Mitsubishi Electric Mr.SLIM PLA-RP BA2 Instruction manual

TECHNICAL DATA BOOK
CONTENTS
1. REFERENCE SERVICE MANUAL············································· 2
2. SPECIFICATIONS ······································································ 3
3. OUTLINES AND DIMENSIONS ···············································10
4. WIRING DIAGRAM··································································· 18
5. REFRIGERANT SYSTEM DIAGRAM······································ 28
6. PERFORMANCE CURVES······················································ 29
7. CORRECTION FACTORS························································ 31
8. APPLICABLE EXTENSION PIPE FOR EACH MODEL·········· 32
9. AIR FLOW DATA······································································ 35
10. NOISE CRITERION CURVES·················································· 45
11. OPTIONAL PARTS············································································51
<Indoor unit>
[Model names]
R410A
PLA-RP·BA(2)
PEAD-RP·EA(2)
PEAD-RP·GA
PKA-RP·GAL
PKA-RP·FAL(2)
<Outdoor unit>
[Model names]
SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS
PUHZ-HRP71/100VHA
PUHZ-HRP100/125YHA
PUHZ-HRP71/100VHA2
PUHZ-HRP100/125YHA2
September 2008
INVERTER
Zubadan
No. OCS11
REVISED EDITION-A
• Please void OCS11.
Revision :
•
PLA-RP •BA2 and PUHZ-HRP
•HA2 are added in REVISED
EDITION-A.
• Some descriptions have been
modified.

2
For information on service, please refer to the service manual as follows.
Model name Service Ref. Service
Manual No.
PLA-RP35/50/60/100/125BA
PLA-RP71/100/125BA2
PLA-RP35/50/60/100/125BA(1).UK/BA#2.UK
PLA-RP71/100/125BA2.UK
OCH412
OCB412
PKA-RP35/50GAL PKA-RP35/50GAL(#1) OC330
PKA-RP60/100FAL
PKA-RP50FAL2
PKA-RP60/100FAL(#1)
PKA-RP50FAL2(#1) OC331
PEAD-RP50/60/71/125EA PEAD-RP50/60/71/125EA(#1).UK HWE0521
PEAD-RP35/100EA2 PEAD-RP35/100EA2(#1).UK
PEAD-RP60/71/100GA PEAD-RP60/71/100GA(#1).UK HWE0506
1-2. OUTDOOR UNIT
Model name Service Ref. Service
Manual No.
OCH425
OCB425
PUHZ-HRP71/100VHA PUHZ-HRP71/100VHA
PUHZ-HRP100/125YHA PUHZ-HRP100/125YHA
PUHZ-HRP71/100VHA2 PUHZ-HRP71/100VHA2
PUHZ-HRP100/125YHA2 PUHZ-HRP100/125YHA2
1-1. INDOOR UNIT
1REFERENCE SERVICE MANUAL

3
2SPECIFICATIONS
2-1. CEILING CASSETTE TYPE
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-Medium2-Medium1-High) CFM
External pressure Pa
Sound level dB(A)
(Low-Medium2-Medium1-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Field drain pipe O.D. mm
inch
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PLA-RP71BA2 PLA-RP100BA2
PUHZ-HRP71VHA2 PUHZ-HRP100VHA2
24,200 34,100
7.1 ( 4.9 - 8.1 ) 10.0 ( 4.9 - 11.4 )
1.94 2.44
3.66 4.10
AA
0.73 0.74
27,300 38,200
8.0 ( 4.5 - 10.2 ) 11.2 ( 4.5 - 14.0 )
1.90 2.54
4.21 4.41
AA
--
1
50
230
32 40
14 - 16 - 18 - 21
495 - 565 - 635 - 740
20 - 23 - 26 - 30
710 - 810 - 920 - 1060
0
32 - 34 - 37 - 4028 - 30 - 32 - 34
White Munsell 6.4Y 8.9/0.4
840 (950)
840 (950)
298 (35)258 (35)
33-1/16 (37-3/8)
33-1/16 (37-3/8)
10-3/16 (1-3/8) 11-3/4 (1-3/8)
23 (6)
51 (13)
27 (6)
60 (13)
32
1-1/4
100
3,530
51
52
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
120
265
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
Single phase 230V 50Hz
Outdoor unit
3. Guaranteed voltage
198~264V, 50Hz

4
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-Medium2-Medium1-High) CFM
External pressure Pa
Sound level dB(A)
(Low-Medium2-Medium1-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Field drain pipe O.D. mm
inch
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PLA-RP100BA2 PLA-RP125BA2
PUHZ-HRP100YHA2 PUHZ-HRP125YHA2
34,100 42,700
10.0 ( 4.9 - 11.4 ) 12.5 ( 5.5 - 14.0 )
2.50 3.79
4.00 3.30
AA
0.74 0.71
38,200 47,800
11.2 ( 4.5 - 14.0 ) 14.0 ( 5.0 - 16.0 )
2.60 3.57
4.31 3.92
AA
--
3
50
400
16
20 - 23 - 26 - 30 22 - 25 - 28 - 31
710 - 810 - 920 - 1060 780 - 880 - 990 - 1090
00
32 - 34 - 37 - 40 34 - 36 - 39 - 41
White Munsell 6.4Y 8.9/0.4
840 (950)
840 (950)
298 (35)
33-1/16 (37-3/8)
33-1/16 (37-3/8)
11-3/4 (1-3/8)
27 (6)
60 (13)
32
1-1/4
100
3,530
51
52
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
134
295
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
3 phase 400V 50Hz
Outdoor unit
3. Guaranteed voltage
198~264V, 50Hz(HRP100, 125Y : 342~457V, 50Hz)

