Mitsubishi Electric FDF71VNXVD User manual

HYPER INVERTER PACKAGED AIR-CONDITIONERS
(Split system, Air to air heat pump type)
Manual No. '11
• PAC-T-160
THCHNICAL MANUAL
FLOOR STANDING TYPE
●
Single phase use
FDF71VNXVD
100VNXVD
125VNXVD
140VNXVD
●
3 phase use
FDF100VSXVD
125VSXVD
140VSXVD
MICRO INVERTER PACKAGED AIR-CONDITIONERS
(Split system, Air to air heat pump type)
●
Single phase use
FDF140VNXPVD
●
3 phase use
FDF140VSXPVD
Single type
Twin type
FLOOR STANDING TYPE
●
Single phase use
FDF100VNVD
125VNVD
140VNVD
●
3 phase use
FDF100VSVD
125VSVD
140VSVD
●
Single phase use
FDF140VNPVD
●
3 phase use
FDF140VSPVD
200VSPVD
250VSPVD
Single type
Twin type
125VSXVD
INVERTER DRIVEN MULTI-INDOOR-UNIT
CLIMATE CONTROL SYSTEM
Air-Conditioning & Refrigeration Systems Headquarters
16-5, 2-chome, Kounan, Minato-ku, Tokyo, 108-8215, Japan
Fax : [phone]
No.108 R
Because of our policy of continuous improvement, we reserve the right to make changes in all specifications without notice.
updated August 01 ,2013
TECHNICAL MANUAL

-
1
-
'11 • PAC-T-160
CONTENTS
1. SPECIFICATIONS ........................................................................................... 3
(1) Hyper inverter series
(2) Micro inverter series
2. EXTERIOR DIMENSIONS ...............................................................................22
(1) Indoor units ..................................................................................................22
................................................................................... 3
....................................................................................12
(2) Outdoor units ...............................................................................................23
4. NOISE LEVEL
6. PIPING SYSTEM
5. TEMPERATURE DISTRIBUTION
3. ELECTRICAL WIRING ....................................................................................28
7. RANGE OF USAGE & LIMITATIONS
(1) Indoor units ..................................................................................................28
(2) Outdoor units ...............................................................................................29
8. SELECTION CHART
8.1 Capacity tables
8.2 Correction of cooling and heating capacity in relation to air flow rate control (fan speed)
8.3 Correction of cooling and heating capacity in relation to one way length of refrigerant piping
8.4 Height difference between the indoor unit and outdoor unit
9. APPLICATION DATA
...........................................................................56
......................................................................................56
.................................................................60
...........................................................................................44
.............54
........54
..................55
.................................................................................................35
....................................................................37
.............................................................................................38
..............................................................41
.......................................................................................44
9.1 Installation of indoor unit
9.2 Electric wiring work instruction
9.3 Installation of outdoor unit ........................................................................64
(1) Model FDC71VNX .......................................................................................64
(2) Models FDC100～140VN,100～140VS,100～140VNX,100～140VSX .......72
(3) Models FDC200,250VS .............................................................................76
(4) Method for connecting the accessory pipe (Models FDC200,250 only) ........83
9.4 Instructions for branching pipe set (DIS-WA1,WB1,TA1,TB1) ................85

-
2
-
'11 • PAC-T-160
10. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER ................. 87
11. MAINTENANCE DATA ..................................................................................120
..............................................................................148
11.1 Diagnosing of microcomputer circuit ...................................................120
(1) Remote controller ......................................................................................... 87
................................................................................ 99
(2) Operation control function by the remote controller
(4) Operation control function by the outdoor controller ..................................... 99
(Ⅰ) Micro inverter series
...............................................................................110(Ⅱ) Hyper inverter series
(3) Operation control function by the indoor controller ....................................... 89
..................................... 88
(1) Selfdiagnosis function ...............................................................................120
(2) Troubleshooting procedure ........................................................................123
(4) Troubleshooting at the outdoor unit ...........................................................126
(3) Troubleshooting at the indoor unit .............................................................123
(5) Check of anomalous operation data with the remote controller ................139
(7) Inverter checker for diagnosis of inverter output .......................................141
(6) Power transistor module (including the driver PCB) inspection procedure ...........140
11.2 Troubleshooting flow
(8) Outdoor unit controller failure diagnosis circuit diagram ....................................142
How to read the model name
FDF : Floor standing type
Example: FDF 140 VNX P VD
Series code
P : Twin type
: Single type
Applicable power source...See the specification
Product capacity (14.0KW at cooling)
Model name
FDC : Outdoor unit
(blank)
12. OPTION PARTS ............................................................................................197
(1) Wireless kit (RCN-KIT3-E) ........................................................................197
(2) Simple wired remote conroller (RCH-E3) .................................................199
(3) Base heater kit (CW-H-E) .........................................................................205

