Miele TX2349 User manual

Quick Start Guide
Built-in coffee machine
These short instructions are not a substitute for the Operating and installation in-
structions booklet supplied with your coffee machine. Please read the Operating
and installation instructions booklet supplied with your machine before using it for
the first time and take note of the Warning and Safety instructions, as well as the full
descriptions on how to use your machine.
en - AU, NZ M.-Nr. 09 857 271
SPECIAL INSTRUCTIONS SETTINGS CLEANING AND CARE / DESCALING
Cleaning and care Descaling Special instructions Settings
Changing settings
ĺSelect "Settings"in the main menu.
ĺTouch the option you want and change
the setting as required.
ĺTouch "OK" to save the setting.
Tip: Touching takes you back to the
previous menu.
Menu option Available settings Notes
Language deutsch, and other languages
Country
Tip: If you select the wrong language by mistake, you can find the "Language" option by following the
flag symbol .
Time of day Display (Off / On / Night dimming)
Clock type (Analogue / Digital)
Clock format (12 h / 24 h)
Set
Depending on which option you select, the machine may use more energy. A message appears in the
display to inform you of this.
Date Year / Month / Day
Timer Timer 1 (Switch on at / Switch off at / Switch
off after)
Timer 2 (Switch on at / Switch off at)
For "Switch on at" and "Switch off at" to be set, the timer must be activated and at least one day of the
week must be allocated.
Eco mode On / Off
Lighting Brightness (Appliance switched on or
switched off)
Switch off after
Start screen Main menu
Drinks menu
User profiles
MyMiele
Info Number of drinks
"No. of portions until appliance needs descaling" / "No. of portions until brew unit needs degreasing"
System lock On / Off When the system lock is activated, the "Switch on at" option for the timer cannot be selected.
Water hardness Soft / Medium / Hard / Very hard
Display brightness Set
Volume Buzzer tones
Keypad tone
Showroom programme Demo mode (On / Off) This function is intended for presenting the appliance in Miele Centers or retail stores. Do not activate
this function for domestic use.
Plate warmer Automatic / On / Off
Spout adjustment On / Off The height of the central spout cannot be manually adjusted.
Factory default settings Settings
MyMiele
Please note that the following settings will not be reset: Language, Time of day, Number of drinks dis-
pensed, User profiles
Mains water On / Off (Only for CVA 6805)
Changing the portion size or
drink parameters
The changed portion sizes or parameters
are always saved in the current User pro-
file. The name of the current User profile
appears in the top left of the display.
You are in the drinks menu.
ĺPlace the desired cup under the central
spout.
ĺSelect "Edit" and "Change drink".
ĺSwipe across the display until the op-
tion you want appears, then touch it to
select it.
Now you can "Change the portion size" or
adjust the "Drink parameters".
Changing the portion size
ĺTouch "Change the portion size".
The drink will be prepared and "Save" will
appear in the display.
ĺWhen the cup is filled up to the level you
want, touch "Save".
If you want to change portion sizes for
Cappuccino, Latte macchiato or Caffè
latte, the components will be shown in the
display.
ĺTouch the components, whose portion
size you want to change.
The tickwill show you which compo-
nents are selected.
ĺTouch "OK".
When the quantity for each component
reaches the level you want, touch "Save".
ĺSave the required portion size for the se-
lected components.
The combination programmed in and the
total portion size will now be dispensed
every time that particular drink is selected.
Tip: You can cancel portion size program-
ming while "Stop" is visible in the display.
Adjusting drink parameters
ĺTouch "Drink parameters".
You can adjust the following parameters:
– Amount of coffee
– Brewing temperature
– Pre-brewing
ĺTouch "OK" when you have adjust-
ed drink parameters according to your
tastes.
Resetting drink settings
To reset drink portions and parameters for
all drinks to the factory default settings,
ĺselect "Edit" in the drinks menu and then
"Reset drinks".
"Reset all drinks to default settings?" will ap-
pear in the display.
ĺTouch "Yes".
User profiles
You can set up individual User profiles and
save individual portion sizes for all drinks
for each profile.
The name of the current User profile is
shown in the top left of the display.
Calling up User profiles
ĺTouch "User profiles"in the main menu
or select "User profiles" in the drinks
menu.
Creating a User profile
ĺTouch "Create profile".
The editor will open in the display.
ĺSelect the name you want using the key-
board and touch "OK".
If you have allocated a profile in addition
to the Miele standard profile, you have the
option to:
– Select profile
– Change name
– Delete profile
– Change profile
(You can choose whether User pro-
files are changed manually, after a drink
is dispensed, or when the machine is
switched on.)
