Milwaukee MXF TL User manual

MXF TL
Original instructions
4100 470 356 - MXFTL.indd 14100 470 356 - MXFTL.indd 1 05.05.2021 11:08:0805.05.2021 11:08:08

2
-
8
15
14
13
12
-
+
ON/OFF
4100 470 356 - MXFTL.indd 24100 470 356 - MXFTL.indd 2 05.05.2021 11:08:0805.05.2021 11:08:08

3
4
6
16
1710
Text section with Technical Data, important Safety
and Working Hints and description of Symbols
18
4100 470 356 - MXFTL.indd 34100 470 356 - MXFTL.indd 3 05.05.2021 11:08:0805.05.2021 11:08:08

4
Remove the battery pack
before starting any work on
the machine.
click
3
1
2
1
2
4100 470 356 - MXFTL.indd 44100 470 356 - MXFTL.indd 4 05.05.2021 11:08:0905.05.2021 11:08:09

5
click
1
2
3
4
-
+
4100 470 356 - MXFTL.indd 54100 470 356 - MXFTL.indd 5 05.05.2021 11:08:0905.05.2021 11:08:09

6
1
2
click...click...click...
The light must be placed level and
stable. The supports can be
individually adapted for this.
4100 470 356 - MXFTL.indd 64100 470 356 - MXFTL.indd 6 05.05.2021 11:08:0905.05.2021 11:08:09

7
1
3
2
click
4100 470 356 - MXFTL.indd 74100 470 356 - MXFTL.indd 7 05.05.2021 11:08:0905.05.2021 11:08:09

8
max. 3100 mm
4100 470 356 - MXFTL.indd 84100 470 356 - MXFTL.indd 8 05.05.2021 11:08:0905.05.2021 11:08:09

9
For manual retraction, release the
lock. 1
2
3
4100 470 356 - MXFTL.indd 94100 470 356 - MXFTL.indd 9 05.05.2021 11:08:1005.05.2021 11:08:10

10
1
2
3
4100 470 356 - MXFTL.indd 104100 470 356 - MXFTL.indd 10 05.05.2021 11:08:1005.05.2021 11:08:10

11
4
5
4100 470 356 - MXFTL.indd 114100 470 356 - MXFTL.indd 11 05.05.2021 11:08:1005.05.2021 11:08:10

12
-
+
-
+
ON
OFF
1 sec
This machine must be activated
before switching on.
Press button, LEDs will light up, machine is
ready to start.
After 15 minutes of inactivity, the machine goes
into sleep mode.
Press button for 1 sec. to reactivate the
machine.
Press button again for 1 sec. to deactivate the
machine.
4100 470 356 - MXFTL.indd 124100 470 356 - MXFTL.indd 12 05.05.2021 11:08:1005.05.2021 11:08:10

13
-
+
-
+
1.
1.
2.
2.
3.
3.
4.
START
STOP
If the light is plugged into a AC outlet, the light
runs in AC mode. Currently the battery will be
charged.
4100 470 356 - MXFTL.indd 134100 470 356 - MXFTL.indd 13 05.05.2021 11:08:1005.05.2021 11:08:10

14
-
+
77-100 %
55-77 %
32-55 %
10-32 %
< 10 %
8x
4x
4100 470 356 - MXFTL.indd 144100 470 356 - MXFTL.indd 14 05.05.2021 11:08:1005.05.2021 11:08:10

15
For detailed description of ONE-KEY-
function, see text section.
4100 470 356 - MXFTL.indd 154100 470 356 - MXFTL.indd 15 05.05.2021 11:08:1105.05.2021 11:08:11

16
1
2
3
3V CR2032
4100 470 356 - MXFTL.indd 164100 470 356 - MXFTL.indd 16 05.05.2021 11:08:1105.05.2021 11:08:11

17
4100 470 356 - MXFTL.indd 174100 470 356 - MXFTL.indd 17 05.05.2021 11:08:1105.05.2021 11:08:11