5
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-Medium2-Medium1-High) CFM
External pressure Pa
Sound level dB(A)
(Low-Medium2-Medium1-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Field drain pipe O.D. mm
inch
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PLA-RP100BA PLA-RP100BA PLA-RP125BA
PUHZ-HRP100VHA PUHZ-HRP100YHA PUHZ-HRP125YHA
34,100 34,100 42,700
10.0 ( 4.9 - 11.4 ) 10.0 ( 4.9 - 11.4 ) 12.5 ( 5.5 - 14.0 )
3.02 3.02 3.87
3.31 3.31 3.23
AAA
0.74 0.74 0.71
38,200 38,200 47,800
11.2 ( 4.5 - 14.0 ) 11.2 ( 4.5 - 14.0 ) 14.0 ( 5.0 - 16.0 )
3.10 3.10 3.88
3.61 3.61 3.61
AAA
---
13
50 50
230 400
32 16
20 - 23 - 26 - 30 22 - 25 - 28 - 31
710 - 810 - 920 - 1060 780 - 880 - 990 - 1090
00
32 - 34 - 37 - 40 34 - 36 - 39 - 41
White Munsell 6.4Y 8.9/0.4
840 (950)
840 (950)
298 (35)
33-1/16 (37-3/8)
33-1/16 (37-3/8)
11-3/4 (1-3/8)
25 (6)
55 (13)
32
1-1/4
100
3,530
52
53
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
120 134
265 295
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
V:Single phase 230V 50Hz, Y:3 phase 400V 50Hz
Outdoor unit
3. Guaranteed voltage
198~264V, 50Hz(HRP100, 125Y : 342~457V, 50Hz)

6
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-High) CFM
External pressure Pa
Sound level dB(A)
(Low-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Unit drain pipe O.D.
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PEAD-RP71EA PEAD-RP100EA2
PUHZ-HRP71VHA PUHZ-HRP100VHA
PUHZ-HRP71VHA2 PUHZ-HRP100VHA2
24,200 34,100
7.1 (4.9 - 8.1 ) 10.0 ( 4.9 - 11.4 )
2.15 3.06
3.30 3.27
AA
0.83 0.86
27,300 38,200
8.0 ( 4.5 - 10.2 ) 11.2 ( 4.5 - 14.0 )
2.34 3.10
3.42 3.61
BA
--
1
50
230
32 (VHA)/ 40 (VHA2)32
20 - 25 33.5 - 42
706 - 883 1183 - 1483
70 70
37-41 44-50
Galvanized sheets
1175 1415
740
325
46-1/8 55-11/16
29-1/8
12-13/16
44 65
97 143
R1 (External thread)
100
3,530
52 (VHA)/ 51 (VHA2)
53 (VHA)/ 52 (VHA2)
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
120
265
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
Single phase 230V 50Hz
Outdoor unit
3. Guaranteed voltage
198~264V, 50Hz
2-2. CEILING-CONCEALED TYPE

7
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-High) CFM
External pressure Pa
Sound level dB(A)
(Low-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Unit drain pipe O.D.
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PEAD-RP100EA2 PEAD-RP125EA
PUHZ-HRP100YHA PUHZ-HRP125YHA
PUHZ-HRP100YHA2 PUHZ-HRP125YHA2
34,100 42,700
10.0 ( 4.9 - 11.4 ) 125. ( 5.5 - 14.0 )
3.06 3.89
3.27 3.21
AA
0.86 0.82
38,200 47,800
11.2 ( 4.5 - 14.0 ) 14.0 ( 5.0 - 16.0 )
3.10 3.88
3.61 3.61
AA
--
3
50
400
16
33.5 - 42 33.5 - 42
1183 - 1483 1183 - 1483
70 70
44 - 50 44 - 50
Galvanized sheets
1415
740
325
55-11/16
29-1/8
12-13/16
65
143
R1 (External thread)
100
3,530
52 (YHA)/ 51 (YHA2)
53 (YHA)/ 52 (YHA2)
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
134
295
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
3 phase 400V 50Hz
Outdoor unit
3. Guaranteed voltage
Indoor unit:198~264V, 50Hz Outdoor unit:342~457V, 50Hz

8
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-High) CFM
External pressure Pa
Sound level dB(A)
(Low-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Unit drain pipe O.D. mm
inch
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PEAD-RP71GA PEAD-RP100GA PEAD-RP100GA
PUHZ-HRP71VHA PUHZ-HRP100VHA PUHZ-HRP100YHA
PUHZ-HRP71VHA2 PUHZ-HRP100VHA2 PUHZ-HRP100YHA2
24,200 34,100 34,100
7.1 ( 4.9 - 8.1 ) 10.0 ( 4.9 - 11.4 ) 10.0 ( 4.9 - 11.4 )
2.15 3.08 3.08
3.30 3.25 3.25
AAA
0.83 0.86 0.86
27,300 38,200 38,200
8.0 ( 4.5 - 10.2 ) 11.2 ( 4.5 - 14.0 ) 11.2 ( 4.5 - 14.0 )
2.34 3.28 3.28
3.42 3.41 3.41
BBB
---
13
50 50
230 400
32 (VHA)/ 40 (VHA2)32 16
20-25 26.5-33
706-883 935-1165
10/50/70 10/50/70
35-38/37-41/37-43 40-43/42-45/42-46
Galvanized sheets
1171 1411
740
275
46-1/8 55-9/16
29-1/8
10-13/16
42 50
93 111
R1 (External thread)
1-1/4
100
3,530
52 (VHA, YHA)/ 51 (VHA2, YHA2)
53 (VHA, YHA)/ 52 (VHA2, YHA2)
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
120 134
265 295
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
V:Single phase 230V 50Hz, Y:3 phase 400V 50Hz
Outdoor unit
3. Guaranteed voltage
198~264V, 50Hz(HRP100Y : 342~457V, 50Hz)

