “X X”=( 01~99）means the speed of color
fade, press UP or DOWN button to adjust the speed of color fade.
D．Auto mode:：under this mode, led display show “A - -“, auto run the color change and color fade.
E．Sound mode：under this mode, the led display show “S.XX”, “XX”=（00~31）means levels for sound
sensitivity. Press UP or DOWN button to adjust the levels of sound sensitivity.
F．Slave mode：under this mode, the led display show “S.L.A.”，the master fixture decide the running state
of current fixture，the above A~E all have master function.

G．DMX mode 1：under this mode, the led display show “X X X”, X X X=001-512, the current fixture
covers 4 DMX channel.The DMX value and function is as follows:
CHANNEL VALUE FUNCTION
000-189 DIMMER
190-250 FLASH
CH1
251-255 NO FUNCTION
CH2 000-255 RED
CH3 000-255 GREEN
CH4 000-255 BLUE
2, Led display ON/OFF: When the device is turn on, the led display always stays on by press “MODE”
button plus “UP” and press “mode” button plus “off” the led display turn off after 20 seconds in which any
button are not pressed.