Mitsubishi Electric HYBRID CITY MULTI PURY-M200-300YNW-A Product guide

PURY-M200-300YNW-A (-BS)
PURY-EM200-300YNW-A (-BS)
MODEL
AIR CONDITIONING SYSTEMS

MEES17K104
GENERAL LINE-UP GENERAL LINE-UP
I.GENERAL LINE-UP
Heat Recovery R2-Series
Heat Recovery High efficiency R2-Series
PURY-M300YNW-A(-BS)
PURY-M250YNW-A(-BS)PURY-M200YNW-A(-BS)
8, 10, 12HP
PURY-EM300YNW-A(-BS)
PURY-EM250YNW-A(-BS)PURY-EM200YNW-A(-BS)
8, 10, 12HP
body1.fm 1 ページ ２０１８年４月１０日 火曜日 午前１０時７分

PURY-M-YNW-A, PURY-EM-YNW-A
MEES17K104 1
CONTENTS R2-Series
I.R2-Series
1. SPECIFICATIONS .................................................................................................................................... 2
2. EXTERNAL DIMENSIONS ....................................................................................................................... 8
3. CENTER OF GRAVITY ............................................................................................................................ 12
4. ELECTRICAL WIRING DIAGRAMS ......................................................................................................... 13
5. SOUND LEVELS ...................................................................................................................................... 14
5-1. Sound levels in cooling mode .......................................................................................................... 14
5-2. Sound levels in heating mode.......................................................................................................... 16
6. VIBRATION LEVEL .................................................................................................................................. 18
7. OPERATION TEMPERATURE RANGE...................................................................................................19
8. CAPACITY TABLES ................................................................................................................................. 20
8-1. Correction by temperature ............................................................................................................... 20
8-2. Correction by total indoor................................................................................................................. 28
8-3. Correction by piping length .............................................................................................................. 30
8-4. Correction at frost and defrost ......................................................................................................... 31
8-5. Correction by antifreeze solution concentration............................................................................... 32
9. ELECTRICAL WORK................................................................................................................................ 33
9-1. Power supply for Outdoor unit ......................................................................................................... 33
9-2. Power cable specifications .............................................................................................................. 34
9-3. Power supply examples................................................................................................................... 35
10.M-NET CONTROL ................................................................................................................................... 36
10-1.Address setting................................................................................................................................ 36
11.PIPING DESIGN ...................................................................................................................................... 37
11-1.R32 Piping material ......................................................................................................................... 37
11-2.Piping Design .................................................................................................................................. 38
11-3.Refrigerant charging calculation ...................................................................................................... 47
11-4.Water piping .................................................................................................................................... 48
0000004760.BOOK 1 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
2
1. SPECIFICATIONS R2-Series
I.R2-Series1. SPECIFICATIONS
Model PURY-M200YNW-A (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 22.4
(Nominal) kcal/h 20,000
BTU/h 76,400
Power input kW 6.85
Current input A 11.5-10.9-10.5
EER kW/kW 3.27
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 25.0
(Nominal) kcal/h 21,500
BTU/h 85,300
Power input kW 6.94
Current input A 11.7-11.1-10.7
COP kW/kW 3.60
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~WP125/1~30
Sound pressure level (measured in anechoic room) *4 dB <A> 59.0/59.0
Sound power level (measured in anechoic room) *4 dB <A> 76.0/78.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 170
L/s 2,833
cfm 6,003
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 6.0
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 231 (510)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94L647
Wiring WKE94G951
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000004760.BOOK 2 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
3
1. SPECIFICATIONS R2-Series
Model PURY-M250YNW-A (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 28.0
(Nominal) kcal/h 25,000
BTU/h 95,500
Power input kW 9.92
Current input A 16.7-15.9-15.3
EER kW/kW 2.82
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 31.5
(Nominal) kcal/h 27,100
BTU/h 107,500
Power input kW 10.06
Current input A 16.9-16.1-15.5
COP kW/kW 3.13
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~WP125/1~37
