Miele DA 289-3 Parts list manual

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Product Dimensions
Decorator Wall Hood
DA289-3
110 Volt - 15 Amp 3-wire molded plug
power supply connects through top or
rear of chimney.
Standard 110 Volt Outlet
35 1/4"
22 3/16"
5 1/4"
Notes
• All installations must be done in
accordance with local codes.
• 6" duct connects to blower system inside
chimney.
Location Codes
E -
O -
E
9 7/8"
12 5/8"
O
37 13/16" - 51 15/16"
Front Perspective

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Notes
• Center unit over cooking surface
• Distance "S" is determined by the cooking
surface. Minimum distance "S" is:
- 14 3/8" for all surfaces
• Area behind mounting plates MUST be
reinforced using a minimum of 1/2"
plywood. Reinforcing material should be
affixed to structural wall members
Mounting plate "B"
Installation Dimensions
Decorator Wall Hoods
DA289-3
Ceiling Line
15 3/4 "
Center Line
Structural member
S + 30 7/8 "
Mounting
Holes
Area must be reinforced
with a minimum of
1/2" plywood backing
Front Perspective
Mounting plate "C"