18
Do not try to charge non-
rechargeable batteries with this
charger.
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
Never break open battery packs or chargers and store only
in dry rooms. Keep dry at all times.
The battery clamps of the charger are fed by the mains
supply. Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new
one.
Before use check machine, cable, and plug for any
damages or material fatigue. Repairs should only be
carried out by authorised Service Agents.
Use only System MXF chargers for charging System MXF
battery packs. Do not use battery packs from other
systems.
This appliance is not intended to
be used or cleaned by persons
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless
they have been given instructions
concerning the safe use of the
appliance by a person legally
responsible for their safety. They
should be supervised whilst using
the appliance. Children shall not
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
BATTERY LAMP SAFETY INSTRUCTIONS
WARNING Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may
result in serious injury or vision loss.
WARNING This device contains a lithium button/coin
cell battery. A new or used battery can cause severe
internal burns and lead to death in as little as 2 hours if
swallowed or enters the body. Always secure the battery
cover. If it does not close securely, stop using the device,
remove the batteries, and keep it away from children. If you
think batteries may have been swallowed or entered the
body, seek immediate medical attention.
Caution – this product is provided with cooling openings in
the bottom enclosure. Only install this luminaire on a
surface that will not allow accumulation of water into the
housing. Keep the product away from puddles,etc.
CHARGER SAFETY INSTRUCTIONS
Only the following battery packs
can be charged with this charger:
Battery
Cat. No.
Cell
Type
DC
Volts
Capacity Cell
No.
MXFCP203 Li-Ion 72 V ≤3.0 Ah 20
MXFXC406 Li-Ion 72 V ≤6.0 Ah 2 x 20
ENGLISH
МXF TL (EU 220-240V) MXF TL (UK 110V) MXF TL (UK 220-240V)
........... 4747 66 01 ..............4747 75 01...............4747 85 01
... 000000 - 999999 ... 000000 - 999999 ... 000000 - 999999
.............. 220-240 V ......................110 V ....................... 220-240 V
............50 - 60 Hz............... 50 - 60 Hz ................50 - 60 Hz
...............960 W..................... 960 W ......................960 W
................IP 55....................... IP 55 ........................... -
................IP 55....................... IP 55 ........................IP 55
...............480 W..................... 480 W ......................480 W
................ 4,5 A........................4,5 A.........................4,5 A
..................3 h .......................... 3 h ........................... 3 h
..................6 h .......................... 6 h ........................... 6 h
.................10 h ........................ 10 h ......................... 10 h
.............27000 lm................. 27000 lm ..................27000 lm
.............14000 lm................. 14000 lm ..................14000 lm
..............7000 lm................... 7000 lm ....................7000 lm
.............20000 lm................. 20000 lm ..................20000 lm
.............10000 lm................. 10000 lm ..................10000 lm
..............5000 lm................... 5000 lm ....................5000 lm
.................. 80 ............................80.............................80
.............. 4000 K ....................4000 K..................... 4000 K
................48 kg....................... 48 kg ........................48 kg
........... 51 ... 53 kg ..............51 ... 53 kg............... 51 ... 53 kg
....... 2402-2480 MHz ......2402-2480 MHz....... 2402-2480 MHz
............. 1,8 dBm ..................1,8 dBm................... 1,8 dBm
......40BT signal mode... 40BT signal mode ... 40BT signal mode
....................................... -18°C ... +50 °C
............................... MXF CP203, MXF XC406
TECHNICAL DATA BATTERY-LAMP
Production Code....................................................................
Voltage...................................................................................
Frequency..............................................................................
Rated Power Input Lamp.......................................................
Protection class (AC-Mode)...................................................
Protection class (DC-Mode) ..................................................
Charger rated power input.....................................................
Quick charge current .............................................................
Lighting time with one fully charged battery (6.0 Ah)
High Level...........................................................................
Med Level ...........................................................................
Low Level ...........................................................................
Luminous flux AC-Mode
High Level...........................................................................
Med Level ...........................................................................
Low Level ...........................................................................
Luminous flux DC-Mode
High Level...........................................................................
Med Level ...........................................................................
Low Level ...........................................................................
Colour rendering index (CRI).................................................
Colour temperature................................................................
Weight without packing and battery.......................................
Weight according EPTA-Procedure 01/2014 (3.0 Ah...6.0 Ah) ..
Frequency band(s) of Bluetooth ............................................
Radio-frequeny power ...........................................................
Bluetooth version...................................................................
Recommended ambient operating temperature......................
Recommended battery types...................................................
4100 470 356 - MXFTL.indd 184100 470 356 - MXFTL.indd 18 05.05.2021 11:08:1205.05.2021 11:08:12

19ENGLISH
use, clean or play with this
appliance, which when not in use
should be secured out of their
reach.
ADDITIONAL SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the
appliance.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it offimmediately with soap and
water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The area light is intendend to be used light independent
use away from mains supply.
Additionally the charger can charge the specified
Milwaukee battery packs.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole
responsibility that the product described under “Technical
Data” fulfills all the relevant regulations and the directives
2011/65/EU (RoHS), 2014/53/EU, 2006/42/EC, and the
following harmonized standards have been used:
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+
A14:2019+A2:2019
EN 60335-2-29:2004+A2:2010+A11:2018
EN 60598-1:2015+A1:2018
EN 60598-2-4:2018
EN 62233:2008
EN 62493:2015
EN 61547:2009
EN 55015:2013+A1:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 301 489-1 V2.2.3
EN 301 489-17 V3.1.1
EN 300 328 V2.2.2
EN 62479:2010
EN IEC 63000:2018
Winnenden, 2021-05-05
Alexander Krug
Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole
responsibility that the product described under “Technical
Data” fulfills all the relevant provisions of the following
Regulations S.I. 2008/1597 (as amended), S.I. 2017/1206
(as amended), S.I. 2012/3032 (as amended) and that the
following designated standards have been used:
BS EN 60335-1:2012+A13:2017+A2:2019
BS EN 60335-2-29:2004+A11:2018
BS EN 60598-1:2015+A1:2018
BS EN 60598-2-4:2018
BS EN 62233:2008
BS EN 62493:2015
BS EN 61547:2009
BS EN 55015:2013+A1:2015
BS EN 61000-3-2:2014
BS EN 61000-3-3:2013
EN 301 489-1 V2.2.3
EN 301 489-17 V3.1.1
EN 300 328 V2.2.2
BS EN 62479:2010
BS EN IEC 63000:2018
Winnenden, 2021-05-05
Alexander Krug
Managing Director
Authorized to compile the technical file.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
FUEL GAUGE
When the machine is armed, the fuel gauge displays the
battery pack's remaining run time. The fuel gauge mirrors
the fuel gauge on the battery pack. When less than 10% of
charge is left, one light on the fuel gauge will flash 4 times.
When the battery reaches 0% charge, the fuel gauge will
flash 8 times. Charge the battery pack.
10-32% 32-55% 55-77% 77-100%
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool,
please reference the Quick Start guide included with this
product or go to www.milwaukeetool.com/one-key. To
download the ONE-KEY app, visit the App Store or Google
Play from your smart device.
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset
manually to recover.
In the event of a Bluetooth communication dropout outside
of the exclusion band (2280MHz – 2603.5MHz) due to
radio frequency interference, a manual reset may be
initiated to reestablish the link.
We considered the results to be within our minimum
acceptable performance level according to EN 61547:2009
/ EN 301489-1 / EN 301489-17.
4100 470 356 - MXFTL.indd 194100 470 356 - MXFTL.indd 19 05.05.2021 11:08:1305.05.2021 11:08:13