-
3
-
'11 • PAC-T-160
1. SPECIFICATIONS
(1) Hyper inverter series
(a) Single phase use
1) Single type
PGA000Z780
Adapted to RoHS directive
FDF71VNXVD
Indoor unit FDF71VD Outdoor unit FDC71VNX
Power source 220-240V~50Hz / 220V~60Hz
Operation data Cooling Heating
Nominal capacity kW 7.1 [ 3.2 (Min.)~8.0 (Max.)] 8.0 [ 3.6 (Min.)~9.0 (Max.)]
Power consumption kW 2.21 2.21
Running current A 9.8 / 10.3 9.9 / 10.4
Power factor ％98 97
Inrush current A 5 < Max.running current 17 >
Sound Pressure Level dB(A)
P-Hi : 42 Hi : 39 Me : 35 Lo : 33 Cooling : 51, Heating : 48
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1 ) near equivalent
Net weight kg 49 60
Refrigerant equipment
Compressor type & Q'ty —RMT5118MDE2 × 1
Starting method —Direct line start
Refrigerant oil ・—0.675 (M-MA68)
Heat exchanger Louver fine & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 1
Motor <Starting method> W 157 < Direct line start > 86 < Direct line start >
Air flow(Standard) CMM P-Hi : 20 Hi : 18 Me : 16 Lo : 14 Cooling : 60, Heating : 50
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W — 20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length Max.50m
Vertical height difference between
outdoor unit and indoor unit
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
Refrigerant Quantity R410A 2.95kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump — —
Drain Hose Connectable with VP20
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit —
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 230V50Hz or 220V60Hz.
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
Model
Item
mm
mm
See page 43
1,850 × 600 × 320 750×880 (+88) × 340
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item Outdoor air temperature
Holes size φ20 × 3pcs
Liquid line: I/Uφ9.52 (3/8") Pipeφ9.52 (3/8") × 0.8 O/U 9.52 (3/8")
Gas line: φ15.88 (5/8") φ15.88 (5/8") × 1.0 φ15.88 (5/8")

-
4
-
'11 • PAC-T-160
PGA000Z780
Adapted to RoHS directive
FDF100VNXVD
Indoor unit FDF100VD Outdoor unit FDC100VNX
Power source 220-240V~50Hz / 220V~60Hz
Operation data Cooling Heating
Nominal capacity kW 10.0 [ 4.0 (Min.)~11.2 (Max.)] 11.2 [ 4.0 (Min.)~12.5 (Max.)]
Power consumption kW 2.83 3.04
Running current A 12.6 / 13.1 13.5 / 14.1
Power factor ％98 98
Inrush current A 5 < Max.running current 24 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 Cooling : 48 Heating : 50
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 52 105
Refrigerant equipment
Compressor type & Q'ty —RMT5134MDE2 × 1
Starting method —Direct line start
Refrigerant oil ・—0.9 M-MA68
Heat exchanger Louver fine & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 × 2 < Direct line start >
Air flow (Standard) CMM P-Hi : 29 Hi : 26 Me : 23 Lo : 19 100
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W —20 (Crank case heater)
Remote controller RC-E4 Installed /wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length Max.100m
Vertical height difference between
outdoor unit and indoor unit
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
Refrigerant Quantity R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump — —
Drain Hose Connectable with VP20
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 230V50Hz or 220V60Hz.
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
mm
Model
Item
mm 1,850 × 600 × 320 1,300 × 970 × 370
See page 43
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item Outdoor air temperature
Gas line: φ15.88 (5/8") φ15.88 (5/8") × 1.0 φ15.88 (5/8")
Liquid line: I/Uφ9.52 (3/8") Pipeφ9.52 (3/8") × 0.8 O/Uφ9.52 (3/8")
Holes size φ20 × 3pcs

