Milescraft TurnLock SpiroCrafter 1204 Guide

1
SpiroCrafter ™Designs Manual
Milescraft Inc.
Rockford, IL 61109
www.milescraft.com
Model
1204

2 SpiroCrafter™Designs Manual
Design #5
Design Size: Choice of 1 3/4"
(70 mm), 2 9/16" (100 mm)
or 3 5/16" (130 mm)
Template Window: 1 & 2 or 3
Portion of Window Cut: All
Rotation: 1
Bushing: 17
Bit: (For Router) Straight (3 –4
mm), V-Groove (lettering),
Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #6
Design Size: 3 5/16" (130 mm)
Template Window: 1 & 2 & 3
Portion of Window Cut:
(First Pass): 1- All
(Second Pass): 2 - Template
positioned with Tip at 12 o’clock –Tip
(Third Pass): 3 - Template positioned
so curve of Window 3 intersects
point of Window 2- Tip
Rotation: 2 for all
Bushing: 17
Bit: (For Router) Straight, Round Nose,
V-Groove (lettering), Any Decorative
Plunge
Bit: (For Rotary Tool) Straight, Round
Nose, V-Groove (lettering),
Design #1
Design Size: 1 3/4" (70 mm)
Template Window: 1
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router)
Straight, Round Nose,
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool)
Straight, Round Nose,
V-Groove (lettering)
Design #2
Design Size: 2 9/16" (100 mm)
Template Window: 2
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router)
Straight, Round Nose,
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool)
Straight, Round Nose,
V-Groove (lettering)
Design #3
Design Size: 3 5/16" (130 mm)
Template Window: 3
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router)
Straight, Round Nose,
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool)
Straight, Round Nose,
V-Groove (lettering),
TEMPLATE #1
Designs
All designs made with Template #1.
Design #4 (Composed of
an overlay of Designs
1, 2 and 3)
Design Size: 3 5/16" (130 mm)

3
Design #7
Design Size: 2 9/16" (100 mm)
Template Window: 1 & 2
Portion of Window Cut:
All on 1, Tip on 2
Rotation: 1
Bushing: 17
Bit: (For Router) Straight (3-4mm),
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #8
Design Size: 3 5/16" (130 mm)
Template Window: 6
Portion of Window Cut: All
Rotation: 1
Bushing: 17
Bit: (For Router) Straight (3-4mm),
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #9
Design Size: 3 5/16" (130 mm)
Template Window: 1 & 4
Portion of Window Cut: All on both
Rotation: 1 on 1, 2 on 4
Bushing: 17
Bit: (For Router) Straight (3-4mm),
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #11
(A Surround for Design #1)
Design Size: 3 5/16" (130 mm)
Template Window: 6
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router) Straight, Round
Nose, V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
Round Nose, V-Groove (lettering),
Design #11 (Alternate)
Design Size: 3 5/16" (130 mm)
Template Window: 6
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router) Straight, Round
Nose, V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
Round Nose, V-Groove (lettering),
Design #10
Design Size: 3 5/16" (130 mm)
Template Window: 2 & 5
Portion of Window Cut:
(First Pass): 2 - All
(Second Pass): 5 – Template
positioned so Window 5 is
aligned between two side-by-
side Window 2 designs- All
Rotation: 2 on both
Bushing: 17
Bit: (For Router) Straight, Round
Nose, V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
Round Nose, V-Groove (lettering),

4 SpiroCrafter™Designs Manual
Design #12
Design Size: 3 5/16" (130 mm)
Template Window: 3 & 6
Portion of Window Cut:
(First Pass): 3 - All
(Second Pass): 6 – Template
positioned so Window 6 is
between two Window 3
designs- All
Rotation: 4 on both
Bushing: 17
Bit: (For Router) Straight, Round
Nose, V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
Round Nose, V-Groove (lettering),
Design #13
Design Size: Window 1: 2 9/16"
(100 mm); Window 2: 3 5/16"
(130 mm)
Template Window: 1 & 2
Portion of Window Cut:
(First Pass): 1 - All
(Second Pass): 2 – Template
positioned so Window 2 is
between two Window 1
designs- All
Rotation: 4 on both
Bushing: 17
Bit: (For Router) Straight, Round
Nose, V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
Round Nose, V-Groove (lettering),
Design #14
Design Size: Window 2: 9/16"
(100 mm) and Window 3:
3 5/16" (130 mm)
Template Window: 3 & 2
Portion of Window Cut:
(First Pass): 3 - All
(Second Pass): 2 – Template
positioned so 2 Window 2
designs are between one
Window 1 design- All
Rotation: 6 on 3, 2 on 2
Bushing 17
Bit: (For Router) Straight, Round
Nose, V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
Round Nose, V-Groove (lettering),
NOTES