Sound pressure level (measured in anechoic room) *4 dB <A> 60.5/61.0
Sound power level (measured in anechoic room) *4 dB <A> 78.5/80.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 185
L/s 3,083
cfm 6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 7.5
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 231 (510)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94L647
Wiring WKE94G951
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000004760.BOOK 3 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
4
1. SPECIFICATIONS R2-Series
Model PURY-M300YNW-A (-BS)
Number of HBC controller Single HBC Double HBC
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 33.5
(Nominal) kcal/h 30,000
BTU/h 114,300
Power input kW 13.08 11.09
Current input A 22.0-20.9-20.2 18.7-17.7-17.1
EER kW/kW 2.56 3.02
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 37.5
(Nominal) kcal/h 32,300
BTU/h 128,000
Power input kW 12.45 11.68
Current input A 21.0-19.9-19.2 19.7-18.7-18.0
COP kW/kW 3.01 3.21
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~WP125/2~45
Sound pressure level (measured in anechoic room) *4 dB <A> 61.0/67.0
Sound power level (measured in anechoic room) *4 dB <A> 80.0/86.5
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 240
L/s 4,000
cfm 8,474
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 8.5
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 231 (510)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94L647
Wiring WKE94G951
Standard attachment Document Installation Manual
Accessory -
Optional parts Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000004760.BOOK 4 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
5
1. SPECIFICATIONS R2-Series
Model PURY-EM200YNW-A (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 22.4
(Nominal) kcal/h 20,000
BTU/h 76,400
Power input kW 6.15
Current input A 10.3-9.8-9.5
EER kW/kW 3.64
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 25.0
(Nominal) kcal/h 21,500
BTU/h 85,300
Power input kW 6.77
Current input A 11.4-10.8-10.4
COP kW/kW 3.69
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~WP125/1~30
Sound pressure level (measured in anechoic room) *4 dB <A> 59.0/59.0
Sound power level (measured in anechoic room) *4 dB <A> 76.0/78.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 170
L/s 2,833
cfm 6,003
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 6.0
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 237 (523)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94L648
Wiring WKE94G951
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000004760.BOOK 5 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
6
1. SPECIFICATIONS R2-Series
Model PURY-EM250YNW-A (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 28.0
(Nominal) kcal/h 25,000
BTU/h 95,500
Power input kW 8.77
Current input A 14.8-14.0-13.5
EER kW/kW 3.19
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 31.5
(Nominal) kcal/h 27,100
BTU/h 107,500
Power input kW 9.84
Current input A 16.6-15.7-15.2
COP kW/kW 3.20
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~WP125/1~37
Sound pressure level (measured in anechoic room) *4 dB <A> 60.5/61.0
Sound power level (measured in anechoic room) *4 dB <A> 78.5/80.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 185
L/s 3,083
cfm 6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 7.5
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 237 (523)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94L648
Wiring WKE94G951
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000004760.BOOK 6 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
7
1. SPECIFICATIONS R2-Series
Model PURY-EM300YNW-A (-BS)
Number of HBC controller Single HBC Double HBC
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 33.5
(Nominal) kcal/h 30,000
BTU/h 114,300
Power input kW 11.79 10.02
Current input A 19.9-18.9-18.2 16.9-16.0-15.4
EER kW/kW 2.84 3.34
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 37.5
(Nominal) kcal/h 32,300
BTU/h 128,000
Power input kW 11.46 10.90
Current input A 19.3-18.3-17.7 18.4-17.4-16.8
COP kW/kW 3.27 3.44
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~WP125/2~45
Sound pressure level (measured in anechoic room) *4 dB <A> 61.0/67.0
Sound power level (measured in anechoic room) *4 dB <A> 80.0/86.5
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 240
L/s 4,000
cfm 8,474
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 8.5
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 237 (523)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94L648
Wiring WKE94G951
Standard attachment Document Installation Manual
Accessory -
Optional parts Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000004760.BOOK 7 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
8
2. EXTERNAL DIMENSIONS R2-Series
2. EXTERNAL DIMENSIONS
Service panel
Control box
13
4
7
Intake
air
Front view
Intake
air
Intake
air
Discharge air
Rear view
2
5
6
8
(Mounting pitch)
Bottom view
(Mounting pitch)
2×5-ø4.6 Hole (Make hole at the plastic fan guard for snow hood attachment)
<Snow hood attachment hole>
Top vi e w
Sling hole
Detachable leg (front and back, 2 points) Note 2*
2×2-14×31 Oval hole 2×2-14×20 Oval hole(without detachable leg)
Intake
air
Refrigerant
service valve
<High pressure>
Refrigerant
service valve
<Low pressure>
(INV Box)
Control box
(MAIN Box)
For transmission cables
For wires
For pipes
NO. Usage Specifications
Front through hole Bottom through hole Front through hole Front through hole Bottom through hole Bottom through hole Front through hole
148 X 84 Knockout hole
ø65 or ø40 Knockout hole ø52 or ø27 Knockout hole ø65 Knockout hole ø52 Knockout hole ø34 Knockout hole
150 X 94 Knockout hole
Connecting pipe specifications
ø34 Knockout hole
Note 1.Please refer to next page for information regarding necessary
spacing around the unit and foundation work.
