Mitsubishi Electric CITY MULTI PEFY-P-VMH-E2 User manual
2
VG79D859H01
▌①[ON/OFF] button
Press to turn ON/OFF the indoor unit.
▌②[SELECT] button
Press to save the setting.
▌③[RETURN] button
Press to return to the previous screen.
▌④[MENU] button
Press to bring up the Main menu.
▌⑤Backlit LCD
Operation settings will appear.
[ON/OFF] button)
▌⑥ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while the
remote controller is starting up or when there is an error.
The functions of the function buttons change depending on the screen.
Refer to the button function guide that appears at the bottom of the LCD for
the functions they serve on a given screen.
When the system is centrally controlled, the button function guide that
corresponds to the locked button will not appear.
Main display Main menu
Cursor Page
Menu screen
▌⑦Function button [F1]
▌⑧Function button [F2]
▌⑨Function button [F3]
▌⑩Function button [F4]
⑦⑧⑨⑩
⑦⑧⑨⑩⑦⑧⑨⑩
Function guide
en Wired remote controller
Controller interface
Function buttons
⑤
⑥
①②③④
⑦ ⑧ ⑨ ⑩
3
VG79D859H01
en
Display
▌Full mode ▌Basic mode
*
②
⑤
㉑
③
④
⑲
⑳
⑪
⑫㉓ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱
⑩
⑧
⑦
⑨
⑥
㉒
①
①
㉒
㉓②
③
④
⑤
▌①Operation mode
▌②Preset temperature
▌③Clock
See the Installation Manual.
▌④Fan speed
▌⑤Button function guide
▌⑥
▌⑦
▌⑧
▌⑨
▌⑩
▌⑪Room temperature
See the Installation Manual.
▌⑫
Appears when the buttons are locked.
▌⑬
enabled.
▌⑭
▌⑮
▌⑯
Appears while the outdoor units are operated in the silent mode.
▌⑰
⑪).
appears when the thermistor on the indoor unit is activated to monitor the
room temperature.
▌⑱
Indicates the vane setting.
▌⑲
Indicates the louver setting.
▌⑳
Indicates the ventilation setting.
▌㉑
Appears when the preset temperature range is restricted.
▌㉒Centrally controlled
operated.
▌㉓Preliminary error display
4
VG79D859H01
1. Safety precautions
Before operating the unit, make sure you read all the “Safety
precautions”.
“Safety precautions” lists important points about safety. Please be
sure to follow them.
Symbols used in the text
Warning:
Describes precautions that should be observed to avoid the risk of injury or
death to the user.
Caution:
Describes precautions that should be observed to prevent damage to the
unit.
Symbols used in the illustrations
Indicates an action that must be avoided.
Indicates a part which must be grounded.
Warning:
Carefully read the labels affixed to the main unit.
1.1. Installation
After you have read this manual, keep it and the Installation Manual in a
safe place for easy reference whenever a question arises. If the unit is
going to be operated by another person, make sure that this manual is
given to him or her.
Warning:
• The unit should not be installed by the user. Ask the dealer or an
authorized company to install the unit. If the unit is installed improperly,
water leakage, electric shock or fire may result.
• Use only accessories authorized by Mitsubishi Electric and ask your
dealer or an authorized company to install them. If accessories are
installed improperly, water leakage, electric shock or fire may result.
• The Installation Manual details the suggested installation method. Any
structural alteration necessary for installation must comply with local
building code requirements.
• Never repair the unit or transfer it to another site by yourself. If repair is
performed improperly, water leakage, electric shock or fire may result. If
you need to have the unit repaired or moved, consult your dealer.
• Keep the electric parts away from water (washing water) etc.
• It might result in electric shock, catching fire or smoke.
Note 1: When washing the Heat Exchanger and Drain Pan, ensure the
Control Box, Motor and LEV remain dry, using a water proof
covering.
Note 2: Never drain the washing water for the Drain Pan and the Heat
Exchanger using the Drain Pump. Drain separately.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• This appliance is intended to be used by expert or trained users in shops,
in light industry and on farms, or for commercial use by lay persons.