5
Lacework #1
Design Size: 1 3/4" (70mm),
2 9/16" (100 mm) and
3 5/16" (130 mm)
Template Window: 1 & 2 or 3
Portion of Window Cut: All
Rotation: 4
Bushing: 17
Bit: Straight (3-4mm)
Bit: (For Rotary Tool) Straight
Lacework #2
Design Size: 1 1/2" (60mm),
2 5/16" (90 mm) and
3" (120 mm)
Template Window: 1 & 2 or 3
Portion of Window Cut: All
Rotation: 2
Bushing: 24
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
Lacework #3
Design Size: 3 5/16" (130 mm)
Template Window: 2 & 6
Portion of Window Cut:
(First Pass): 2 - All
(Second Pass): 6 – Template
positioned so Window 6 design
is between two Window 2
designs- All
Rotation: 4 on both
Bushing: 17
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
All designs made with Template #1.
Lacework #4
Design Size: 3 5/16" (130 mm)
Template Window: 1, 5 & 6
Portion of Window Cut:
(First Pass): 1 - All
(Second Pass): 6 – Template
positioned so Window 6
design is between two
Window 1 designs- All
(Third Pass): 5 – Template
positioned so Window 5
design is between two
Window 6 designs- All
Rotation: 4 on all
Bushing: 17
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
Lacework #5
Design Size: 3" (120 mm)
Template Window: 2 & 6 & 5
Portion of Window Cut:
(First Pass): 2 - All
(Second Pass): 6 – Template
positioned so Window 6
design is between two
Window 2 designs- All
(Third Pass): 5 – Template
positioned so Window 5
design is between two
Window 6 designs- All
Rotation: 2 on all
Bushing: 24
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
Lacework #6
Design Size: 3 5/16" (130 mm)
Template Window: 1 & 4
Portion of Window Cut:
(First Pass): 1 - All
(Second Pass): 4 – Template
positioned so Window 4
design is centered above
Window 1 design- All
Rotation: 3 on both
Bushing: 17
Bit: (For Router) Straight (3 mm)
Bit: (For Rotary Tool) Straight
TEMPLATE #1
Lacework

6 SpiroCrafter™Designs Manual
Lacework #7
Design Size: 3" (120 mm)
Template Window: 2 & 4
Portion of Window Cut:
(First Pass): 2 - All
(Second Pass): 4 – Template
positioned so Window 4 design
is between two Window 2
designs- All
Rotation: 2 on both
Bushing: 24
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
Lacework #8
Design Size: 3" (120 mm)
Template Window: 3 & 5
Portion of Window Cut:
(First Pass): 3 - All
(Second Pass): 5 – Template
positioned so Window 5 design
is between two Window 3
designs- All
Rotation: 2 on both
Bushing: 24
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
Lacework #9
Design Size: 2" (80 mm) or
2 5/16" (90 mm)
Template Window: 3 & 2
Portion of Window Cut:
(First Pass): 3 - All
(Second Pass): 2 – Template
positioned so 2 Window 2
designa are between two
Window 3 designs- All
Rotation: 6 on 3, 2 on 2
Bushing: 24
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
NOTES