2.The detachable leg can be removed at site. 3.At brazing of pipes, wrap the refrigerant service valve
with wet cloth and keep the temperature of refrigerant service valve under 120°C.
*1 Connect the refrigerant pipe to the service valve
according to the Installation Manual.
Bottom through hole
Model
Diameter
Refrigerant pipe Service valve
M250 ø22.2
ø15.88 Brazed *1
ø28.58
M200
High pressure Low pressure
M300
High pressure Low pressure
ø19.05 Brazed *1
132
207
256
148125
90
110
125
1495 303
1798
(60)
1858
5656 20
54
592
110
185
681(678~684)29.5
(740)
80760
80
166
181
152
172
216
160
243
150128
94 79
181
29.5
84
71
35
920
19.519.5 881
740
150
600=150×470
54
20
116
(60)
1 2 4 3 5 6 7 8
Left side view
Unit: mm
PURY-M200, 250, 300YNW-A(-BS)
0000004760.BOOK 8 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
9
2. EXTERNAL DIMENSIONS R2-Series
Front Front
<Top view>
*
<Unit:mm>
*
*
*
<Top view>
**
**
M10 anchor bolt
<field supply required>
Fixing plate
<field supply required>
<To be left open>
Front
Wall <H>
<To be left open>
*
Front
<Unit:mm>
*
*
*
*
*
*
*
Fixing plate
<field supply required>
M10 anchor bolt
<field supply required>
Wall <H>
<To be left open>
<To be left open>
<To be left open>
Front
Wall <H> Wall <H>
Wall <H>
Wall <H>
Front
Front
<To be left open>
Wall <H>
Front
Wall <H>
<To be left open>
<To be left open>
Front
Front
Front
Wall <H>
Wall <H>
Front
<To be left open>
<To be left open>
Detachable leg
Fig.A (without detachable legs) Fig.B (with detachable legs)
Fig.C (without detachable legs) Fig.D (with detachable legs)
Detachable leg
*
*
*
<Wall height limit> Front : Up to the unit height
Back : Up to the unit height
Side : Up to the unit height
<Side view>
Front
1. Required space around the unit
●In case of single installation
Secure enough space around the unit as shown in the figure below.
▪ With a space of at least
When the height of the walls on the front, back or on the sides<H>
2.
Foundation work
Take into consideration the surface strength, water drainage route,
piping route, and wiring route when preparing the installation site. <Note that the drain water comes out of the unit during operation.>
Build the foundation in such way that the corner of the installation leg is
securely supported as shown in the right figure.(Fig.A,B) When using a rubber isolating cushion, please ensure it is large enough to cover the entire width of each of the unit's legs.
The protrusion length of the anchor bolt must not exceed 30mm.(Fig.A,B) Use four fixing plates as shown in the right figure <field supply required>
when using post-installed anchor bolts.(Fig.C,D)
To prevent small animals and water and snow from entering the unit and damaging its parts,
close the gap around the edges of through holes for pipes and wires with filler plates <field supply required>.
When the pipes or cables are routed at the bottom of the unit,
make sure that the through hole at the base of the unit does not get blocked with the installation base.
Refer to the Installation Manual when installing units on an installation base.
●In case of collective installation
When multiple units are installed adjacent to each other, secure enough space to allow
for air circulation and walkway between groups of units as shown in the figures below.
At least two sides must be left open.
As with the single installation, add the height that exceeds the height limit<h>
to the figures that are marked with an asterisk.