• Do not use a leak detection additive.
• Do not use refrigerant other than the type indicated in the manuals
provided with the unit and on the nameplate.
1)Outdoor unit
Warning:
• The outdoor unit must be installed on a stable, level surface, in a place
where there is no accumulation of snow, leaves or rubbish.
• Do not stand on, or place any items on the unit. You may fall down or the
item may fall, causing injury.
Caution:
• The outdoor unit should be installed in a location where air and noise
emitted by the unit will not disturb the neighbours.
2)Indoor unit
Warning:
• The indoor unit should be securely installed. If the unit is loosely
mounted, it may fall, causing injury.
Caution:
[PFFY-P-VCM-E series]
• Although the heat exchanger is coated with hydrophilic coating, sprays or
detergents with volatile organic compounds (VOC) or water-repellant
components may cause the heat exchanger fins to repel water.
When the unit with such fins is operated in a high-temperature and
high-humidity environment, condensation water on the fins may drip from
the unit.
3)Remote controller
Warning:
• The remote controller should be installed in such a way that children
cannot play with it.
4)Drain hose
Caution:
• Make sure that the drain hose is installed so that drainage can go ahead
smoothly. Incorrect installation may result in water leakage, causing
damage to furniture.
5)Power line, fuse or circuit breaker
Warning:
• Make sure that the unit is powered by a dedicated supply. Other
appliances connected to the same supply could cause an overload.
• Make sure that there is a main power switch.
• Be sure to adhere to the unit’s voltage and fuse or circuit breaker ratings.
Never use a piece of wire or a fuse with a higher rating than the one
specified.
6)Grounding
Caution:
• The unit must be properly grounded. Never connect the grounding wire to
a gas pipe, water pipe, lightning conductor or telephone grounding wire. If
the unit is not grounded properly, electric shock may result.
• Check frequently that the ground wire from the outdoor unit is properly
connected to both the unit’s ground terminal and the grounding electrode.
1.2. During operation
Warning:
• Do not splash water over the unit and do not touch the unit with wet
hands. An electric shock may result.
• Do not spray combustible gas close to the unit. Fire may result.
• Do not place a gas heater or any other open-flame appliance where it will
be exposed to the air discharged from the unit. Incomplete combustion
may result.
• Do not remove the front panel or the fan guard from the outdoor unit when
it is running. You could be injured if you touch rotating, hot or high-
voltage parts.
• Never insert fingers, sticks etc. into the intakes or outlets, otherwise injury
may result, since the fan inside the unit rotates at high speed. Exercise
particular care when children are present.
Contents
.....................................................................................4
1.1. Installation.........................................................................................4
1.2. During operation ...............................................................................4
.........................................................................5
.......................................................5
3. How to operate..........................................................................................6
3.1. Turning ON/OFF...............................................................................6
3.2. Operation mode................................................................................6
3.3. Set temperature................................................................................7
3.4. Fan speed.........................................................................................7
................................................................................8
..............................................................................8
6. Troubleshooting.........................................................................................9
.........................................10
..........................................................................................11
5
VG79D859H01
en
• If you detect odd smells, stop using the unit, turn off the power switch and
consult your dealer. Otherwise, a breakdown, electric shock or fire may
result.
• When you notice exceptionally abnormal noise or vibration, stop
operation, turn off the power switch, and contact your dealer.
• Do not over-cool. The most suitable inside temperature is one that is
within 5 °C of the outside temperature.
• Do not leave handicapped people or infants sitting or standing in the path
of the airflow from the air-conditioner. This could cause health problems.
Caution:
• Do not use any sharp object to push the buttons, as this may damage the
remote controller.
• Do not twist or tug on the remote controller cord as this may damage the
remote controller and cause malfunction.
• Never remove the upper case of the remote controller. It is dangerous to
remove the upper case of the remote controller and touch the printed
circuit boards inside. Doing so can result in fire and failure.
• Never wipe the remote controller with benzene, thinner, chemical rags, etc.