7
Cutout #1
Design Size: Choice of
1 3/4" (70 mm),
2 9/16" (100 mm) or
3 5/16" (130 mm)
Template Window: 1 & 2 or 3
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router) Straight (3 mm)
Bit: (For Rotary Tool) Straight
Cutout #2
Design Size: Choice of 1 3/4"
(70 mm), 2 9/16" (100 mm)
or 3 5/16" (130 mm)
Template Window: 1, 2 or 3
Portion of Window Cut:
(First Pass): 1, 2 or 3 - Right,
Tip
(Second Pass): 1, 2 or 3 –
Template positioned one
notch further right on base
plate than at start of first
pass - Left and Tip
Rotation: 4 on both
Bushing: 17
Bit: (For Router) Straight (3 mm)
Bit: (For Rotary Tool) Straight
Cutout #3
Design Size: 2 7/8" (115 mm)
Template Window: 2 & 5
Portion of Window Cut:
(First Pass): 2 - All
(Second Pass): 5 – Template
positioned so center of
Window 5 is above point on
Window 2) - Bottom
Rotation: 2 on both
Bushing: 17
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
All designs made with Template #1.
Cutout #4
Design Size: 3 5/16" (130 mm)
Template Window: 2 & 6
Portion of Window Cut:
(First Pass): 2 - All, 6 - Tip
(Second Pass): 6 - Template
positioned so center of
Window 6 is above point on
Window 2) - Bottom
Rotation: 4 on all
Bushing: 17
Bit: (For Router) Straight (3 mm)
Bit: (For Rotary Tool) Straight
Cutout #5
Design Size: 3 5/16" (130 mm)
Template Window: 6 & 4
Portion of Window Cut:
(First Pass): 6 - Bottom
(Second Pass): 4 – Template
positioned so center of
Window 4 is above center
point between two Window 6
designs - bottom
Rotation: 2 on both
Bushing: 17
Bit: (For Router) Straight (3-4
mm)
Bit: (For Rotary Tool) Straight
Cutout #6
Design Size: Choice of
1 3/4" (70 mm),
2 9/16" (100 mm) or
3 5/16" (130 mm)
Template Window: 2 or 3
Portion of Window Cut:
(First Pass): 2 - All
(Second Pass): 4 – Template
positioned so center of
Window 4 is above center
point between two Window 6
designs - bottom
Rotation: 4 on all
Bushing: 17
Bit: 1 (3 mm)
TEMPLATE #1
Cutouts

8 SpiroCrafter™Designs Manual
Cutout #7
Design Size: 2 9/16" (100 mm) and
3 5/16" (130 mm)
Template Window: 2 & 3
Portion of Window Cut:
(First Pass): 2 - Tip
(Second Pass): 3 – Template
positioned so center of Window
3 is above center point of
Window 2 design- Tip
Rotation: 2 on both
Bushing: 17
Bit: (For Router) Straight (3 mm)
Bit: (For Rotary Tool) Straight
NOTES

9
Design #1
Design Size: 1 3/4" (70 mm)
Template Window: 1
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router) Straight
(3-4 mm), V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #2
Design Size: 1 3/4" (70 mm)
Template Window: 1
Portion of Window Cut: All
Rotation: 4
Bushing: 17
Bit: (For Router) Straight
(3, 4, 5 mm),V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool)
Straight, V-Groove (lettering),
Design #3
Design Size: 1 3/4" (70 mm)
Template Window: 1
Portion of Window Cut: All
Rotation: 3
Bushing: 17
Bit: (For Router) Straight
(3, 4, 5 mm),V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool)
Straight, V-Groove (lettering),
TEMPLATE #2
Designs
All designs made with Template #2.
Design #4 (Small corners
added to Design #3)
Design Size: 1 7/8" (75 mm)
Template Window: 2
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router) Straight
(3, 4 mm),V-Groove
(lettering), Any Decorative
Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #5 (Small ovals
added to Design #4)
Design Size: 2 9/16" (100 mm)
Template Window: 3
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router) Straight
(3, 4 mm), V-Groove
(lettering), Any Decorative
Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #6 (Large corners
added to Design #5)
Design Size: 2 7/8" (115 mm)
Template Window: 4
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router) Straight (3, 4
mm), V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),