If there is a wall at both the front and the rear of the unit, install up to six units
consecutively in the side direction and provide a space of 1000mm or more as inlet space/ passage space for each six units.
300mm to the wall on the back of the unit
▪ With a space of at least
100mm to the wall on the back of the unit
exceeds the wall height limit as defined below add the height that exceeds the height limit <h> to the figures that are marked with an asterisk.
15 min. 50 min. 50min.
100 min.
450 min.
300 min.
100 min.
30 min. 450 min.450 min. 450 min. 100 min.
450 min. 100 min.
450min.
1000 min.
900min. 300 min.
900min. 300 min.300 min.
15 min.
450 min.450 min.
450 min. 300 min.
15min.
30mm max.
30mm max.
Unit height h
H
Unit height h
H
1 2 4 3
2 1
1 2 3 4 5 6 7
0000004760.BOOK 9 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
10
2. EXTERNAL DIMENSIONS R2-Series
Service panel
Control box
13
4
7
Intake
air
Front view
Intake
air
Intake
air
Discharge air
Rear view
2
5
6
8
(Mounting pitch)
Bottom view
(Mounting pitch)
2×5-ø4.6 Hole (Make hole at the plastic fan guard for snow hood attachment)
<Snow hood attachment hole>
Top vi e w
Sling hole
Detachable leg (front and back, 2 points) Note 2*
2×2-14×31 Oval hole 2×2-14×20 Oval hole(without detachable leg)
Intake
air
Refrigerant
service valve
<High pressure>
Refrigerant
service valve
<Low pressure>
(INV Box)
Control box
(MAIN Box)
For transmission cables
For wires
For pipes
NO. Usage Specifications
Front through hole Bottom through hole Front through hole Front through hole Bottom through hole Bottom through hole Front through hole
148 X 84 Knockout hole
ø65 or ø40 Knockout hole ø52 or ø27 Knockout hole ø65 Knockout hole ø52 Knockout hole ø34 Knockout hole
150 X 94 Knockout hole
Connecting pipe specifications
ø34 Knockout hole
Note 1.Please refer to next page for information regarding necessary
spacing around the unit and foundation work.
2.The detachable leg can be removed at site. 3.At brazing of pipes, wrap the refrigerant service valve
with wet cloth and keep the temperature of refrigerant service valve under 120°C.
*1 Connect the refrigerant pipe to the service valve
according to the Installation Manual.
Bottom through hole
Model
Diameter
Refrigerant pipe Service valve
EM250 ø22.2
ø15.88 Brazed *1
ø28.58
EM200
High pressure Low pressure
EM300
High pressure Low pressure
ø19.05 Brazed *1
132
207
256
148125
90
110
125
1495 303
1798
(60)
1858
5656 20
54
592
110
185
681(678~684)29.5
(740)
80760
80
166
181
152
172
216
160
243
150128
94 79
181
29.5
84
71
35
920
19.519.5 881
740
150
600=150×470
54
20
116
(60)
1 2 4 3 5 6 7 8
Left side view
Unit: mm
PURY-EM200, 250, 300YNW-A(-BS)
0000004760.BOOK 10 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
11
2. EXTERNAL DIMENSIONS R2-Series
Front Front
<Top view>
*
<Unit:mm>
*
*
*
<Top view>
**
**
M10 anchor bolt
<field supply required>
Fixing plate
<field supply required>
<To be left open>
Front
Wall <H>
<To be left open>
*
Front
<Unit:mm>
*
*
*
*
*
*
*
Fixing plate
<field supply required>
M10 anchor bolt
<field supply required>
Wall <H>
<To be left open>
<To be left open>
<To be left open>
Front
Wall <H> Wall <H>
Wall <H>
Wall <H>
Front
Front
<To be left open>
Wall <H>
Front
Wall <H>
<To be left open>
<To be left open>
Front
Front
Front
Wall <H>
Wall <H>
Front
<To be left open>
<To be left open>
Detachable leg
Fig.A (without detachable legs) Fig.B (with detachable legs)
Fig.C (without detachable legs) Fig.D (with detachable legs)
Detachable leg
*
*
*
<Wall height limit> Front : Up to the unit height
Back : Up to the unit height
Side : Up to the unit height
<Side view>
Front
1. Required space around the unit
●In case of single installation
Secure enough space around the unit as shown in the figure below.