9
Model name Indoor unit
Outdoor unit
Cooling Capacity Btu/h
kW
Total input kW
EER
Energy label class
SHF
Heating Capacity Btu/h
kW
Total input kW
COP
Energy label class
Booster heater kW
Power supply Phase
Cycle Hz
Voltage V
Breaker size A
Indoor unit Air flow CMM
(Low-High) CFM
External pressure Pa
Sound level dB(A)
(Low-High)
External finish (Panel)
Dimension W : mm
Unit (Panel) D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
Unit (Panel) lbs
Field drain pipe I.D.
Outdoor unit Air flow CMM
CFM
Sound level at cooling dB(A)
Sound level at heating dB(A)
External finish
Dimension W : mm
D : mm
H : mm
W : inch
D : inch
H : inch
Weight kg
lbs
Refrigerant pipe size Gas side O.D. mm
inch
mm
inch
Liquid side O.D. mm
inch
Refrigerant pipe length Height difference m
Length m
PKA-RP100FAL PKA-RP100FAL
PUHZ-HRP100VHA PUHZ-HRP100YHA
PUHZ-HRP100VHA2 PUHZ-HRP100YHA2
34,100 34,100
10.0 ( 4.9 - 11.4 ) 10.0 ( 4.9 - 11.4 )
2.93 2.93
3.41 3.41
AA
0.77 0.77
38,200 38,200
11.2 ( 4.5 - 14.0 ) 11.2 ( 4.5 - 14.0 )
3.10 3.10
3.61 3.61
AA
--
13
50 50
230 400
32 (VHA)/ 40 (VHA2) 16
22 - 28
780 - 990
0
41 - 46
White Munsell 3.4Y 7.7/0.8
1680
235
340
66-1/8
9-1/4
13-3/8
28
62
20
13/16
100
3,530
52 (VHA, YHA)/ 51 (VHA2, YHA2)
53 (VHA, YHA)/ 52 (VHA2, YHA2)
Ivory Munsell 3Y 7.8/1.1
950
330+30
1350
37-3/8
13 + 1-3/16
53-1/8
120 134
265 295
15.88
5/8
9.52
3/8
Max. 30
Max. 75
NOTE: 1. Rating conditions (ISO T1)
Cooling Indoor : D.B. 27°C (80°F) W.B. 19°C (66°F) Outdoor : D.B. 35°C (95°F) W.B. 24°C (75°F)
Heating Indoor : D.B. 20°C (68°F) Outdoor : D.B. 7°C (45°F) W.B. 6°C (43°F)
Refrigerant piping length (one way) : 5m (16ft.)
2. Guaranteed operating range
Indoor Outdoor
Cooling Upper limit D.B. 32°C, W.B. 23°C D.B. 46°C
Lower limit D.B. 19°C, W.B. 15°C D.B. -5°C *
Heating Upper limit D.B. 28°C D.B. 21°C, W.B. 15°C
Lower limit D.B. 17°C D.B. -25°C, W.B. -25°C
4. Above data are based on the indicated voltage.
* If optional air protect guide is installed : D.B.-18°C
Indoor unit Single phase 230V 50Hz
V:Single phase 230V 50Hz, Y:3 phase 400V 50Hz
Outdoor unit
3. Guaranteed voltage
198~264V, 50Hz(HRP100Y : 342~457V, 50Hz)

10
3OUTLINES AND DIMENSIONS
37728460
()
Ceiling hole
Branch duct hole
Drain pipe
connected to VP-25
Ceiling
Grille
Drain hole
Models
Auto vane
(Air outlet)
Air intake grille
Ceiling
Cut out hole
Cut out hole
Cut out hole
Burring hole pitch
Burring hole pitch
Burring hole
Burring hole
Power supply wire,
Indoor unit/Outdoor unit
connecting wire entry
Indoor unit/Outdoor unit
connecting terminal block
Indoor power supply
terminal block(Option part)
Control wire entry
Air intake hole
Air intake hole
Air outlet hole
Air outlet hole
Connected the attached
flexible pipe or socket.
Keep approximately
10 to 15mm space
between unit ceiling
and ceiling slab.
Branch duct hole
Fresh air
intake hole
Ceiling hole
Suspension bolt pitch
Suspension bolt pitch
Remote controller
terminal block
Suspension bolt
M10 or W3/8
(7.5)(7.5)
605
+35
- 5
620
DEFROST/STAND BY lamp
Receiver
Operation lamp
In case of standard grille : PLP-6BA / PLP-6BAMD
In case of wireless remote controller : PLP-6BALM
Auto Grille
Air intake grille up/down discharge
Emergency operation
switch<Cooling>and
Emergency Up/Down switch<Up>
160
160
500
500
597
83 36
950
8336
950 597
A
17 +5
0
B35
190
156
105
140
50~70
160
840
150
90
C
D
840
187.5
20~45
860~910
20~45
810
20~45
860~910
20~45
24
160
++
+
+
++++
+
M
M
M
M
120
120
:175
:125
167
158
Vane motor
2
1
Drain pump clean hole
and Drain emergency
drainage hole
130 100
70
155
350
90 100 100 90
BACDE
241 258
80
87
74
400
298
85 77
440
281
2
1
Refrigerant pipe
···:6.35
Flared connection
···1/4 inch
Refrigerant pipe
···:9.52
Flared connection
···3/8 inch
Refrigerant pipe
···:12.7
Flared connection
···1/2 inch
Refrigerant pipe
···:15.88
Flared connection
···5/8 inch
Refrigerant pipe
:6.35 / :9.52
Flared connection
1/4 inch / 3/8 inch
(compatible)
PLA-RP35/50BA
PLA-RP60BA
PLA-RP71BA
PLA-RP100,125,140BA
PLA-RP71BA2
PLA-RP100,125BA2
Detail drawing of fresh air intake hole
Detail connecting of branch duct(Both aspects)
3-:2.8
14-:2.8
:150
:100
Emergency operation
switch<Heating>and
Emergency Up/Down switch<Down>
In case of Auto-Grille : PLP-6BAJ
Suspension bolt
lower edge
170
+
Ceiling
Air intake grille
Max. 4.0m
L.L Filter
Ceiling
Grille
Indoor unit
1500mm
or more
1000mm or more
3000mm or more
1800mm or more
from floor
For high
attachment
Indoor unit
Obstacle
Floor
Note 1. Please choose the Grille from a standard grille or Auto-Grille.
2. As for drain pipe, please use VP-25(O.D. :32 PVC TUBE).
Drain pump is included.
Max. lifting height is 850mm from the ceiling.
3. As for suspension bolt, please use M10 or W3/8. (Procured at local site)
4. Electrical box may be removed for the service purpose.
Make sure to slack the electrical wire little bit for control/ power wires connection.
5. The height of the indoor unit is able to be adjusted with the grille attached.
6. For the installation of the optional high efficiency filter or optional multi-functional casement.
1) Requires E or more space between transom and ceiling for the installation.
2) Add 135 mm to the dimensions +marked on the figure.
3) The optional high efficiency filter becomes optional multi-functional casement and concomitant use.
7. When installing the branch ducts, be sure to insulate adequately.
Otherwise condensation and dripping may occur. (It becomes the cause of dew drops/water dew.)
8. As for necessary installation/service space, please refer to the left figure.
INDOOR UNIT
PLA-RP35BA PLA-RP50BA PLA-RP60BA PLA-RP100BA PLA-RP125BA
PLA-RP71BA2 PLA-RP100BA2 PLA-RP125BA2
Unit : mm