Editing drinks for User profiles
You can create your own drinks for each
User profile and for each drink you can ad-
just the portion size and other parameters,
e.g. amount of coffee, temperature.
You can assign names to different drinks
within a User profile.
ĺSelect the User profile you want.
Creating a drink
ĺTouch "Create drink" and select the re-
quired drink from the standard drinks.
ĺChange the drink parameters according
to your tastes. Save the quantities of the
individual drink components.
The editor will open in the display.
ĺEnter a name for the new drink and
touch "Save".
If you have already allocated a drink, you
can:
– Change drink
– Delete drink
You can save a maximum of 9 drinks in a
profile.
MyMiele
You can display drinks you make frequent-
ly, drinks from User profiles and mainte-
nance programmes in the MyMiele screen.
Opening the MyMielemenu
ĺTouch "MyMiele"in the main menu.
You can now configure "MyMiele" and add
entries ("Add entry").
Adding an entry
You can select options listed in the follow-
ing categories:
– Drinks
– User Profiles
– Maintenance
ĺTouch "Add entry".
If you have already added some entries,
you can carry out the following under
"Edit":
– Sort entries, or
– Delete entries.
Cleaning the milk pipework
The milk pipework must be cleaned with
the Original Miele cleaning agent for milk
pipework. Cleaning takes approx. 7 min-
utes.
You need one sachet of the cleaning agent
for milk pipework.
The cleaning process cannot be can-
celled once it has started. It must be
completed through to the end.
ĺSelect "Maintenance"in the main
menu and then "Clean the milk pipework".
The cleaning process will start.
ĺFollow the instructions in the display.
ĺFill the water container with lukewarm
water up to the level marker and add
1 sachet of the Original Miele cleaning
agent for milk pipework. Push the water
container back into the machine.
When "Rinse and refill the water container" ap-
pears in the display:
ĺRemove the water container and rinse it
carefully with clean water.
Ensure that no cleaning agent is left in
the water container.
The cleaning process is finished when
"Process finished" appears in the display.
Degreasing the brew unit
After 200 portions have been dispensed,
"Degrease the brew unit" will appear in the
display. This message will not go out until
the brew unit has been degreased.
You need 1 Miele cleaning tablet to de-
grease the brew unit. The process takes
approx. 10 minutes.
The cleaning process cannot be can-
celled once it has started. It must be
completed through to the end.
ĺTouch "Maintenance"in the main
menu and then "Degrease the brew unit".
The process will start.
ĺFollow the instructions in the display.
When "Place a cleaning tablet in the ground
coffee chute and close the chute" appears in
the display:
ĺRemove the coffee chute cover and
open the lid of the coffee chute. Place a
cleaning tablet in the coffee chute.
ĺFollow the further instructions given in
the display.
The degreasing process is finished when
"Process finished" appears in the display.
Descaling must be carried out and takes
approx. 20 minutes.
ĺYou will need 2 Miele descaling tablets.
The cleaning process cannot be can-
celled once it has started. It must be
completed through to the end.
ĺTouch "Maintenance"in the main
menu and then "Descale appliance".
The descaling programme will begin.
ĺFollow the instructions in the display.
ĺFill the water container to the marker 
with lukewarm water and drop two des-
caling tablets in the water. Push the wa-
ter container back into the machine.
Ensure that you adhere to the mixing ra-
tio for the descaling tablets. It is impor-
tant that you do not fill the water con-
tainer with more or less water than pre-
scribed. The descaling programme will
otherwise be cancelled prematurely and
will need to be repeated.
When "Rinse the water container and fill with
fresh tap water up to the  symbol" appears
in the display:
ĺRemove the water container and rinse it
carefully with clean water.
Ensure that no descaling solution resi-
due remains in the water container.
The descaling programme is finished when
"Process finished" appears in the display.

MAKING DRINKS GUIDE TO THE APPLIANCE / PREPARATION CONTROLS AND DISPLAY
Important information Controls and display Making drinks Cleaning and care
M.-Nr. 09 857 271 / 00
CVA 6800, CVA 6805 en – AU, NZ 1914
Please refer to the Operating and installation instructions for more detailed informa-
tion on cleaning and care. Clean the coffee machine every day to avoid a build-up of
bacteria.
Recommended time inter-
val
What do I need to clean?
