Midea RG70E2(2)/BGEFU1 User manual

CR193-RG70E2(2)BGEU1
16117000001054
20171013
AIR CONDITIONER
REMOTE CONTROLLER ILLUSTRATION
Thank you very much for purchasing our air conditioner.
Please read this owner's manual carefully before using
your air conditioner. Make sure to save this manual for
future reference.
The design and specifications are subject to change without prior notice
for product improvement. Consult with the sales agency or manufacturer
for details.
HEAT

1
CONTENTS
2
Model
Rated Voltage
8m
3.0V(Dry batteries R03/LR03×2)
RG70E2(2)/BGEFU1, RG70E3(2)/BGEF, RG70E2(2)/BGEF
Model: RG70E2(2)/BGEFU1
RG70E2(2)/BGEF
Remote Controller Specifications
Environment
Signal Receiving Range
1
2
4
5
3
9
10
11
12
13
8
6
7
1
2
3
4
ON/OFF Button( )
Turns the air conditioner ON and OFF.
Operation of buttons
Temp Up Button( )
O O
Decreases temperature in 1 C(1 F)
O O
increments. Min. temperature is 16 C(60 F).
Temp Down Button( )
O O
Increases temperature in 1 C(1 F) O O
increments. Max. temperature is 30 C(86 F).
NOTE：
When the air conditioner operates under
heating mode with the set temperature of
O O
16 C(60 F), pressing button twice in
one second will activate 8 Degree heating.
The indoor unit display shows FP .
,,
,,
Scrolls through operation modes as follows:
Mode Button
AUTO COOL
DRY
HEAT FAN
NOTE：Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling only
appliance.
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
air conditioner will automatically operate at
O O
24 C(75 F), with auto fan speed.
ECO Button
1
2
6
7
7
8
9
9
13
Handling the remote controller ......................................................
Remote controller Specifications...................................................
Operation of buttons ............ .........................................................
Indicators on LCD ..........................................................................
How to use the buttons .................................................................
AUTO/COOL operation....................................................................
DRY/FAN operation.........................................................................
HEAT operation ..............................................................................
Setting the Timer function .............................................................
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
NOTE:
Pressing the ECO button, or modifying the
mode or adjusting the set temperature to
O O
less than 24 C(75 F) will stop ECO operation.
The ECO operation will be stopped automatically
after 8 hours. Under ECO operation, the set
O O
temperature should be 24 C(75 F) or more,
it may result in insufficient cooling. If you feel
uncomfortable, just press the ECO button
again to stop it.
Press and hold UP and DOWN buttons
together for 3 seconds will alternate the tem-
O O
perature display between the C & F scale.
o o o o
-5 C~60 C(23 F~140 F)
5
Timer Button
Press this button to initiate the auto-on/
auto-off time sequence.
HEAT

34
7
8
Operation of buttons
Do Not Disturb Button( )
Fan Button
You can not switch the fan speed in AUTO
or DRY mode.
Press Fan, MODE, Sleep, ON/OFF ,ECO or
Gear button will cancel the Silent function.
NOTE：
Hold down this button for at least 2 seconds
to activate/cancel Silent mode. Due to low
frequency operation of compressor, it may
result in insufficient cooling and heating
capacity (applicable to the air conditioner
with Silent feature only)
Operation of buttons
9
10
11
Swing Button(for RG70E(2) series only)
OK Button
Direct Button(for RG70E(2) series only)
Used to confirm the optional functions.
Used to stop or start horizontal louver
movement. The louver will swing up and
down automatically.
Used to set the desired air flow direction.
The louver changes 6 degree in angle for
each press.
Options Button
12
Press this button to select the air conditioner
function in a sequence of following:
Self clean
Sleep
Follow me
Fresh
Press the Options button to select the desired
function, the selected symbol will flash on
the display area, then press the OK button
to confirm.
Repellent
FRESH function( )
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
FOLLOW ME function( )
When the Follow Me function is activated,
the remote display is actual temperature
at its location. The remote control will send
this signal to the air conditioner every 3
minutes interval until press the FOLLOW
ME button again.
Press this button to turn off the indoor screen
display, and also turn off the Air conditioner
buzzer, the fan speed shifts to low, which
create a comfortable and quiet environment.
Press it again to cancel this function.
Under Do Not Disturb mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
2
9
10
11
12
13
8
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
1
4
5
3
6
7
Selects fan speeds in the following order:
AU g
g
20% 60%
40% 80% F%.
gg g
Press the Temp or Temp button to
increase/decrease the fan speed in 1%
increments.
6
Super Button
Press this button under cooling operation,
O o
the set temperature will change to 17 C(62 F),
the fan speed shift to high and bring faster
cooling operation.
Press this button under heating operation,
O o
the set temperature will change to 30 C(86 F),
the fan speed shift to high and bring faster
heating operation.
NOTE:
This function is not available under AUTO,
DRY,FAN,Self Clean or Comfort mode.
Press MODE,FAN,SLEEP or ECO button
will cancel Super function.
Model: RG70E3(2)/BGEF
1
2
4
5
3
9
10
11
12
13
8
6
7
Temp
Mode Fan
OK
Timer
Super
Options
Swing Button(for RG70E3(2)/BGEF only)
Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
Swing Button(for RG70E3(2)/BGEF only)
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The louver changes 6 degree in angle for each
press. If keep pushing more than 2 seconds,
the louver will swing left and right automatically.
Model: RG70E2(2)/BGEFU1
RG70E2(2)/BGEF
HEAT