11
PEAD-RP35EA2
PEAD-RP50EA
PEAD-RP60EA
PEAD-RP71EA
PEAD-RP100EA2
PEAD-RP125EA
2
1
3
4
5
6
7
Refrigerant piping flare connection (liquid :F copper tube):HP
Refrigerant piping flare connection (gas :G copper tube):LP
Drain R1(External thread)
Electrical parts box
Drain Pump (Option)
Drain Pipe (Option) ... Flexible joint VP-25(I.D.
: 32)
Filter
R407C Outdoor unit : 9.52
F
R410A Outdoor unit : 6.35 +
R407C Outdoor unit : 9.52 +
Outdoor unit (SUZ) : 6.35
EDCBA
804830
- 305772
Model
RP60
R407C Outdoor unit : 15.88
G
R410A Outdoor unit : 12.7 +
15.88
104410702902801012
RP35,50
+Initial setting
2
1
3
4
Air inlet
Air outlet
Access door 55
50~150
81
197
Service space:500 or more
Keep duct-work length 850mm or more.
Be sure to apply the air filter
near the air inlet grille.
5
6
75 44
18
365~465
B81
10
56 355
7
159
243
Air outlet
Air inlet
7
Lifting bolt hole
(1422)
10- : 3 (RP35,50)
12- : 3 (RP60)
In case of rear inlet
In case of bottom inlet
10- : 3 (RP35,50)
12-
: 3 (RP60)
D30
C
10
81BC
A
450
450
10- : 3 (RP35,50)
12-
: 3 (RP60)
176
40
288
256
3.5 3.5
10
109 179
10
35
24
30640
30
21
277
80
45
282
13
13E
A
61 227
29
85
40 176
10
15
3.5
256 BC 81
10
81
A
Set
R407C outdoor unit : 19.05158416104704601552RP140
15.8810441070290
F
R410A Outdoor unit : 15.88 +
EDCBA
12841310370360
2801012
1252
Model
RP100,125
RP71
+Initial s etting
7
44
243
308
323
75
6
5
13
Refrigerant piping flare connection (liquid :9.52 copper tube):HP
Refrigerant piping flare connection (gas :F copper tube):LP
Drain R1 (External thread)
Electrical parts box
Drain Pump (Option)
Drain Pipe (Option) ... Flexible joint VP25(I.D.:32)
Filter
Service space:500 or more
81
365~465
197
81
50~150
55
29
Access door
Air outlet
Air inlet
43
12
7
6
5
4
3
2
1
113
307
122
12-:3
(14x22)
Lifting bolt hole
45
Set
210
12-:3
450
450
140
282
680
3.5 3.5
30
319
261
181
40
30
A
CB
81
10
375
10
80
CB81
A
E13
30D
20
35
30
1053 169
Keep duct-work length 850mm or more.
Be sure to apply the air filter
near the air inlet grille.
Unit : mm

12
PEAD-RP60GA
PEAD-RP71GA
PEAD-RP100GA
Unit : mm
Model A B C D E
7
7
9
8
9.52
9.52
15.88
15.88
8
10
FG H J
RP60
RP71
RP100
1125
1125
1365
1090
1090
1330
1050
1050
1290
1012
1012
1252
840
840
1080
Outdoor unit(SUZ) : 6.35
Other outdoor unit : 9.52
*
R410A Outdoor unit : 15.88 *
R407C Outdoor unit : 19.05
* Initial setting

13
PKA-RP35GAL PKA-RP50GAL Unit : mm
Knockout hole for right piping Refrigerant pipe. Drain pipe. Wiring hole
21
Right side Less than 15
70 245
60
235
Auto vane
Front view
Air intake
Air intake
Air intake
Air intake
198
53
340
715 225
340 80 280 233
990
21
Left side
Knock out hole for left piping Refrigerant pipe.Drain pipe.Wiring hole. 60
70 245
(Necessary clearance for unit installation)
Right side
Allowing clearances Front view
Less than 130
50 or more 150 or more
180 or more 30 or more
for bolts
Left-rear piping hole
left-rear piping
R52.5R52.5
Installation plate balance point hole
Details of installation plate
49-:5hole for tapping screw
Knockout hole for right-rear piping
Right-rear piping hole
Unit center
14-:14hole
Knockout hole for
425
420
170
190
210
230
0
322 0 35 55 80 130 190 230 272 310 0
35
95
150
205
260
320
345
495
20
75
135
190
245
300
360
405
495
32
0
+1 Sleeves are available on the market. +2 This size shows the lower end of through hole.
:90~:100:90 Through hole
Sleeve +1
35, 50 Model
R52.5
R52.5
Gas pipe
Liquid pipe
Terminal block for Terminal block to outdoor unit
Filter grip
Service panel (Power supply access)
(Flexible hose total length800)
(Right side piping
installation)
(Left side piping
installation)
Unit drain pipe O.D.20
Front view(to open the grille)
700
449 86
581 54
31 280
35
Knockout hole for under piping Refrigerant piping.Drain pipe. Wiring hole
12-Louvers(manual)
Air outlet
Lower side
80
50
395400
190
60
70 35
79
160 40
235
705
power supply (Heater (PKH-P35, 50GALH only))
153
GAS SIDE
LIQUID SIDE
RP35, 50 P35, 50
:6.35 :9.52 :12.7 :15.88
—
:9.52
—
:15.88
Use the current nuts meeting the pipe size of the outdoor unit. Available pipe size
: Initial flare nut size