Every day (at the end of the
day)
– Milk flask with lid
– Water container
– Waste container
– Drip tray and drip tray cover
Once a week (or more often if
necessary)
– Central spout
– Central spout connector
– Clean the milk valve with the cleaning brush
– Interior
– Small drip tray inside the machine door
– Brew unit
– Appliance front (especially important straight af-
ter descaling)
Once a month – Lubricate the cap on the central spout connec-
tor
When prompted – Milk pipework (with the Original Miele cleaning
agent for milk pipework)
– Brew unit (with cleaning tablets)
– Descale the machine when prompted to do so
As required – Coffee bean container
– Clean the milk pipework of any blockages
The following parts must not be cleaned in a dishwasher:
– Central spout cover
– Brew unit
– Coffee bean container and lid
– Service flap
All other removable parts can be cleaned in a dishwasher.
Making espresso or coffee
ĺPlace a cup under the central spout.
ĺTouch the field for the required drink:
Espresso
Coffee
Long coffee
The coffee or espresso will be dispensed
from the central spout into the cup.
Preparing a double portion
To fill two cups at the same time:
ĺPlace one cup under each of the coffee
spouts.
ĺTouch the double symbol for the re-
quired drink.
Two portions of the desired drink will be
dispensed from the central spout.
Cancelling preparation
To cancel preparation:
ĺTouch "Cancel" or "Stop".
Drinks with milk
Notes on the milk flask
Milk is not cooled in the milk flask.
Therefore, place the milk flask in the re-
frigerator if you are not going to use milk
for a while.
Cold milk (below 13 °C) gives the best
results for milk froth.
Lid
Milk sensor
Milk suction tube
Glass milk flask
ĺFill the milk flask up to max. 2 cm below
the rim. Seal the milk flask with the lid.
ĺPush the milk flask into the coffee ma-
chine.
Preparing drinks with milk
ĺPlace a suitable vessel underneath the
central spout.
ĺTouch the drink you want to select it:
Cappuccino
Latte macchiato
Caffè latte
Hot milk
Milk froth
The coffee machine will now prepare the
desired drink.
Preparing hot water
Please note that the water prepared by
the machine is not boiling and is there-
fore not suitable for preparing tea.
ĺPlace a suitable vessel underneath the
hot water spout.
ĺSelect "Hot water".
Hot water will be dispensed into the vessel
under the hot water spout.
To cancel preparation:
ĺTouch "Cancel" or "Stop".
Using for the first time
The coffee machine must be built in
and connected to the mains electricity
supply before operating.Please refer to
the separate Operating and installation
instructions booklet.
ĺClean the appliance and the milk flask
thoroughly before filling with water and
coffee beans.
ĺSee "Setting up and using the coffee
machine" in the Operating and installa-
tion instructions.
Water hardness
Programme the coffee machine to the wa-
ter hardness level of your area so that it
functions correctly and does not get dam-
aged.
Please refer to the Operating and instal-
lation instructions for more detailed infor-
mation.
Filling the water container
Change the water every day to
prevent a build-up of bacteria.
ĺFill the water container with fresh,
cold tap water up to the "max."
marker.
Filling the coffee bean
container
Important! Only fill the bean con-
tainer with roasted espresso or
coffee beans.
ĺOpen the appliance door and re-
move the water container.
ĺFill the container with roasted
coffee beans.
Exterior view
On/Off sensor 
Touch display
"Back" 
Door handle
Steam and hot water spout
Drip tray cover
Automatic height-adjustable central
spout with lighting
Milk flask with lid
Interior view
Ground coffee chute cover
Brew unit
Ground coffee chute
Slide control for the grinder setting
Coffee bean container
Water container
Drip tray with grid
Waste container
Drip tray inside machine door
Central spout connector
Service flap
Guide to the appliance Preparation
Sensors
On/Off sensorFor switching appliance on and off
"Back" For returning to the previous menu, cancelling unwanted actions
Touch display
Selecting or calling up
a menu
ĺTouch the field you want to select it.
Scrolling through
menus
ĺSwipe the screen, i.e. place your finger on the Touch display and swipe it in the direc-
tion you want.
ĺOr: Using your finger, touch the arrows und to scroll left or right.
Exiting a menu ĺTouch.
All selected entries which have not been confirmed with "OK" will not be saved.
Entering numbers You can enter numbers by scrolling through and touching the roller, or by using the nu-
merical keypad.
Number roller:
ĺSwipe the roller up or down to select the number you want.
Numerical keypad:
ĺTouch in the bottom right of the input field.
The numerical keypad appears.
ĺTouch the required numbers.
Once you have entered an accepted value, "OK" will light up green.
ĺUse the arrow to delete the last entered number.
ĺTouch "OK".
Entering letters You can enter names for your own User programmes or drinks using a keyboard. Try to
use short, concise names.
ĺTouch the required letters or characters.
ĺTouch "Save".