Microsens MS657033X User manual

©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
User Manual –Entry Line
Industrial Gigabit Ethernet
High Power 60/95 W PoE Injector

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 2/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Table of Contents
General ................................................................................................................................ 3
Benefits................................................................................................................................ 3
Front View........................................................................................................................... 3
LED Display......................................................................................................................... 4
Dimensional Drawings....................................................................................................... 4
Mounting ............................................................................................................................. 5
Power Supply / Alarm Contact ........................................................................................ 7
Twisted Pair Connections.................................................................................................. 7
Application .......................................................................................................................... 8
Technical Specifications .................................................................................................... 9
Standard Compliance .......................................................................................................10
Safety Notes ......................................................................................................................10
Order Information.............................................................................................................11
Accessories ........................................................................................................................11

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 3/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
General
This 60/95 Watts, high power single port industrial PoE Injector is equipped with
our high efficiency technology to provide up to 95 watts power to your security
equipment. The technology will not only power up your PD device, also reduce
the excessive heat problem to a minimum. It accepts the input voltage from 48
to 56 VDC to meet IEEE802.3af/at required voltage.
Applications for this PoE Injector are high power demanding end devices such as
PTZ cameras with integrated heating and high power lights. It is being rigorously
tested for your security, transportation and telco applications.
Benefits
System Interface/Performance
1x10/100/1000Base-T PoE+ (PSE) port
Supports PSE based on IEEE 802.3af and IEEE 802.3at standards
up to 95 W
1x10/100/1000Base-T data port
Power Supply
48..56 VDC Redundant Dual Power Input
Overload current protection
Reverse polarity protection
Chassis/Installation
IP-30 Protection
DIN-rail and Wall Mount Design
Front View

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 4/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
LED Display
There are diagnostic LED indicators located on the front panel of the industrial
switch. They provide real-time information of system and operational status. The
following table provides description of the LED status and their meanings for the
switch.
LED
Color
Status
Meaning
P1
Green
On
Power 1 is active
Off
Power 1 is inactive
P2
Green
On
Power 2 is active
Off
Power 2 is inactive
Mode A
Green
On
End span PD detected
Off
No PoE supplied
Dimensional Drawings
Dimensional Drawing

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 5/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Mounting
The industrial switch supports two mounting methods: Wall & DIN-rail.
DIN-Rail Mounting
You can also mount industrial switch on a standard DIN-rail by below steps.
The DIN-rail kit is screwed on the industrial switch at delivery. If the DIN-rail kit
is not screwed on the industrial switch, please screw it on the switch first.
1. First, hang the industrial switch to the DIN-rail with angle of inclination.
Installation to DIN-rail (Step 1)
2. Then, lightly push the DIN-rail into the track.
Installation to DIN-rail (Step 2)
3. Check if the DIN-rail is tightened on the track or not.
4. To remove the industrial switch from the track, reverse steps above.

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 6/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Wall mounting
The industrial switch can be wall-mounted by using the included mounting kit.
1. First, use the screws included in the package to combine the industrial
switch and metal mounting kit and remove the DIN-rail adapter.
2. Then fix the switch with some screws to the wall.
Wall mounting brackets

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 7/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Power Supply / Alarm Contact
The power supply is done by an external power supply with an output voltage of
48..56 VDC. This power supply is not included at delivery, but can be ordered
separately (e.g. MS700455). The connection is done by the pluggable screw
terminals on the top of the device. The connection of a redundant power supply
can be done by the second screw terminal. Connect positive wire to P+, negative
wire to P-, also connect grounding/ earth wire to the grounding screw.
Pin out Power Connector and Alarm Contact
WARNING: Any exceeded input voltage will not make this unit function
and may damage this unit!
Warning: Always ground the power source to maintain a clean power
input.
Twisted Pair Connections
The integrated auto-crossing function of all twisted pair ports makes the use of
crossed patch cables unnecessary. The switch automatically detects the pinout of
the connected cable and adapts the port accordingly. For all connections standard
1:1 twisted pair cables can be used.
The Auto-negotiation mechanism detects automatically the speed and
transmission mode (full or half duplex) between connected ports. A manual
configuration is not required.
Note: Always make sure the total length of the TX cable DOES NOT exceed
100meter. Total length is defined as length A + length B.
PD
Remote Switch
A
B

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 8/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
During 100 Mbps transmission, the maximum total cable length is 100 meter.
During 1000 Mbps speed transmission, recommend maximum cable length less
than 90 meter is more desired.
Application

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 9/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Technical Specifications
Type Industrial Gigabit Ethernet 60/ 95 W PoE Injector,
1x 10/100/1000Base-T(X) data,
1x 10/1000/1000Base-T(X) data with PoE
Cable type Unshielded/shielded twisted pair cable, 100 Ohm,
min. category 5e
Data rate 10, 100 or 1000 Mbps
Power-over-Ethernet PoE+ up to 95 W per port according IEEE802.3af/at
LED displays Power 1/2 (green)
Mode A (PoE injected: green)
Mounting 35 mm top-hat rail, according DIN EN 50 022 optional
wall mounting set
Power supply 48..56 VDC, connections with screw terminals,
redundant ports
Power / relay wiring Wire range: 0.34 mm² to 2.5 mm²
Solid wire (AWG):12-24 / 14-22
Stranded wire (AWG): 12-24 / 14-22
Torque:5 lb-In / 0.5 Nm / 0.56 Nm
Wire Strip length: 7-8 mm
Power consumption Typ. 1 W @ 48 VDC without PoE
PoE pin assignment Mode A (End Span), V+ (pin 1, 2), V- (pin 3,6),
V+ (pin 4, 5) and V- (pin 7, 8)
Dimensions 32 x 81.5 x 103.5 mm (w x d x h)
Operating temp. -40° C to 75° C
Storage temp. -40° C to 85° C
Rel. humidity 5% to 95% non-condensing
EMC EN 55022 class A, EN 55024
Shock EN 60068-2-27
Free fall EN 60068-2-32
Vibration EN 60068-2-6
Safety EN 60950-1
CE 2014/30/EU EMC Directive
2011/65/EU RoHS Directive

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 10/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Standard Compliance
IEEE Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE 802.3af for PoE (up to 15 Watts per port for PSE)
IEEE 802.3at for PoE+ (up to 30 Watts per port for PSE)
Safety Notes
DANGER: Conductive components of power and telecommunications networks
can carry dangerously high voltage.
To avoid electric shock:
Do not carry out installation or maintenance work during lightning storms.
All electric installations must be carried out in accordance with local
regulations.

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 11/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Order Information
Art.-No.
Description
Connectors
MS657033X
Industrial GBE High Power PoE Injector up to
95W, IEEE802.3af/at, 2x Data In/PoE Out,
48..56V power input, 40..+75° C
1x RJ-45
1x RJ-45 PoE
2x Power
Accessories
Art.-No.
Description
Connectors
MS700455
DIN Rail mounting power supply 50 Watt
48VDC/1.05 A, input voltage 85–264 VAC,
screw terminals, temp. range -10°C..70°C
In: 3-pin
Out: 4-pin
MS700456
DIN Rail mounting power supply 120 Watt
48VDC/2.5 A, input voltage 93-132/180-264
VAC, screw terminals, temp. range 35°C..70°C
In: 3-pin
Out: 6-pin
MS700457
DIN Rail mounting power supply 240 Watt
48VDC/5 A, input voltage 93-132/180-264 VAC,
screw terminals, temp. range -35°C..70°C
In: 3-pin
Out: 6-pin
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function or design. MICROSENS
does not assume any liability arising out of the application or use of any product. 0317sh