14
PKA-RP50FAL2 Unit : mm
PKA-RP60FAL
235
45
235
45
235
45
235
62.5
13
58 42
340
197
Top
Front Right side
Left side 1400
1090 Air intake
235
C
Knockout hole for right piping
Refrigerant pipe. Drain pipe
Knockout hole for
left piping
Drain hose for
left-hand side piping
Drain hose
Lower side
Auto vanes
(Gas pipe)
Drain hose O.D.20
Bolt
Gas pipe
15
(Liquid pipe)
Liquid pipe :9.52(3/8F)
Gas pipe :15.88(5/8F)
Liquid pipe
A
30
32
39
98
37
74
439
100
30
37
74
4
2980
280
3030
18430
60
10
39
37
65
100
AB C
Knockout hole for wiring
25
1110 183
240
B
1120
552
55
120
107
111
Air outlet
552 Air outlet
Louvers (manual)
Under panel
Removable at left-hand
side piping Knockout hole for under-piping
Refrigerant pipe. Drain pipe
Rear piping opening
Range for left rear piping opening
12-ø6 hole for
tapping screw
66-ø6 hole for
tapping screw
Wall fixture
Unit center
32-ø12 hole for bolt 225
18 18 91
900
990
455
285
245
19
240 280 314
610 90
Drainage range
on left-hand side
Drainage range
on right-hand side
10 91=(910)
180
Terminal block for heater (PKH only)
Terminal block for indoor/outdoor connecting line
Display section
Receiving
section
Power lamp
Emergency switch(Heat)
Emergency switch(Cool)
Defrosting Initial heating lamp
GAS SIDE
LIQUID SIDE
RP50
:6.35
:9.52
:15.88
:12.7
:9.52
:15.88
:90
RP60,71 / P60,71
+1 Sleeves are available on the market.
Use the current nuts meeting
the pipe size of the outdoor unit.
Sleeve +1Through hole
:90~ :100
Available pipe size
: Initial flare nut size

15
PKA-RP100FAL Unit : mm
235
45
235
45
235
45
235
45
235
62.5
13
58 42
340
197
Top
Front Right side
Display section
Receiving
section
Power lamp
Emergency switch(Heat)
Emergency switch(Cool)
Defrosting Initial heating lamp
Left side 1680
1370 Air intake 235
C
Knockout hole for right piping
Knockout hole for left piping
Drain hose for left-hand side piping
Drain hose
Drain hose
Lower side
Auto vane
(Gas pipe)
Bolt
Gas pipe
15
(Liquid pipe)
Liquid pipe
A
30
32
39
98
37
74
439
100
30
37
74
4
2980
280
3030
18430
60
10
39
37
65
100
AB C
Knockout hole for wiring
25
1110 183
240
B
1400
55
120
102
111
694 Air outlet 694 Air outlet
Louvers (manual)
Under panel
(Removable at left-hand side piping)
Knockout hole for under-piping
Refrigerant pipe. Drain pipe
Rear piping opening
Range for left rear piping openingRange for left rear piping opening
12-ø6 hole for tapping screw
84-ø6 hole for
tapping screw
Wall fixture
Unit out line Unit center
41-ø12 hole
for bolt 295 225
18 18
91
900
1270
595
285
245
19
240 280 314
750 90
Drainage range
on right-hand side
13 91=(1183)
180
Drainage range
on left-hand side
Terminal block for heater (PKH only)
Terminal block for indoor/outdoor connecting line
Drain hose O.D.20
:Initial flare nut size
GAS SIDE
LIQUID SIDE
RP100
:9.52
:15.88
:19.05
P100
:9.52
:19.05
Use the current nuts meeting the pipe size
of the outdoor unit.
Available pipe size

16
Handle for moving
Side Air Intake
Front piping cover
Rear piping cover
Terminal connection
Left···Power supply wiring Right···Indoor/Outdoor wiring
Earth terminal
Service panel
Handle for moving
1
2
Air Discharge
Rear Air Intake
Side Air Intake

···Refrigerant GAS pipe connction (FLARE)W15.88(5/8 inch)

···Refrigerant LIQUID pipe connection (FLARE)W9.52(3/8 inch)
+1 ···Indication of STOP VALVE connection location.
Example of Notes
Piping Knockout Hole Details
600175 175
330
417
42
66
53 56
45
(19)
28 370
2-U Shaped notched holes (Foundation Bolt M10)
2-12 x 36 Oval holes (Foundation Bolt M10)
Installation Feet
30
45 40
65
92
27 55
23 73 63
Rear piping hole (Knockout)
Rear trunking hole (Knockout)
Power supply wiring hole (2-
W
27Knockout)
W
92
19 55
92
75 40
73 63
23 27 92
Right piping hole (Knockout) Right trunking hole
(Knockout)
Power supply wiring hole (2-
W
27Knockout)
W
92
92
65
45
40
27 55
23 73 63
Front piping hole (Knockout)
Front trunking hole (Knockout)
Power supply wiring hole (2-
W
27Knockout)
W92
14514522030 145
81 219
71
71
Bottom piping hole (Knockout)
Drain hole (5-W33)
1350
23
950
A
+1 447
+1 443
371 635
322
Handle for moving
HRP·VHA HRP·YHA
1,079
A
930
Air intake
Rear Air Intake
Handle for moving
Handle for moving
Over
Over
Over
Over
Less than
Piping and wiring connections can be made from 4 directions: front, right, rear and below.
4 PIPING-WIRING DIRECTIONS
3 FOUNDATION BOLTS
2 SERVICE SPACE
1 FREE SPACE (Around the unit)
Please secure the unit firmly with 4 foundation (M10) bolts. (Bolts and washers must be purchased locally.)
<Foundation bolt height>
Dimensions of space needed for service access are shown in the below diagram.
The diagram below shows a basic example. Explantion of particular details are given in the installation manuals etc.
30
FOUNDATION
10
500
500 150
Service space
FREE
Over 10mm
Over 10mm
Over 150mm
Over 1000mm
OUTDOOR UNIT Unit : mm
PUHZ-HRP71VHA
PUHZ-HRP100VHA
PUHZ-HRP100YHA
PUHZ-HRP125YHA