▪ With a space of at least
When the height of the walls on the front, back or on the sides<H>
2.
Foundation work
Take into consideration the surface strength, water drainage route,
piping route, and wiring route when preparing the installation site. <Note that the drain water comes out of the unit during operation.>
Build the foundation in such way that the corner of the installation leg is
securely supported as shown in the right figure.(Fig.A,B) When using a rubber isolating cushion, please ensure it is large enough to cover the entire width of each of the unit's legs.
The protrusion length of the anchor bolt must not exceed 30mm.(Fig.A,B) Use four fixing plates as shown in the right figure <field supply required>
when using post-installed anchor bolts.(Fig.C,D)
To prevent small animals and water and snow from entering the unit and damaging its parts,
close the gap around the edges of through holes for pipes and wires with filler plates <field supply required>.
When the pipes or cables are routed at the bottom of the unit,
make sure that the through hole at the base of the unit does not get blocked with the installation base.
Refer to the Installation Manual when installing units on an installation base.
●In case of collective installation
When multiple units are installed adjacent to each other, secure enough space to allow
for air circulation and walkway between groups of units as shown in the figures below.
At least two sides must be left open.
As with the single installation, add the height that exceeds the height limit<h>
to the figures that are marked with an asterisk.
If there is a wall at both the front and the rear of the unit, install up to six units
consecutively in the side direction and provide a space of 1000mm or more as inlet space/ passage space for each six units.
300mm to the wall on the back of the unit
▪ With a space of at least
100mm to the wall on the back of the unit
exceeds the wall height limit as defined below add the height that exceeds the height limit <h> to the figures that are marked with an asterisk.
15 min. 50 min. 50min.
100 min.
450 min.
300 min.
100 min.
30 min. 450 min.450 min. 450 min. 100 min.
450 min. 100 min.
450min.
1000 min.
900min. 300 min.
900min. 300 min.300 min.
15 min.
450 min.450 min.
450 min. 300 min.
15min.
30mm max.
30mm max.
Unit height h
H
Unit height h
H
1 2 4 3
2 1
1 2 3 4 5 6 7
0000004760.BOOK 11 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
12
3. CENTER OF GRAVITY R2-Series
3. CENTER OF GRAVITY
PURY-M200, 250, 300YNW-A (-BS)
Model X Y Z
Unit: mm
357 338 664PURY-M200YNW-A(-BS)
357 338 664
357 338 664
PURY-M250YNW-A(-BS)
PURY-M300YNW-A(-BS)
PURY-EM200, 250, 300YNW-A (-BS)
60
Y
681
740
1555
Z
1858
760 80
920
X
Model X Y Z
Unit: mm
355 339 678 PURY-EM200YNW-A(-BS)
355 339 678
355 339 678
PURY-EM250YNW-A(-BS)
PURY-EM300YNW-A(-BS)
60
Y
681
740
1555
Z
1858
760 80
920
X
0000004760.BOOK 12 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
13
4. ELECTRICAL WIRING DIAGRAMS R2-Series
4. ELECTRICAL WIRING DIAGRAMS
RSH01/02/03 For current detection
Central control transmission cable Indoor/Outdoor transmission cable
L Choke coil (for high frequency noise reduction)
For inrush current prevention
Resistor
R1,5
For opening/closing the discharge suction bypass
SV2
Pipe temperature
SV1a LEV2a,b,d 21S4a
Symbol
<Symbol explanation>
63H1 63HS1 63LS C700,C701, 21S4b DCL
Pressure control,Refrigerant flow rate control
Solenoid valve
For opening/closing the bypass circuit under the O/S
Heat exchanger capacity control
4-way valve
Explanation
Pressure sensor
Cooling/Heating switching
Pressure switch
High pressure protection for the outdoor unit
Discharge pressure Low pressure
Capacitor(inverter main circuit) Linear expansion valve DC reactor
TH5 TH4 TH3 TB7 TB3 TB1
Thermistor
Discharge pipe temperature ACC inlet pipe temperature Power supply
Terminal block
*1.Single-dotted lines indicate wiring not supplied with the unit. *2.Dot-dash lines indicate the control box boundaries. *3.Refer to the Data book for connecting input/output
signal connectors.