Doing so can result in discoloration and failure. To remove heavy stains,
soak a cloth in neutral detergent mixed with water, wring it out thoroughly,
wipe the stains off, and wipe again with a dry cloth.
• Never block or cover the indoor or outdoor unit’s intakes or outlets. Tall
items of furniture underneath the indoor unit, or bulky items such as large
boxes placed close to the outdoor unit will reduce the unit’s efficiency.
• Do not direct the airflow at plants or caged pets.
• Ventilate the room frequently. If the unit is operated continuously in a
closed room for a long period of time, the air will become stale.
In case of failure
Warning:
• Never remodel the air conditioner. Consult your dealer for any repair or
service. Improper repair work can result in water leakage, electric shock,
fire, etc.
• If the remote controller displays an error indication, the air conditioner
does not run, or there is any abnormality, stop operation and contact your
dealer. Leaving the unit as it is under such conditions can result in fire or
failure.
• If the power breaker is frequently activated, get in touch with your dealer.
Leaving it as it is can result in fire or failure.
• If the refrigeration gas blows out or leaks, stop the operation of the air
conditioner, thoroughly ventilate the room, and contact your dealer.
Leaving the unit as it is can result in accidents due to oxygen deficiency.
When the air conditioner is not to be used for a long time
• If the air conditioner is not to be used for a long time due to a seasonal
change, etc., run it for 4 - 5 hours with the air blowing until the inside is
completely dry. Failing to do so can result in the growth of unhygienic,
unhealthy mold in scattered areas throughout the room.
• When it is not to be used for an extended time, keep the power supply
turned OFF. If the power supply is kept on, several watts or several tens of
watts will be wasted. Also, the accumulation of dust, etc., can result in fire.
• Keep the power switched ON for more than 12 hours before starting
operation. Do not turn the power supply OFF during seasons of heavy use.
Doing so can result in failure.
1.3. Disposing of the unit
Warning:
• When you need to dispose of the unit, consult your dealer. If pipes are
removed incorrectly, refrigerant (fluorocarbon gas) may blow out and
come into contact with your skin, causing injury. Releasing refrigerant into
the atmosphere also damages the environment.
2. Names and functions of various parts
Attachment and detachment of filter
Ⓐ
Ⓐ
Ⓐ
Ⓐ
①Air inlet at the bottom ② ⒶFilter
Caution:
• In removing the filter, precautions must be taken to protect your eyes from
dust. Also, if you have to climb up on a stool to do the job, be careful not
to fall.
• Turn off the power supply when the filter is changed.
① ②
6
VG79D859H01
3. How to operate
3.1. Turning ON/OFF
ON
Press the [ON/OFF] button.
the operation will start.
*
OFF
Press the [ON/OFF] button again.
operation will stop.
3.2. Operation mode
Press the [F1] button to go through the
Select the desired operation mode.
*
the connected indoor unit will not appear on
*
What the blinking mode icon means
The mode icon will blink when other indoor units in the same
Dry mode
speed.
1.
2.
Heat mode
“DEFROST” display
“STAND BY” display
Caution:
• Never expose your body directly to cool air for a long time. Excessive
exposure to cool air is bad for your health, and should therefore be
avoided.
• When the air-conditioner is used together with burners, thoroughly
ventilate the area. Insufficient ventilation can result in accidents due to
oxygen deficiency.
• Never place a burner at a place where it is exposed to the airflow from the
air-conditioner. Doing so can result in imperfect combustion of the burner.
• The microcomputer functions in the following cases:
Air does not blow out when heating starts.
Auto (dual set point) mode
heating mode and keep the room temperature within the preset range.
AutoFan
Heat
temperature
The room temperature
changes corresponding
to the change in the
outside temperature.
Heat
Set temp.
Heat
Set temp.
7
VG79D859H01
en
3.3. Set temperature
Press the [F2] button to decrease the set
increase.
*
modes.
*
mode.
*
The current set temperatures will appear.
Settings screen.