17
Handle for moving
Side Air Intake
Front piping cover
Rear piping cover
Air intake
Rear Air Intake
Handle for moving
Air Discharge
Rear Air Intake
Side Air Intake
···Refrigerant GAS pipe connction (FLARE) 15.88(5/8 inch) ···Refrigerant LIQUID pipe connection (FLARE) 9.52(3/8 inch)
1 ···Indication of STOP VALVE connection location.
Example of Notes
Piping Knockout Hole Details
600175 175
330
417
42
66
53 56
45
(19)28 370
2-U Shaped notched holes
(Foundation Bolt M10)
2-12 x 36 Oval holes (Foundation Bolt M10)
Installation Feet
30
45 40
65
92
27 55
23 73 63
Rear piping hole
(Knockout)
Rear trunking hole (Knockout)
Power supply wiring hole (2- 27Knockout)
92
19 55
92
75 40
73 63
23 27 92
Right piping hole
(Knockout) Right trunking hole
(Knockout)
Power supply wiring hole (2- 27Knockout)
92
92
65
4540
27 55
23 73 63
Front piping hole
(Knockout)
Front trunking hole
(Knockout)
Power supply wiring hole
(2- 27Knockout)
92
14514522030 145
81 219
71
71
Bottom piping hole (Knockout)
Drain hole (5- 33)
23
HRP·VHA2
HRP·YHA2
1,079
A
930
Over
Over
Over
Over
Less than
Piping and wiring connections
can be made from 4 directions:
front, right, rear and below.
4 PIPING-WIRING DIRECTIONS
3 FOUNDATION BOLTS
2 SERVICE SPACE
1 FREE SPACE (Around the unit)
Please secure the unit firmly with 4 foundation (M10) bolts. (Bolts and washers must be
purchased locally.)
<Foundation bolt height>
Dimensions of space needed for service access are
shown in the below diagram.
The diagram below shows a
basic example. Explantion of particular details is
given in the installation manuals etc.
30
FOUNDATION
10
500
500 150
Service space
Handle for moving
Handle for moving
Service panel
A
2
1
+1 443
+1 447
635
371
1350
322
950
Handle for moving
Handle for moving
Earth terminal
Terminal connection
Left ····Power supply wiring
Right··· Indoor/Outdoor wiring
Over 10mm Over 10mm
Over 150mm
Over 1000mm
FREE
Unit : mm
PUHZ-HRP71VHA2
PUHZ-HRP100VHA2
PUHZ-HRP100YHA2
PUHZ-HRP125YHA2

18
WIRING DIAGRAM
4
INDOOR/OUTDOOR
COMMUNICATION
CN3C
(BLU)
<Table 2>SW2(CAPACITY CODE)
Manufacture/Service
PLA-RP35BA
MODELS
SW2
ON
OFF
12345
Manufacture/Service
PLA-RP100BA
MODELS
ON
OFF
12345
PLA-RP50BA
ON
OFF
12345
PLA-RP125BA
ON
OFF
12345
PLA-RP60BA
ON
OFF
12345
PLA-RP140BA
ON
OFF
12345
PLA-RP71BA
ON
OFF
12345
114169
1
1
3
1 3
4
51
41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CN2L
ON OFF
SWE
J42J41
SW2SW1
LED3 LED2 LED1
LED2
LED1
RU
SW2
SW1
CNB
3
9
5555
4 5 3
tt t
FS TH2 TH5 TH1
MV
BZ
MVMVMV
MMMM
W.B
TB6
R.B
I.B
MT
M
14
21
21
21
1
2
1
2
Refer to tables 1 and 2.
TRANSMISSION
WIRES
DC12V
TB4
YLW
ORN
ORN
BRN
YLW
YLW
ORN
DCL
TO OUTDOOR
UNIT
135
31
DC280V
X1
M
1~
DP
D.U.M
CNP
(BLU)
ZNR02
ZNR01
FUSE
DSA
OUTDOOR
CN01
(BLK)
RECTIFICATION
U
U
S1
S2
S3
741
3~
MF
MS
CN3G
U.B
AUTOMATIC FILTER ELEVATION PANEL
(OPTIONAL PART)
CN3A
31
AUTO GRILLE
POWER
CNAC
(WHT)
13
REMOCON
CN22
(BLU)
I-SEE SENSOR
CN4Y
(WHT)
I-SEE
SENSOR MOTOR
CN6Y
(RED)
WIRELESS
CN90
(WHT)
AUTO GRILLE
CN3G
(BLK)
I-SEE SENSOR
CORNER PANEL
(OPTIONAL PART)
I-SEE
SENSOR
GRILLE
VANE
CNV( WHT)
Pair No.
FAN
CNMF
(WHT)
INTAKE
CN20
(RED)
FLOAT SW
CN4F
(WHT)
LIQUID/PIPE
CN44
(WHT)
TB5
CN32
(WHT)
CN51(WHT)
CN41(WHT)
<Table 1>SW1(MODEL SELECTION)
Manufacture/Service
SW1
ON
OFF
12345
+Be sure to turn off the power source
and then disconnect fan motor connector.
(Failure to do so will cause trouble in Fan motor.)
13
13 5
SYMBOL SYMBOLNAME NAME SYMBOL NAME
I.B
INDOOR CONTROLLER BOARD
FUSE (T6.3AL250V)
VARISTOR
SURGE ABSORBER
CONNECTOR (LOSSNAY)
CONNECTOR (REMOTE SWITCH)
CONNECTOR (HA TERMINAL-A)
CONNECTOR (CENTRALLY CONTROL)
POWER SUPPLY (I.B)
POWER SUPPLY (R.B)
TRANSMISSION (INDOOR-OUTDOOR)
RELAY (DRAIN PUMP)
SWITCH (MODEL SELECTION) +See table 1
SWITCH (CAPACITY CORD) +See table 2
CONNECTOR (EMERGENCY OPERATION)
FAN MOTOR
VANE MOTOR
DRAIN-UP MACHINE
DRAIN FLOAT SWITCH
TERMINAL BLOCK (Indoor unit Power (option))
TERMINAL BLOCK (
INDOOR/OUTDOOR CONNECTING LINE )
TERMINAL BLOCK (REMOTE CONTROLLER
TRANSMISSION LINE)
REACTOR
ROOM TEMP. THERMISTOR
(0/ 15k, 25/ 5. 4kDETECT)
PIPE TEMP. THERMISTOR/LIQUID
(0/ 15k, 25/ 5. 4kDETECT)
COND. / EVA. TEMP. THERMISTOR
(0/ 15k, 25/ 5. 4kDETECT)
MF
FUSE
MV
ZNR01,02
DSA
DP
CN2L
FS
CN32
TB2
CN41
CN51
TB4
DCL
LED1
TB5,TB6
LED2
TH1
LED3
X1
TH2
SW1
TH5
SW2
SWE
[LEGEND]
TO OUTDOOR UNIT
1
3
5
31
CN01
(BLK)
ORN
YLW
BLU
RED
GRN/YLW
I.B
+1(Fig. 1)
I.B
TB2
POWER SUPPLY
~(1PHASE)
230V 50Hz
ORN
ORN
YLW
BRN
TB4
INDOOR/OUTDOOR
COMMUNICATION
CN3C
(BLU)
L
N
S1
S2
S3
Please set the voltage using the
remote controller.
For the setting method, please refer to
the indoor unit Installation Manual.
W.B
RU
BZ
LED1
LED2
SW1
SW2
OPTIONAL PART
PCB FOR WIRELESS REMOTE CONTROLLER
RECEIVING UNIT
BUZZER
LED (OPERATION INDICATION : GREEN)
LED (PREPARATION FOR HEATING : ORANGE)
EMERGENCY OPERATION (HEAT / DOWN)
EMERGENCY OPERATION (COOL / UP)
Notes:
1. SymboIs used in wiring diagram above are, : Connector, : Terminal (block).
2. Indoor and outdoor connecting wires have poIarities, make sure to match terminal numbers (S1, S2, S3) for correct wirings.
3. Since the outdoor side electric wiring may change, be sure to check the outdoor unit electric wiring diagram for servicing.
4. This diagram shows the wiring of indoor and outdoor connecting wires (specification of 230V), adopting superimposed system of
power and signal.
+1: When supplying power separately to indoor and outdoor units, refer to Fig 1.
+2: For power supply system of this unit, refer to the caution label located near this diagram.
4-1. INDOOR UNIT
PLA-RP35BA PLA-RP50BA PLA-RP60BA PLA-RP100BA PLA-RP125BA