20 ENGLISHENGLISH
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready to be
configured via the ONE-KEY™ app.
Blinking Blue Tool is actively communicating with the
ONE-KEY™ app.
Blinking Red Tool is in security lockout and can be
unlocked by the owner via the ONE-
KEY™ app.
MAINS CONNECTION
Connect only to single-phase AC current and only to the
system voltage indicated on the rating plate. It is also
possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
CHARGING TIME
Battery Cat. No. Volts Capacity Charging Time
approx.
MXFCP203 72 V ≤3.0 Ah 45 min
MXFXC406 72 V ≤6.0 Ah 90 min
LI-ION BATTERIES
The rechargeable batteries are partially charged. The LED
on the battery indicates the state of charge.
If it is not used for long periods, the rechargeable battery
will switch to the non-operative state.
When fully discharged the rechargeable battery switches
offautomatically (depth discharge not possible).
Under extreme circumstances, the internal temperature of
the battery could become to high. If this happens, the
battery will shut down.
Place the battery on the charger to charge and reset it.
The state of charge can be read by pressing the button on
the rechargeable battery. The battery can be left in the
electric tool while the reading is taken but it must be
switched offat least one minute beforehand (otherwise the
display will be inaccurate). The number of LEDs illuminated
indicates the state of charge. A flashing LED indicates a
max. power reserve of 10%.
As a general principle, if the electric tool should fail to work
after inserting the rechargeable battery, then the battery
should be plugged into the charger. The displays on the
battery and charger will then provide information about the
condition of the battery.
In low temperatures work may continue at reduced output.
CHARACTERISTICS
After inserting the battery into the reception of the charger
the battery will automatically be charged (red control lamp
is illuminated continuously)
When a hot or cold battery pack is inserted into the charger
(flashing red lamp), charging will begin automatically once
the battery reaches the correct charging temperature
(0°C...40°C). The max. charging current is flowing when
the temperature of the Li-Ion-battery is between 0°C and
30°C.
The battery’s charging time is between 45 min and 90 min,
depending on the state of discharge.
Once the battery is fully charged, the LED on the charger
changes from red to green.
Remove the battery pack from the tool for charging when
convenient for you and your job. Milwaukee batteries do
not develop a memory when charged after only a partial
discharge. It is not necessary to run down the battery pack
before placing it on the charger.
As a general practice, it is best to unplug battery chargers
and remove batteries when not in use. No battery pack
damage will occur, however, if the charger and battery pack
are left plugged in.
The charger will keep the battery pack fully charged if it is
left on the charger. The light indicator will be same as
normal charging.
If the light indicator flashes red and green, check that the
battery pack is fully seated into the bay. Remove the
battery pack and reinsert. If the light continues to flash red
and green, remove pack(s) and unplug charger for at least
2 minutes. After 2 minutes, plug charger back in and insert
pack. If the problem persists, contact a MILWAUKEE
service facility.
LIGHT INDICATORS
Continuous red Charging
Slow flashing
green Approaching full charge
Continuous green Charging is complete
Fast flashing red
Battery or charger is too
hot/cold - charging will
begin/resume when battery
or charger reaches correct
charging temperature
Flashing red/
green
Damaged or faulty battery
pack or charger
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the
battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
The battery pack has overload protection that protects it
from being overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch offthe
machine automatically. To restart, switch the machine off
and then on again. If the machine does not start up again,
the battery pack may have discharged completely. In this
case it must be recharged in the battery charger.
4100 470 356 - MXFTL.indd 204100 470 356 - MXFTL.indd 20 05.05.2021 11:08:1305.05.2021 11:08:13