-
5
-
'11 • PAC-T-160
FDF125VNXVD
Indoor unit FDF125VD Outdoor unit FDC125VNX
Power source 220-240V~50Hz / 220V~60Hz
Operation data Cooling Heating
Nominal capacity kW 12.5 [ 5.0 (Min.)~14.0 (Max.)] 14.0 [ 4.0 (Min.)~17.0 (Max.)]
Power consumption kW 3.89 3.88
Running current A 17.3 / 18.0 17.2 / 18.0
Power factor ％98 98
Inrush current A 5 < Max.running current 26 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 Cooling : 48 Heating : 50
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color ) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 52 105
Refrigerant equipment
Compressor type & Q'ty —RMT5134MDE2 × 1
Starting method —Direct line start
Refrigerant oil ・—0.9 M-MA68
Heat exchanger Louver fine & inner grooved tubing
M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 x 2 < Direct line start >
Air flow(Standard) CMM P-Hi：29 Hi：26 Me：23 Lo：19 100
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W —20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump — —
Drain
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 230V50Hz or 220V60Hz.
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
Model
Item
mm 1,850 × 600 × 320 1,300 × 970 × 370
mm
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
Hose Connectable with VP20
See page 43
Max.100m
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item Outdoor air temperature
Gas line: φ15.88 (5/8") φ15.88(5/8") × 1.0 φ15.88 (5/8")
Liquid line: I/Uφ9.52 (3/8") Pipeφ9.52(3/8") × 0.8 O/U 9.52 (3/8")
Holes size φ20 × 3pcs
Adapted to RoHS directive
PGA000Z780

-
6
-
'11 • PAC-T-160
Indoor unit FDF140VD
FDF140VNXVD
Outdoor unit FDC140VNX
Power source 220-240V~50Hz / 220V~60Hz
Operation data Cooling Heating
Nominal capacity kW 14.0 [ 5.0 (Min.)~16.0 (Max.)] 16.0 [ 4.0 (Min.)~18.0 (Max.)]
Power consumption kW 4.65 4.69
Running current A 20.6 / 21.6 20.8 / 21.8
Power factor ％98 98
Inrush current A 5 < Max.running current 24 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 Cooling : 49 Heating : 52
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 52 105
Refrigerant equipment
Compressor type & Q'ty —RMT5134MDE2 × 1
Starting method —Direct line start
Refrigerant oil ・—0.9 M-MA68
Heat exchanger
Louver fine & inner grooved tubing
M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 × 2 < Direct line start >
Air flow(Standard) CMM P-Hi : 29 Hi : 26 Me : 23 Lo : 19 100
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W —20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump — —
Drain
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.ner is operated at 230V50Hz or 220V60Hz.
(4) The operation data indicates when the air-conditio
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
Item
mm 1,850 × 600 × 320 1,300 × 970 × 370
mm
Hose Connectable with VP20
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
See page 43
Max.100m
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item
Outdoor air temperature
Model
Adapted to RoHS directive
Holes size φ20 × 3pcs
Liquid line: I/Uφ9.52 (3/8") Pipeφ9.52 (3/8") × 0.8 O/Uφ9.52 (3/8")
Gas line: φ15.88 (5/8") φ15.88 (5/8") × 1.0 φ15.88 (5/8")
PGA000Z780

-
7
-
'11 • PAC-T-160
Power source 220-240V~50Hz / 220V~60Hz
Operation data Cooling Heating
Nominal capacity kW 14.0 [ 5.0 (Min.) ~16.0 (Max.)] 16.0 [ 4.0 (Min.) ~18.0 (Max.)]
Power consumption kW 4.83 4.97
Running current A 21.4 / 22.4 22.0 / 23.1
Power factor ％98 98
Inrush current A 5 < Max.running current 26 >
Sound Pressure Level dB(A)
P-Hi : 42 Hi : 39 Me : 35 Lo : 33
Cooling
:
49 Heating
:
52
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 49 105
Refrigerant equipment
Compressor type & Q'ty —RMT5134MDE2 × 1
Starting method —Direct line start
Refrigerant oil ・—0.9 M-MA68
Heat exchanger Louver fine & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 x 2 < Direct line start >
Air flow (Standard) CMM P-Hi
: 18 Hi : 16 Me : 14 Lo : 12 100
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W —20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity R410A 4.5kg (Pre-charged up to the piping length of 30m) Outdoor unit
Drain pump — —
Drain
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 230V50Hz or 220V60Hz.
(5) Indoor unit specifications for one unit. Capacity and operation data is two indoor units are combined and run together.
(6) Branching pipe set "DIS-WA1" × 1 (option). ① : Pipe of O/U~Branch, ② : Pipe of Branch~I/U
(7) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
mm 1,850 × 600 × 320 1,300 × 970 × 370
mm
Adapted to RoHS directive
FDF140VNXPVD
Indoor unit FDF71VD (2 units) Outdoor unit FDC140VNX
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item
Outdoor air temperature
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
See page 43
Max.100m
Hose Connectable with VP20
Liquid line: I/Uφ9.52 (3/8") ②φ9.52 (3/8") × 0.8 ①φ9.52 (3/8") × 0.8 O/Uφ9.52 (3/8")
Gas line: I/Uφ15.88 (5/8") ②φ15.88 (5/8") × 1.0 ①φ15.88 (5/8") × 1.0 O/Uφ15.88 (5/8")
Model
Item
Holes size φ20 × 3pcs
PGA000Z780
2) Twin type