*4.Daisy-chain terminals (TB3) on the outdoor units in the
same refrigerant system together.
*5.Faston terminals have a locking function.
Make sure the terminals are securely locked in place after insertion. Press the tab on the terminals to removed them.
*6.Control box houses high-voltage parts.
Before inspecting the inside of the MAIN BOX or INV BOX, turn off the power,keep the unit off for at least 10 minutes, and confirm that the voltage of the connector RYPN on INV BOX has dropped to DC20V or less.
INV Board
IPM
THHS
SC-U
SC-V SC-W
41
CNCT2
yellow
SC-P1
SC-P1L DCL
FT-P2 FT-P1
X901 X902
R1,R5
2 1
green
++
C705, R705, C706 R706 C700, R700, C701 R701
1
CNFAN1
4
NR001
SC-L1
SC-L2SC-L3
SC-PL
CN-N red
IPM
CNDCP red CNINV
31 CNDCN
black
FAN Board
F001 DC 400V 10AT RSH01/02/03
14
CN80
SW001
LED4:CPU in operation LED1:Normal operation(Lit)
/ Error(Blink)
2 1
CN81 green
Noise Filter
Noise filter
L3 NL2L1
L
L3 NL2L1
Surge absorber
CN2
Power failure Detection circuit Noise filter
1 2 1 2
1 4 7
1 2
CN3 black
2 1 6 3 1
Control Board
312 123
312 123
CN202CN201 red
63LS63HS1
12
CNPOW
yellow
13
CN3K
yellow
13
CN3S
red
*3
13
CN3D
13
CN3N
blue
41
CN41
23
41
CN40
23
TP1 TP2
TB3 TB7
M1 M2 M1 M2 S
Indoor/Outdoor transmission cable
Central control transmission cable
*4
LED2 LED101
LED102 LED103
CNAC
3 1
SWU2
LED301
SW6SW4
Compressor ON/OFF output Error detection output
DC12V CN51
1's digit
10's digit
SW5
*3
SWU1
SWP3
LED301 Display setting/ Function setting
SW7
SW101
CN4A black
2314
CN4 black
2314
CNPS red
214
CN604 blue
21
CN603 blue
213
CN600
4521
PS Board
13
CNINV
yellow
21
CNFAN1
yellow
12
CNDC
4512
CN101
4
blue
CN304
2 1
blue
CN303
2 1
4 3 2 1
CN202
CN100
red
13
DB2
IPM power supply circuit
M-NET power supply circuit
CPU power supply circuit
32
CN110 black
21
2
22 2
ON OFF
USB TYPEA CNUSB
X07 X09
5 5 1 1
CN506
red
21S4b
Power failure detection circuit
CN507 black
6
SV2
X05 X06
3 5 1 6
CN505
SV1a
21S4a
6
F001 AC250V 3.15A T
CN-P
blue
CN19V
CNRY
UVW
MS
3~
SW001
LED4:CPU in operation LED1:Normal operation(Lit)
/ Error(Blink)
LED900:Relay power supply
L3 N
L1 L2
TB1
L1 L2 L3 N
Power Source
3N~ 50/60Hz 380/400/415V
ACCT1 ACCT2
TB7 Power selecting connector
LED4 *7
DB1
12
CNINT
4
red
P
63H1
RY63H
2 1
CNFG blue
TH5
CN211 green 1
3 4
TH3 TH7
CN212 red
1 2 3 4
Z25
3
CNTYP5 green 1
CNTYP4
1 2
Z24
TH15 TH4
CN192 green
1 2 3 4
LEV2a
M
1 2 3 4 6
CNLVB
red
LEV9
M
1 2 3 4 6
CNLVA
5
LEV2b
M
1 2 3 4 6
CNLVC
blue
M
1 2 3 4 6
CNLVD
yellow
CNPW
2314
2 1
13 RYPS1
23
U
1
RYPN
P
N
CNRYA red
21
LED3
*7
U
V
W
MS
3~
7 4 1 8
Motor (Compressor)
Fan motor (Heat exchanger)
*7.Control board LED display.