Set temperature range
Operation mode Set temperature range
*1
Heat *1
Auto
*1*2
Auto
mode
mode *2*3*4
Fan Not settable
*1
*2
appear depending on the indoor unit model.
*3
*4
conditions.
unit model.
3.4. Fan speed
[PEFY-P-VMH-E2 series]
[PEFY-P-VMHS-E, PEFY-P-VMS1(L)-E, PFFY-P-VCM-E series]
*1
*1
1.
2. When the room temperature is higher than the set temperature during the
heating mode
3.
operation mode)
4.
Auto
8
VG79D859H01
4. The smart way to use
Even minimal steps to care for your air conditioner can help make its use far
more effective in terms of air-conditioning effect, electricity charges, etc.
Set the right room temperature
and outdoors is optimum.
electric power can be saved.
Clean the filter thoroughly
Prevent intrusion of heat during air-cooling
Carry out ventilation sometimes
5. Caring for the machine
Always have filter maintenance performed by a service person. Before
care-taking, turn the power supply OFF.
Caution:
• Before you start cleaning, stop operation and turn OFF the power supply.
Remember that the fan is rotating inside at high speed, posing a serious
risk of injury.
• Indoor units are equipped with filters to remove the dust of sucked-in air.
Clean the filters following the procedures on the right. (The standard filter
should normally be cleaned once a week, and the long-life filter at the
beginning of each season.)
• The life of the filter depends on where the unit is installed and how it is
operated.
How to clean
Caution:
• Do not dry the filter by exposing it to direct sunlight or warming it using
fire, etc. Doing so can result in the deformation of the filter.
• Washing it in hot water (more than 50°C) can also result in deformation.
• Never pour water or flammable sprays onto the air conditioner. Cleaning
using these methods can result in the failure of the air conditioner, electric
shock, or fire.
9
VG79D859H01
en
6. Troubleshooting
When an error occurs, the following screen will appear and the operation LED will
blink. Check the error status, stop the operation, and consult your dealer.
Before you ask for repair service, check the following points:
Troubleshooting
It does not run.
the [ON/OFF] button is pressed.
The earth leakage breaker is gone. Put in the earth leakage breaker.
not cool enough or heat
enough.
Improper temperature adjustment
adjustment button.
There are some obstacles at the air inlet
Windows and doors are open.
not come out.
that it is in operation.
there are occasions sometimes when the compressor
Indoor unit operation was restarted during
operation.)
stops.
There are some obstacles at the air inlet
line and clock.
Fri
When other indoor units are engaged in
stopped.
motor can be heard
running.
line and clock.
Fri
When other indoor units are engaged in
operation.
Warm air comes out
thermostat is OFF or
When other indoor units are engaged in
press the [ON/OFF] button again and start operation.
10
VG79D859H01
The following symptoms are not air conditioner failures:
This is normal.
change. This is normal.
7. Installation, transferring works, and checking
Regarding place for installation
Caution:
• Never install the air conditioner where there is a risk of leakage of
flammable gas. If gas leaks and accumulates around the unit, fire can
result.
• Never install the air conditioner at the following place:
near the ocean and beach areas where there is salt air.
where there is sulphurous gas
• Install the indoor unit horizontally. Otherwise, water leakage can result.
• Take sufficient measures against noise when installing the air
conditioners at hospitals or communication-related businesses.
Regarding electrical work
Caution:
• The electrical work must be undertaken by a person who is qualified as an
electrical engineer according to the [technical standard respecting
electrical installation], [internal wiring rules], and the installation
instruction manual with the absolute use of exclusive circuits. The use of
other products with the power source can result in burnt-out beakers and
fuses.
• Never connect the grounding wire to a gas pipe, water pipe, arrester, or
telephone grounding wire. For details, consult with your dealer.
• In some types of installation sites, the installation of an earth leakage
breaker is mandatory. For details, consult with your dealer.
Regarding transfer of installation
installation.
Caution:
• When moving or reinstalling the air conditioner, consult with your dealer.
Defective installation can result in electric shock, fire, etc.
Regarding noise
obstacles adjacent to the air outlet.