-
8
-
'11 • PAC-T-160
PGA000Z780
Operation data Cooling Heating
Nominal capacity kW 10.0 [ 4.0 (Min.)
~ 11.2 (Max.)] 11.2 [ 4.0 (Min.) ~ 16.0 (Max.)]
Power consumption kW 2.83 3.04
Running current A4.2 / 4.4 4.5 / 4.7
Power factor ％97 / 98 98
Inrush current A5 < Max.running current 15 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 Cooling : 48 Heating : 50
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 52 105
Refrigerant equipment
Compressor type & Q'ty —RMT5134MDE3 × 1
Starting method —Direct line start
Refrigerant oil ・—0.9 M-MA68
Heat exchanger Louver fine & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W157 < Direct line start > 86 × 2 < Direct line start >
Air flow(Standard) CMM P-Hi : 29 Hi : 26 Me : 23 Lo : 19 100
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W—20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity
R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump — —
Drain
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 400V50Hz or 380V60Hz.
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
mm 1,850 × 600 × 320 1,300 × 970 × 370
mm
Adapted to RoHS directive
FDF100VSXVD
Outdoor unit FDC100VSX
380-415V 3N~50Hz / 380V 3N~60Hz
Indoor unit FDF100VD
Max.100m
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
Hose Connectable with VP20 Holes size φ20 × 3pcs
See page 43
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item
Outdoor air temperature
Model
Item
Gas line: φ15.88 (5/8") φ15.88 (5/8") × 1.0 φ15.88 (5/8")
Liquid line: I/Uφ9.52 (3/8") Pipeφ9.52 (3/8") × 0.8 O/U 9.52 (3/8")
(b) 3 phase use
1) Single type

-
9
-
'11 • PAC-T-160
PGA000Z780
Nominal capacity kW 12.5 [ 5.0 (Min.)~14.0 (Max.)] 14.0 [ 4.0 (Min.)~18.0 (Max.)]
Power consumption kW 3.89 3.88
Running current A 5.7 / 6.0 5.7 / 6.0
Power factor ％99 98
Inrush current A 5 < Max.running current 15 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 Cooling : 48 Heating : 50
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 52 105
Refrigerant equipment
Compressor type & Q'ty —RMT5134MDE3 × 1
Starting method —Direct line start
Refrigerant oil ・—0.9 M-MA68
Heat exchanger Louver fine & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control —Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 × 2 < Direct line start >
Air flow(Standard) CMM P-Hi : 29 Hi : 26 Me : 23 Lo : 19 100
External static pressure Pa 0
Outside air intake Not possible —
—
Air filter, Q'ty Plastic net × 1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form —
Electric heater W —20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics —
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method Flare piping Flare piping
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump — —
Drain
Insulation for piping Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 400V50Hz or 380V60Hz.
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
mm 1,850 × 600 × 320 1,300 × 970 × 370
mm
Adapted to RoHS directive
FDF125VSXVD
Indoor unit FDF125VD Outdoor unit FDC125VSX
Power source 380-415V 3N~50Hz / 380V 3N~60Hz
Operation data Cooling Heating
Item
Max.100m
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
Hose Connectable with VP20 Holes size φ20 × 3pcs
See page 43
Indoor air temperature
Operation DB
27oC
20oC 7oC 6oC
19oC 35oC 24oC
WB DB WB
Cooling
Heating
Item
Outdoor air temperature
Model
Liquid line: I/Uφ9.52 (3/8") Pipeφ9.52 (3/8") × 0.8 O/U 9.52 (3/8")
Gas line: φ15.88 (5/8") φ15.88 (5/8") × 1.0 φ15.88 (5/8")