19
PLA-RP71BA2 PLA-RP100BA2 PLA-RP125BA2
SYMBOL SYMBOLNAME NAME
I.B
INDOOR CONTROLLER BOARD
FUSE (T6.3AL250V)
VARISTOR
SURGE ABSORBER
CONNECTOR (LOSSNAY)
CONNECTOR (REMOTE SWITCH)
CONNECTOR (HA TERMINAL-A)
CONNECTOR (CENTRALLY CONTROL)
POWER SUPPLY (I.B)
POWER SUPPLY (R.B)
TRANSMISSION (INDOOR-OUTDOOR)
RELAY (DRAIN PUMP)
SWITCH (MODEL SELECTION) +See table 1
SWITCH (CAPACITY CODE) +See table 2
CONNECTOR (EMERGENCY OPERATION)
FAN MOTOR
VANE MOTOR
DRAIN-UP MACHINE
DRAIN FLOAT SWITCH
TERMINAL BLOCK (Indoor unit Power (option))
TERMINAL BLOCK (
INDOOR/OUTDOOR CONNECTING LINE )
TERMINAL BLOCK (REMOTE CONTROLLER
TRANSMISSION LINE)
REACTOR
ROOM TEMP. THERMISTOR
(0/ 15kΩ, 25/ 5.4kΩDETECT)
PIPE TEMP. THERMISTOR/LIQUID
(0/ 15kΩ, 25/ 5.4kΩDETECT)
COND. / EVA. TEMP. THERMISTOR
(0/ 15kΩ, 25/ 5.4kΩDETECT)
MF
FUSE
MV
ZNR01,02
DSA
DP
CN2L
FS
CN32
TB2
CN41
CN51
TB4
DCL
LED1
TB5,TB6
LED2
TH1
LED3
X1
TH2
SW1
TH5
SW2
SWE
[LEGEND]
Notes:
1.SymboIs used in wiring diagram above are,
:Connector, : : Terminal (block).
2.Indoor and outdoor connecting wires have poIarities, make sure to
match the terminal numbers (S1, S2, S3) for correct wirings.
3.Since the outdoor side electric wiring may change, be sure to check
the outdoor unit electric wiring for servicing.
4.This diagram shows the wiring of indoor and outdoor connecting
wires.(specification of 230V), adopting superimposed system of
power and signal.
+1:When work to supply power separately to indoor and outdoor
units was applied, refer to Fig 1.
+2:For power supply system of this unit, refer to the caution label
located near this diagram.
Please set the voltage using the
remote controller.
For the setting method, please refer to
the indoor unit Installation Manual.
W.B
RU
BZ
LED1
LED2
SW1
SW2
OPTION PART
PCB FOR WIRELESS REMOTE CONTROLLER
RECEIVING UNIT
BUZZER
LED (OPERATION INDICATION : GREEN)
LED (PREPARATION FOR HEATING : ORANGE)
EMERGENCY OPERATION (HEAT / DOWN)
EMERGENCY OPERATION (COOL / UP)
+Be sure to turn off the power source
and then disconnect fan motor connector.
(Failure to do so will cause trouble in fan motor)
21
1
12
3
51
41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DC325V
X1
DP
MF
D.U.M
CNP
(BLU)
ZNR02
ZNR01
FUSE
DSA
TB4
YLW
ORN
ORN
BRN
YLW
YLW
ORN
OUTDOOR
CN01
(BLK)
INDOOR/OUTDOOR
COMMUNICATION
CN3C
(BLU)
REMOCON
CN22
(BLU) RECTIFICATION
VANE CNV( WHT)
CN32
(WHT)
CN51( WHT)
CN41( WHT)
CN2L
FAN
CNMF
(WHT)
ON
SWE
INTAKE
CN20
(RED)
FLOAT SW
CN4F
(WHT)
LIQUID/PIPE
CN44
(WHT)
Pair No.
J42J41
SW2SW1
Refer to tables 1 and 2.
LED3 LED2 LED1
5555
TH5TH2FS TH1
MVMVMVMV
GRILLE
TB5
DCL
TRANSMISSION
WIRES
DC12V
TO OUTDOOR
UNIT
21
TB6
R.B
I.B
<Table 1>SW1(MODEL SELECTION)
Manufacture/Service
SW1
ON
OFF
12345
<Table 2>SW2(CAPACITY CODE)
Manufacture/ServiceMODELS
SW2
PLA-RP100BA2
ON
OFF
12345
PLA-RP125BA2
ON
OFF
12345
PLA-RP71BA2
ON
OFF
12345
16
13315
LED2
LED1
RU
SW2
SW1
CNB
3
9453
CN3G
M
MT
BZ
W.B
U.B
AUTOMATIC FILTER ELEVATION PANEL
(OPTION PART)
I-SEE
SENSOR
CN4Y
(WHT)
I-SEE
SENSOR MOTOR
CN6Y
(RED)
I-SEE SENSOR
CORNER PANEL
(OPTION PART)
I-SEE
SENSOR
WIRELESS
CN90
(WHT)
AUTO GRILLE
CN3G
(BLK)
AUTO GRILLE
POWER
CNAC
(WHT)
CN3A
13 153
U
U
13
S1
S2
S3
t¡ t¡ t¡
OFF
131414
12 7 4 1
MS
3~
14
1
13
9
M M M M
2
1
TO OUTDOOR UNIT
1
3
5
3
1
CN01
(BLK)
ORN
YLW
BLU
RED
GRN/YLW
I.B
+1(Fig. 1 )
I.B
POWER SUPPLY
~(1PHASE)
230V 50Hz
L
N
ORN
ORN
YLW
BRN
TB4
TB2
S1
S2
S3
INDOOR/OUTDOOR
COMMUNICATION
CN3C(BLU)
M
1~