Indicators on LCD
Information are displayed when the remote controller is powered up.
56
( Indicate optional functions)
SLEEP function( )
Gear Button
13
Press this button to enter the energy efficient
mode in a sequence of following:
75% (up to 75% electrical energy consumption)
50% (up to 50% electrical energy consumption)
Previous setting mode
Turn off the unit or activate ECO, sleep, FP,
Super, Silent or Self clean function will
cancel the electrical energy consumption
control function.
This function is only available under COOL
mode.
NOTE:
Buttons design is based on typical model and might be slightly different from the
actual one you purchased，the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this
feature, there is no corresponding operation happened when press the relative
button on the remote controller.
When there are wide differences between Remote controller Illustration and
USER'S MANUAL on function description, the description of USER'S MANUAL
shall prevail.
,,
,, ,,
,, ,,
,,
2
9
10
11
12
13
8
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
1
4
5
3
6
7
The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
Note: The SLEEP function is not available
in FAN or DRY mode.
,
Transmission Indicator
Horizontal louver
auto swing display
Vertical louver auto
swing display
Not available for this unit
Sleep mode display
Super mode display
Fresh feature display
Follow me feature
display
Not available for
this unit
Not available for
this unit
Silence feature
display
Lights up when remote
sends signal to indoor
unit
ON/OFF display
Appears when the unit
is turned on, and disappears
when the it is turned off.
TIMER ON display
( )
Battery display
Fan speed display
Displays selected fan speed:
Temperature/Timer/Fan
speed display
Displays the set temperature
by default, fan speed or
timer setting when using
TIMER ON/OFF functions
Temperature range:
o O
16-30 C/60-86 F
Timer setting range:
0-24 hours
Fan speed setting range:
AU -F%(100%)
This display is blank when
operating in FAN mode.
Displays when ECO
feature is activated
Low battery detection
MODE display
Displays the current
mode, including:
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
11%-20%
1%-10%
21%-30%
F%(100%)
AUTO
.................
This fan speed can not be
adjusted in AUTO or DRY
mode.
Note:
operation only the relative functional signs are shown on the display window.
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
Repellent function( )
The mosquito repellent module will be
activated which generate some frequency
sound to scare off mosquito.
Displays when select
self clean feature by
Options button
SELF CLEAN function( )
Under SELF CLEAN mode, the air
conditioner will automatically clean and
dry the Evaporator and keep it as fresh
for the next operation. It is not available
under heating or fan mode.
HEAT

Temp
Mode Fan
OK
Timer
Super
Swing
Direct
Options
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
7
How to use the buttons
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed in a range of AU-F%, in
conjunction with Temp or Temp
button.
4. Press the ON/OFF button to start the
unit.
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY mode
based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFFbutton to start the unit.
,
NOTE: FAN SPEED can t be set in Auto mode.
1. Press the MODE button to select DRY
mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFFbutton to start the unit.
,
NOTE: FAN SPEED can t be changed in
DRY mode.
1. Press the MODE button to select FAN
mode.
2.Press the FAN button to select the
fan speed in a range of AU-F%, in
conjunction with Temp or Temp
button.
3. Press the ON/OFFbutton to start the
unit.
,
NOTE: You can t set temperature in FAN
mode. As a result, your remote control s
LCD screen will not display temperature.
How to use the buttons
78
3
3
3
4
3
2
2
2
2
1
1
1
1
SETTING TEMPERATURE
AUTO operation
DRY operation(dehumidifying)
FAN operation
The operating temperature range for units is
O O
16-30 C/60-86 F. You can increase or
O O
decrease the set temperature in 1 C/1 F
increments.
COOL operation
COOL
,
HEAT