Maintenance and inspection
11
VG79D859H01
en
8. Specifications
PEFY-P-VMH-E2 series
Power source
*1 *1 kW 4.5/5.0 5.6/6.3 7.1/8.0 8.0/9.0 9.0/10.0
mm 380/745/900 380/745/900 380/745/900 380/1030/900 380/1030/900
Net weight kg 42 42 43 57 57
Fan m3/min
*2 Pa 220 V 50/100/200 50/100/200 50/100/200 50/100/200 50/100/200
100/150/200 100/150/200 100/150/200 100/150/200 100/150/200
Sound pressure level
*5 220 V
Filter
Power source
*1 *1 kW 11.2/12.5 14.0/16.0 16.0/18.0
mm 380/1195/900 380/1195/900 380/1195/900
Net weight kg 66 66 68
Fan m3/min
*2 Pa 220 V 50/100/200 50/100/200 50/100/200
100/150/200 100/150/200 100/150/200
Sound pressure level
*5 220 V
Filter
PEFY-P-VMS1(L)-E series
Power source
*1 *1 kW 1.7/1.9 2.2/2.5 2.8/3.2 3.6/4.0
mm 200/700/700 200/700/700 200/700/700 200/700/700
Net weight kg
Fan
m3/min
*3 Pa 5/15/35/50 5/15/35/50 5/15/35/50 5/15/35/50
Sound pressure level
*3 *5
Filter
Power source
*1 *1 kW 4.5/5.0 5.6/6.3 7.1/8.0
mm 200/900/700 200/900/700 200/1100/700
Net weight kg
Fan
m3/min
*3 Pa 5/15/35/50 5/15/35/50 5/15/35/50
Sound pressure level
*3 *5
Filter
*
*1
*2
*3
*4
*5 The operating noise is the data that was obtained in an anechoic room.
12
VG79D859H01
PEFY-P-VMHS-E series
Power source
*1 *1 kW 4.5/5.0 5.6/6.3 7.1/8.0 8.0/9.0 9.0/10.0
mm 380/745/900 380/745/900 380/745/900 380/1030/900 380/1030/900
Net weight kg 35 35 35 45 45
Fan
m3/min
pressure*4 Pa 50/100/150/200 50/100/150/200 50/100/150/200 50/100/150/200 50/100/150/200
Sound pressure level
*3
Filter
Power source
*1 *1 kW 11.2/12.5 14.0/16.0 16.0/18.0
mm 380/1195/900 380/1195/900 380/1195/900
Net weight kg 51 51 53
Fan
m3/min
pressure*4 Pa 50/100/150/200 50/100/150/200 50/100/150/200
Sound pressure level
*3
Filter
*
*1
*2
*3 The operating noise is the data that was obtained in an anechoic room.
*4
PFFY-P-VCM-E series
Power source
*1*1 kW 2.2/2.5 2.8/3.2 3.6/4.0 4.5/5.0
mm 615/700/200 615/700/200 615/700/200 615/900/200
Net weight kg 18 18 18.5 21.5
Fan
m3/min
pressure *2 Pa 0/10/40/60 0/10/40/60 0/10/40/60 0/10/40/60
Sound pressure level *3
Filter
Power source
*1*1 kW 5.6/6.3 7.1/8.0
mm 615/900/200 615/1100/200
Net weight kg 21.5 25.5
Fan
m3/min
pressure *2 Pa 0/10/40/60 0/10/40/60
Sound pressure level *3
Filter
*
*1
*2
*3 The operating noise is the data that was obtained in an anechoic room.