1 2 4
RYPS2
*5 *5
*5
1 2 1 4
CN2
2 3
Cooling/Heating switching
C705,C706
ACCT1,ACCT2
Current sensor(AC)
LEV9 Heat exchanger for inverter
RYFAN1
CN5 green
3 1
CN1
3 1
F4 AC 250V 6.3A T
Function
setting
5
X800
X901, X902
LED2 Normal operation(Lit)/Error(Blink)
In operation(Lit)/In stop(Unlit)
LED3 SW6-10 is OFF and
SW4-1~10 are OFF
Function setting by SW4 enable(Lit)/disable(Unlit)
SW6-10 is ON
LED4 USB connection
With(Lit)/Without(Unlit)
LED101 Normal operation(Lit)/IC Error(Unlit) LED102 Normal operation(Lit)/Error(Blink) for central control transmission LED103 Normal operation(Lit)/Error(Blink) for indoor/outdoor transmission
<INV BOX>
<MAIN BOX>
*6
THHS
1 3 4 5
Z22
3
CNTYP2 black 1
Z2
U
7
F1~F3 AC 250V 6.3A T
Z22,Z24,Z25 X901,X902
Function setting connector Magnetic relay(inverter main circuit)
5
12
CNFG5
blue
Z1
U
Compressor shell bottom temperature OA temperature
TH15 TH7
IPM temperature
THHS
M
1 2 3 4 6
CNLVE
green
LEV4
LEV2d
LEV4 Compressor discharge temperature control
ON
1
10
ON
1
10
ON
1
10
ON
1
10
ON
1
10
ON
1 4
ON
12
5
-
+
-
+
t° t° t°
t° t°
PURY-(E)M200, 250, 300YNW-A(-BS)
0000004760.BOOK 13 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
14
5. SOUND LEVELS R2-Series
5. SOUND LEVELS
5-1. Sound levels in cooling mode
Depending on the operation conditions, the unit generates noise caused by valve actuation, refrigerant flow, and
pressure changes when operating normally. Please consider to avoid location where quietness is required.
For HBC controller, it is recommended to be installed in places such as ceilings of corridor, rest rooms and plant rooms.
Measurement
location
1m
1m
Measurement condition
PURY-M200, 250, 300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 50/60Hz 75.5 62.5 62.5 60.0 54.0 49.5 44.5 40.0 61.0
Low noise mode 50/60Hz 54.5 53.0 47.0 46.0 40.0 35.0 33.0 33.5 47.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-M300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Cooling 50/60Hz 77.0 61.0 60.5 57.5 51.0 46.5 44.0 41.5 59.0
Low noise mode 50/60Hz 51.0 49.5 43.0 39.5 37.5 29.0 33.0 39.0 44.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-M200YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Cooling 50/60Hz 78.0 62.5 61.5 59.0 52.0 48.5 48.5 43.0 60.5
Low noise mode 50/60Hz 53.0 51.5 41.5 42.0 35.0 31.5 38.0 38.5 45.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-M250YNW-A(-BS)
0000004760.BOOK 14 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
15
5. SOUND LEVELS R2-Series
Depending on the operation conditions, the unit generates noise caused by valve actuation, refrigerant flow, and
pressure changes when operating normally. Please consider to avoid location where quietness is required.
For HBC controller, it is recommended to be installed in places such as ceilings of corridor, rest rooms and plant rooms.
Measurement
location
1m
1m
Measurement condition
PURY-EM200, 250, 300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Cooling 50/60Hz 75.5 62.5 62.5 60.0 54.0 49.5 44.5 40.0 61.0
Low noise mode 50/60Hz 54.5 53.0 47.0 46.0 40.0 35.0 33.0 33.5 47.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-EM300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 50/60Hz 77.0 61.0 60.5 57.5 51.0 46.5 44.0 41.5 59.0
Low noise mode 50/60Hz 51.0 49.5 43.0 39.5 37.5 29.0 33.0 39.0 44.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-EM200YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard 50/60Hz 78.0 62.5 61.5 59.0 52.0 48.5 48.5 43.0 60.5
Low noise mode 50/60Hz 53.0 51.5 41.5 42.0 35.0 31.5 38.0 38.5 45.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-EM250YNW-A(-BS)
0000004760.BOOK 15 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
16
5. SOUND LEVELS R2-Series
5-2. Sound levels in heating mode
Depending on the operation conditions, the unit generates noise caused by valve actuation, refrigerant flow, and
pressure changes when operating normally. Please consider to avoid location where quietness is required.