910
How to use the buttons
Setting the TIMER function
Temp
Mode Fan
1. Press the MODE button to select
HEAT mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed in a range of AU-F%, in
conjunction with Temp or Temp
button.
4. Press the ON/OFF button to start the
unit.
Your air conditioning unit has two timer-related
functions:
TIMER ON- sets the amount of timer after
which the unit will automatically turn on.
TIMER OFF- sets the amount of time after
which the unit will automatically turn off.
TIMER ON function
The TIMER ON function allows you to set a
period of time after which the unit will
automatically turn on, such as when you
come home from work.
HEAT operation
NOTE: As outdoor temperature drops, the
performance of your unit s HEAT function
may be affected. In such instances, we
recommend using this air conditioner in
conjunction with other heating appliance.
NOTE:
" 0.0h "
When setting the TIMER ON or
TIMER OFF functions, up to 10 hours,
the time will increase in 30 minute
increments with each press. After 10
hours and up to 24, it will increase in 1
hour increments. The timer will revert to
zero after 24 hours.
You can turn off either function by
setting its timer to .
,
2. Press the Temp or button to set
the time when you want the unit to turn
on.
3. Wait 2 seconds, then the TIMER ON
function will be activated. The digital
display on your remote control will then
return to the temperature display.
Example
hours.
: Setting unit to turn on after 2.5
Example
hours.
: Setting unit to turn off after 5
2sec
ON/OFF
MODE
FAN
SHORT
CUT
TIMER ON
TIMER OF
F
TEMP
S
LEEP
1sec
x5
1
3
2
4
Temp
or
TIMER OFF function
The TIMER OFF function allows you to
set a period of time after which the unit
will automatically turn off, such as when
you wake up.
1.
This number indicates the
amount of time after the current time
that you want the unit to tur n on.
For example, if you set TIMER ON for
2 hours, will appear on the
screen, and the unit will turn on after
2 hours.
Press the Timer button, the Timer on
indicator " " displays and flashes. By
default, the last time period that you set
and an "h" (indicating hours)will appear
on the display.
Note:
" 2.0h "
2sec
x10
ON/OFF
MODE
FAN
SHORT
CUT
TIMER ON
TIMER OF
F
TEMP
S
LEEP
1sec
1
3
2
4
Temp
or
Continue to press
Temp or
button until desired
time is reached.
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
4
3
2
1
HEAT
HEAT

11 12
11 12
Setting both TIMER ON and TIMER OFF at the same time
Keep in mind that the time periods you set for both functions refer to hours after the
current time. For example, say that the current time is 1:00 PM, and you want the unit
to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automa-
tically turn off at 9:00 PM.
Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off
(see the figure below)
Your remote display
Do the following:
ON/OFF
ON/OFF
MODE
MODE
SHORT
SHORT
CUT
CUT
TIMER ON
TIMER ON
TEMP
TEMP
3
3
sec
sec
4
8
3
7
X12
X16
2
6
Temp
or
Temp
or
1
5
Timer is set To turn ON
6 hours from current time
Timer is set to turn OFF
8 hours from current time
Current
time 1PM
2PM 3PM 4PM 5PM 6PM 7PM 8PM 9PM
Timer starts Unit turns Unit turns
ON OFF
6 hours later
8 hours later
HEAT

8m
Use the remote controller within a distance of 8 meters from
the appliance, pointing it towards the receiver. Reception is
confirmed by a beep.
The remote controller can be attached to a
wall or pillar by using a remote controller holder
(not supplied, purchased separately).
Before installing the remote controller, check
that the air conditioner receives the signals
properly.
Install the remote controller with two screws.
For installing or removing the remote controller,
move it up or down in the holder.
The following cases signify exhausted batteries.
Replace old batteries with new ones.
Receiving beep is not emitted when a signal
is transmitted.
Indicator fades away.
Location of the remote controller.
Using the remote controller holder
(optional)
The remote controller is powered by two dry
batteries (R03/LR03X2) housed in the back rear
part and protected by a cover.
(1) Remove the back cover of the remote
controller.
(2) Remove the old batteries and insert the new
batteries, placing the(+) and (-) ends correctly.
(3) Install the cover back on.
NOTE: When the batteries are removed, the
remote controller erases all programming. After
inserting new batteries, the remote controller
must be reprogrammed.
Replacing batteries
CAUTIONS
The air conditioner will not operate if curtains, doors or
other materials block the signals from the remote
controller to the indoor unit.
Prevent any liquid from falling into the remote controller.
Do not expose the remote controller to direct sunlight or
heat.
If other electrical appliances react to the remote controller,
either move these appliances or consult your local dealer.
Do not drop the remote controller. Handle with care.
Do not place heavy objects on the remote controller,
or step on it.
CAUTIONS
Do not mix old and new batteries or batteries
of different types.
Do not leave the batteries in the remote
controller if they are not going to be used for
2 or 3 months.
Do not dispose batteries as unsorted
municipal waste. Collection of such waste
separately for special treatment is necessary.
Handling the remote controller
13 14
The device could comply with the local national regulations.
In Canada, it should comply with CAN ICES-3(B)/NMB-3(B).
In USA, this device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance
could void user s authority to operate the equipment.
NOTE:
HEAT

HEAT