13
VG79D859H01
en
Product Information
ⒶModel
Ⓑ Ⓔ ⒻTotal electric power
elec
Ⓖ
WA
ⒸSensible P Ⓓ P
1.60 0.10 1.90 0.050 49 46 46
1.90 0.30 2.50 0.050 49 47 46
2.20 0.60 3.20 0.060 50 48 47
2.70 0.90 4.00 0.070 52 49 48
3.20 1.30 5.00 0.070 53 51 50
4.00 1.60 6.30 0.090 56 54 53
5.00 2.10 8.00 0.090 57 55 54
1.60 0.10 1.90 0.030 49 46 46
1.90 0.30 2.50 0.030 49 47 46
2.20 0.60 3.20 0.040 50 48 47
2.70 0.90 4.00 0.050 52 49 48
3.20 1.30 5.00 0.050 53 51 50
4.00 1.60 6.30 0.070 56 54 53
5.00 2.10 8.00 0.070 57 55 54
3.60 0.90 5.00 0.190 57 52
4.10 1.50 6.30 0.190 58 53
5.10 2.00 8.00 0.240 62 58
6.10 1.90 9.00 0.260 62 57
6.90 2.10 10.00 0.320 64 60
9.20 2.00 12.50 0.480 65 61
10.30 3.70 16.00 0.480 65 62
11.50 4.50 18.00 0.480 65 62
3.60 0.90 5.00 0.055 50 48 48
4.10 1.50 6.30 0.055 51 50 50
5.10 2.00 8.00 0.090 55 54 53
6.10 1.90 9.00 0.075 55 55 54
6.90 2.10 10.00 0.090 56 56 55
9.20 2.00 12.50 0.160 59 58 58
10.30 3.70 16.00 0.160 61 60 60
11.50 4.50 18.00 0.190 62 61 61
1.70 0.50 2.50 0.022 46 44 43
1.90 0.90 3.20 0.026 49 46 44
2.40 1.20 4.00 0.031 50 48 46
3.30 1.20 5.00 0.038 50 48 47
4.00 1.60 6.30 0.053 54 51 50
5.00 2.10 8.00 0.058 55 53 52
Deutsch
Français Polski
Nederlands Malti
Suomi Hrvatski
Italiano Norsk
Türkçe
Português
Dansk
Svenska
Ⓐ
Modell Mudel
modèle Model Modelis
model Mudell Modelis
modelo Malli Model
modello Model Modell
Model Model
Modelo Modell
Model Model
Modell Model
Ⓑ
Jahutusvõimsus
Zmogljivost hlajenja
14
VG79D859H01
Ⓒ
sensibel tajutav
sensible jawna
waarneembaar sensittiva juntamojo
sensible tuntuva osjetni
sensibile
sensibel
kännbar
Ⓓ
latent latentne
latente utajona
latent latenti slaptojo
latente latentti latentni
latente
latente latens
latent latentno
latent
Ⓔ
Wärmeleistung
Verwarmingsvermogen
Varmekapasitet
Potência de aquecimento
Zmogljivost ogrevanja
Uppvärmningskapacitet
Ⓕ
Totaal elektrisch ingangsvermogen
Sähkön kokonaisottoteho
Ⓖ
Schallleistungspegel
Müravõimsustase
Niveau de puissance acoustique
Geluidsvermogensniveau
Nivel de potencia acústica
Äänitehotaso
göre)
15
VG79D859H01
en
MITSUBISHI ELECTRIC CONSUMER PRODUCTS (THAILAND) CO., LTD.