20
PEAD-RP35EA2 PEAD-RP50EA PEAD-RP60EA PEAD-RP71EA
PEAD-RP100EA2 PEAD-RP125EA
<+A>
N
L
S1
S2
12
21
12
S3
TO CND
TO OUTDOOR
UNIT
TO CN3C
ON
OFF
12345
ON
OFF
12345
ON
OFF
12345
ON
OFF
12345
ON
OFF
12345
ON
OFF
12345
ON
OFF
12345
54321
OFF
ON
50EA
60EA
71EA
35EA( 2 )
100EA( 2 )
125EA
140EA
Capacity cord
switch
Model selection
switch
SW2
SW1
MODELS
POWER SUPPLY
~(1PHASE)
230V 50Hz
(IN CASE OF CONNECTING
THE REPLACEMENT WIRING)
TO OUTDOOR UNIT
TO MA-REMOTE
CONTROLLER
DC8.7-13V
I.B.
X6
X4
X5
X1
ZNR
FUSE
P. B .
CN31
13
DS
INSIDE SECTION OF CONTROL BOX
B
L
U
B
L
U
B
L
UB
L
U
TB5 (RED)
643521
C
MF
X6X5X4
X1
(RED)
CNDK
(BLU)
CNP
(WHT)
FAN
1
Y
L
W
O
R
N
(ORN)
31
CND
2
1
(RED)
LED1
LED2
LED3
CN2L
OFF
ON
SWE
SW2
SW1
(RED) (WHT)
P
N
K
P
N
K
B
L
K
B
L
K
W
H
T
B
L
K
B
L
K
W
H
T
W
H
T
W
H
T
1
231
CN2S CNSK
(WHT) (RED)
YLW
ORN
BRN
B
R
N
O
R
N
(BLU)
WHT
BLK
CN2D
(WHT)
(BLU) (RED) (WHT) (BLK) (WHT) (WHT) (WHT) (YLW) (WHT) (WHT)
+A
DP
643521
2
1
TB4
S3
S1
S2
2
1331
643521
MF
C
12
CN24
321
123
1212 12
TH5TH2TH1
1
2
CN3C
31
1375
CN22 CN20 CN21 CN29 CN31 CN90 CN41 CN51 CN32
2
1123456789 432145321
<PEAD-RP71·100·125·140EA, 100EA2>
External static pressure 130Pa
<PEAD-RP71·100·125·140EA, 100EA2>
External static pressure 70Pa
<PEAD-RP35·50·60EA, 35EA2>
External static pressure 70Pa Optional parts
Optional parts
<PEAD-RP35·50·60EA, 35EA2>
External static pressure 30Pa
(OPTIONAL PARTS)
DRAIN PUMP
RELAY(DRAIN PUMP)
X1
CONNECTOR(WIRELESS) DP
DS
TRANSMISSION(INDOOR·OUTDOOR)
LED3
SWITCH(MODEL SELECTION)
SW1
POWER SUPPLY(REMOTE CONTROLLER)
LED2
LED1 POWER SUPPLY(I.B.)
CN90
CN51
CONNECTOR(CENTRALLY CONTROL)
CN24 CONNECTOR(HEATER)
VARISTOR
FUSE(T6.3AL250V)
ZNR
FUSE
INDOOR POWER BOARD
P. B .
COND./EVA. TEMP. THERMISTOR
(0/15), 25/5.4)DETECT)
PIPE TEMP. THERMISTOR/LIQUID
(0/15), 25/5.4)DETECT)
INTAKE AIR TEMP. THERMISTOR
(0/15), 25/5.4)DETECT)
TERMINAL BLOCK(REMOTE CONTROLLER)
FAN MOTOR
CAPACITOR(FAN MOTOR)
DRAIN SENSOR
DRAIN PUMP
TH5
TH2
TH1
TB5
(INDOOR/OUTDOOR CONNECTING LINE)
TERMINAL BLOCKTB4
MF
C
NAMENAME
SYMBOLSYMBOL
NAME
[LEGEND]
RELAY(FAN MOTOR)
RELAY(FAN MOTOR)
SWITCH(CAPACITY CORD)
CONNECTOR(HA TERMINAL-A)
CONNECTOR(REMOTE SWITCH)
INDOOR CONTROLLER BOARD
RELAY(FAN MOTOR)
SWITCH(EMERGENCY OPERATION)
CONNECTOR(LOSSNAY)
X6
X5
X4
SWE
SW2
CN41
CN32
CN2L
I.B.
SYMBOL
Notes:
1. SymboIs used in wiring diagram above are, : Connector, : Terminal (block).
2. Indoor and outdoor connecting wires have poIarities, make sure to match terminal
numbers (S1, S2, S3) for correct wirings.
3. Since the outdoor side electric wiring may change, be sure to check the outdoor unit
electric wiring diagram for servicing.
4. This diagram shows the wiring of indoor and outdoor connecting wires (specification
of 230V), adopting superimposed system of power and signal.
+1: When supplying power separately to indoor and outdoor units, refer to +A.
+2: For power supply system of this unit, refer to the caution label located near this diagram.