10 SpiroCrafter™Designs Manual
Design #6 Alternate (Rotate
template 45º and repeat
Design #6)
Design #7 (Circular elements
added to Designs 1, 2 or 3)
Design Size: 3" (120 mm)
Template Window: 3 (Outer Circle)
2 & 4 (Inner Circle)
Portion of Window Cut: All for #3,
round side for 2 & 4
Rotation: 4 for all
Bushing: 17
Bit: (For Router) Straight (3, 4 mm),
V-Groove (lettering),
Any Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Design #8 (Corner elements
added to Designs 1, 2 or 3)
Design Size: 3" (120 mm)
Template Window: 2 (angles), 3
(arc), 4 (outer corner)
Portion of Window Cut: Tip for 2,
round side for 3, all for 4
Rotation: 6 for all
Bushing: 17
Bit: (For Router) Straight (3, 4 mm),
V-Groove (lettering), Any
Decorative Plunge
Bit: (For Rotary Tool) Straight, V-
Groove (lettering),
Design #9
Design Size: 2 9/16" (100 mm)
Template Window: 2
Portion of Window Cut: All
Rotation: 4
Bushing: 17
Bit: Any choice
Can insert Design 1, 2 or 3
if desired.
Design #10
Design Size: 2 9/16" (100 mm)
Template Window: 2
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router) Straight (3 mm),
V-Groove (lettering), Any
Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Can insert Design 1, 2 or 3
if desired.
Design #12
Design Size: 2 9/16" (100 mm)
Template Window: 3
Portion of Window Cut: All
Rotation: 4
Bushing: 17
Bit: Any choice
Can insert Design 1, 2 or 3
if desired.
Design #13
Design Size: 2 9/16" (100 mm)
Template Window: 3
Portion of Window Cut: All
Rotation: 2
Bushing: 17
Bit: (For Router) Straight (3 mm),
V-Groove (lettering),
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Can insert Design 1, 2 or 3
if desired.
Design #14
Design Size: 1 7/8" (74mm),
2 9/19" (100 mm), 3" (118 mm)
Template Window: 2 & 3 & 4
Portion of Window Cut: round side
Rotation: 3
Bushing: 17
Bit: Any choice
Can insert Design 1, 2 or 3
if desired.
Design #11
Design Size: 4" (160 mm)
Template Window: 2 & 4
Portion of Window Cut:
All for 2, Tip for 4
Rotation: 2 for both
Bushing: 17
Bit: (For Router) Straight (3 mm),
V-Groove (lettering), Any
Decorative Plunge
Bit: (For Rotary Tool) Straight,
V-Groove (lettering),
Can insert Design 1, 2 or 3
if desired.

11
Lacework #1
Design Size: 2 7/8" (115 mm)
Template Window: 2 & 3 & 4
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router)
Straight (3 -4 mm)
Bit: (For Rotary Tool) Straight
Lacework #2
Design Size: 2 7/8" (115 mm)
Template Window: 1 & 3 & 4
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router)
Straight (3 - 4 mm)
Bit: (For Rotary Tool) Straight
Lacework #3
Design Size: 2 9/16" (100 mm)
Template Window: 2 & 3
Portion of Window Cut: All
Rotation: 6
Bushing: 17
Bit: (For Router)
Straight (3 - 4 mm)
Bit: (For Rotary Tool) Straight
All designs made with Template #2.
TEMPLATE #2
Lacework

12 SpiroCrafter™Designs Manual
Cutout #1
Design Size: 4" (160 mm)
Template Window: 2 & 4
Portion of Window Cut: Tip
Rotation: 4
Bushing: 17
Bit: (For Router)
Straight (3 -4 mm)
Bit: (For Rotary Tool) Straight
Cutout #2
Design Size: 2 7/8" (115 mm)
Template Window: 4 & 2
Portion of Window Cut:
Round side 4, Tip 2
Rotation: 3 on 4, 4 on 2
Bushing: 17
Bit: (For Router) Straight (4 mm)
Bit: (For Rotary Tool) Straight
Cutout #3
Design Size: 2 9/16" (100 mm)
Template Window: 1 & 3
Portion of Window Cut: All on 1,
Round side on 3
Rotation: 6 on 1, 4 on 3
Bushing: 17
Bit: (For Router)
Straight (3 - 4 mm)
Bit: (For Rotary Tool) Straight
TEMPLATE #2
Cutouts
All designs made with Template #2.
Cutout #4
Design Size: 3" (120 mm)
Template Window: 1 & 2 & 3
Portion of Window Cut:
All for all
Rotation: 3 on 1, 6 on 2 & 3
Bushing: 17
Bit: (For Router) Straight (3-4mm)
Bit: (For Rotary Tool) Straight
0104