700/406 MOO 7, TAMBON DON HUA ROH, AMPHUR MUANG, CHONBURI 20000, THAILAND
MADE IN THAILAND
MITSUBISHI ELECTRIC, PEFY-P15VMS1-E*, PEFY-P20VMS1-E*, PEFY-P25VMS1-E*, PEFY-P32VMS1-E*, PEFY-P40VMS1-E*, PEFY-P50VMS1-E*, PEFY-P63VMS1-E*
PEFY-P15VMS1L-E*, PEFY-P20VMS1L-E*, PEFY-P25VMS1L-E*, PEFY-P32VMS1L-E*, PEFY-P40VMS1L-E*, PEFY-P50VMS1L-E*, PEFY-P63VMS1L-E*
PEFY-P40VMH-E2*, PEFY-P50VMH-E2*, PEFY-P63VMH-E2*, PEFY-P71VMH-E2*, PEFY-P80VMH-E2*, PEFY-P100VMH-E2*, PEFY-P125VMH-E2*,
PEFY-P140VMH-E2*
PEFY-P40VMHS-E*, PEFY-P50VMHS-E*, PEFY-P63VMHS-E*, PEFY-P71VMHS-E*, PEFY-P80VMHS-E*, PEFY-P100VMHS-E*, PEFY-P125VMHS-E*,
PEFY-P140VMHS-E*
PFFY-P20VCM-E*, PFFY-P25VCM-E*, PFFY-P32VCM-E*, PFFY-P40VCM-E*, PFFY-P50VCM-E*, PFFY-P63VCM-E*
* : , , 1, 2, 3, · · · , 9
Directives
Directives
Directivas
Direttive
Directivas
Direktiv
Smernice
Direktive
Direktive
Directive
Direktiver
Direktiver
2014/35/EU: Low Voltage
2006/42/EC: Machinery
2014/30/EU: Electromagnetic Compatibility
16
VG79D859H01
idioma original.
CAUTION
CUIDADO
originalet.
VORSICHT
FÖRSIKTIGHET
eller köldskador.
PRECAUTION
avaler par accident.
DİKKAT
VOORZICHTIG
Isoleer de leidingen met isolatiemateriaal. Direct contact met de onbedekte leidingen kan
Stop nooit batterijen in uw mond om inslikking te voorkomen.
ОСТОРОЖНО
son traducciones del original.
CUIDADO UPOZORNĚNÍ
ATTENZIONE
Accertarsidiapplicarematerialeisolanteintornoalletubature.Ilcontattodirettoconletubature
non schermate può provocare ustioni o congelamento.
Non introdurre in nessun caso le batterie nella bocca onde evitare ingestioni accidentali.
UPOZORNENIE
ΠΡΟΣΟΧΗ
POZOR
delovanjem.
17
VG79D859H01
en
FIGYELMEZTETÉS
PRZESTROGA
OPREZ
ВНИМАНИЕ
traduceri ale originalului.
ATENŢIE
originalversionen. FORSIGTIG
Forsiktig
Please be sure to put the contact address/telephone number
VG79D859H01_en
Other manuals for CITY MULTI PEFY-P-VMH-E2
1
This manual suits for next models
4
Table of contents
Other Mitsubishi Electric Air Conditioner manuals
Mitsubishi Electric
Mitsubishi Electric PEFY-P-VML-E Product guide
Mitsubishi Electric
Mitsubishi Electric MFZ-KJ25VE-E2 User manual
Mitsubishi Electric
Mitsubishi Electric MS-CP18VA User manual
Mitsubishi Electric
Mitsubishi Electric ecodan EHSC-VM2B User manual
Mitsubishi Electric
Mitsubishi Electric Lossnay LGH-25RX5 User manual
Mitsubishi Electric
Mitsubishi Electric City Multi PUHY-P250YNW-A How to use
Mitsubishi Electric
Mitsubishi Electric Mr. SLIM SLZ-M FA Series User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-AP20VG User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-FD25VA User manual
Mitsubishi Electric
Mitsubishi Electric MS-GA50VB User manual
Mitsubishi Electric
Mitsubishi Electric Mr. Slim MSZ-GE06NA User manual
Mitsubishi Electric
Mitsubishi Electric Mr.Slim PKA-M-LA Series User manual
Mitsubishi Electric
Mitsubishi Electric Mr.Slim PEAD-RP35JAQ User manual
Mitsubishi Electric
Mitsubishi Electric Mr.Slim PUHZ-P100VHA2 User manual
Mitsubishi Electric
Mitsubishi Electric PLA-RP.BA Series Instruction manual
Mitsubishi Electric
Mitsubishi Electric MLZ-KP09NA2 User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-HC25VA User manual
Mitsubishi Electric
Mitsubishi Electric Mr.SLIM MSY-JP09VF User manual
Mitsubishi Electric
Mitsubishi Electric MCF-GA35VB User manual
Mitsubishi Electric
Mitsubishi Electric PEAD-A24AA4 User manual