For HBC controller, it is recommended to be installed in places such as ceilings of corridor, rest rooms and plant rooms.
Measurement
location
1m
1m
Measurement condition
PURY-M200, 250, 300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Heating 50/60Hz 74.5 70.0 68.5 65.5 60.5 56.5 52.0 48.0 67.0
Low noise mode 50/60Hz 60.5 58.0 50.0 47.5 43.0 39.5 38.5 41.5 50.5
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-M300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Heating 50/60Hz 69.0 61.0 60.5 58.0 52.0 47.5 48.0 42.5 59.0
Low noise mode 50/60Hz 43.0 49.0 42.0 40.0 36.0 33.5 37.0 35.5 44.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-M200YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Heating 50/60Hz 69.0 62.5 62.0 60.0 54.0 49.5 50.5 44.0 61.0
Low noise mode 50/60Hz 47.5 51.5 46.0 44.5 40.5 37.0 41.0 37.5 48.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-M250YNW-A(-BS)
0000004760.BOOK 16 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
17
5. SOUND LEVELS R2-Series
Depending on the operation conditions, the unit generates noise caused by valve actuation, refrigerant flow, and
pressure changes when operating normally. Please consider to avoid location where quietness is required.
For HBC controller, it is recommended to be installed in places such as ceilings of corridor, rest rooms and plant rooms.
Measurement
location
1m
1m
Measurement condition
PURY-EM200, 250, 300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Heating 50/60Hz 74.5 70.0 68.5 65.5 60.5 56.5 52.0 48.0 67.0
Low noise mode 50/60Hz 60.5 58.0 50.0 47.5 43.0 39.5 38.5 41.5 50.5
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-EM300YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Heating 50/60Hz 69.0 61.0 60.5 58.0 52.0 47.5 48.0 42.5 59.0
Low noise mode 50/60Hz 43.0 49.0 42.0 40.0 36.0 33.5 37.0 35.5 44.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-EM200YNW-A(-BS)
63 125 250 500 1k 2k 4k 8k dB(A)
Standard Heating 50/60Hz 69.0 62.5 62.0 60.0 54.0 49.5 50.5 44.0 61.0
Low noise mode 50/60Hz 47.5 51.5 46.0 44.5 40.5 37.0 41.0 37.5 48.0
When Low noise mode is set,the A/C system's capacity is limited. The system could return to normal operation
from Low noise mode automatically in the case that the operation condition is severe.
10
20
30
40
50
60
70
80
90
63 125 250 500 1k 2k 4k 8k
NC-40
NC-30
NC-20
NC-60
NC-50
NC-70
Octave band central frequency (Hz)
Octave band sound level (dB)
Approximate minimum
audible limit on
continuous noise
Stand 50/60Hz
Low 50/60Hz
Sound level of PURY-EM250YNW-A(-BS)
0000004760.BOOK 17 ページ ２０１８年４月２６日 木曜日 午後４時３１分

MEES17K104
PURY-M-YNW-A, EM-YNW-A
18
6. VIBRATION LEVEL R2-Series
6. VIBRATION LEVEL
[PURY-M200-300YNW, PURY-EM200-300YNW]
* Vibration level varies depending on the conditions of actual installation site.
20cm
10cm
Concrete
Service panel side
Measurement point
Measurement condition
Measurement frequency: 1 Hz-80 Hz
Measurement point: Ground surface 20 cm away from the unit leg
Installation condition: Direct installation on the concrete floor
Power source: 3-phase 4-wire 380-400-415 V 50/60 Hz
Operation condition: JIS condition (cooling, heating)
Measurement device: Vibration level meter for vibration pollution VM-1220C (JIS-compliant product)
Vibration level
Model Vibration level (dB)
PURY-M200YNW-A (-BS) 45
PURY-M250YNW-A (-BS) 46
PURY-M300YNW-A (-BS) 47
PURY-EM200YNW-A (-BS) 45
PURY-EM250YNW-A (-BS) 46
PURY-EM300YNW-A (-BS) 47
0000004760.BOOK 18 ページ ２０１８年４月２６日 木曜日 午後４時３１分