Mocka Inca Entertainment Unit User manual

Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x12
x4
A B C D EFG
HJKL
I
Hardware Supplied
dowel
x20
screw
x4
hinge
x4
O
screw
x24
locking
nut x12
screw
x8
wedge
x4
screw
Phillips & Flathead screwdrivers
bolt
x8
handle
x2
Allen
Key
x1
small
screw
x10
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Insert 4x bolts (C) into panels [4] and [5] as shown. Tighten
with a screwdriver.
.
1
4
5
C
C
C
C
C
C
C
C
C
C
C
C

Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [4] and [5] to panel [7] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Attach panels [3], [4], [5] and [6] to panel [1] with 8x dowels (A) and
secure with 8x locking nuts (D). Tighten with a screwdriver.
3
4
4
5
5
1
6
7
A
A
A
A
D
D
D
D
A
A
A
A
A
A
A
A
D
D
D
D
D
D

Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panel [8] along the grooves between the
panels [3], [4], [5] and [6].
Attach panel [2] to the unit with 8x dowels (A) and secure with 8x
screws (B). Tighten with a screwdriver.
3
3
2
4
4
5
5
6
6
8
B
A
B
B
A
B
B
A
B
B
A
B
B
A
A

Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [9] to panels [10] and panels [11] with 8x bolt (L).
Tighten with an Allen Key (G).
Attach panels [9] to panel [2] with 10x small screw (I). Tighten with
a screwdriver.
2
9
9
10
10
11
11
H
L
G
I
L
LL
L
L
LL
L
I
I
I
I
II
I
I
I
3
9
3
10
3
10
3
9

Inca Entertainment Unit
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 10
Assembly Instructions
Attach 4x hinges (F) to panels [12] and [13] secure with 8x screws (O).
Tighten with a screwdriver.Attach 2x handle (H) to panels [12] and [13]
secure with 4x screws (E). Tighten with a screwdriver.
Attach hinge on panels [3] and [5] to the unit using 16x crews (O).
Tighten with a screwdriver. Ensure the doors open and close easily.
12
13
O
O
O
OO
O
O
O
O
O
H
H
H
E
E
E
E
F
F
F
F
F
F
F
F
O
O
NOTE: If the doors are
uneven or there is a gap
in the middle, loosen or
tighten the screw on the
door hinge until they are
sitting flush.
O
E
E
3
12
3
3
3
5
3
13

Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
K
J
K
J
V
Z
W
V
Z
W
X
Y
Z
wall
anchor
screw
strap
washer
Twist the adjuster make
the top panel is flush.

Inca Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
HOW TO ADJUST THE HINGES TO
ALIGN THE DOORS IF NEEDED.
Open the door.
1. 2. 3.
1. 2. 3.
1. 2. 3.
STEP 1
Adjuse the door panelsupward or downward
STEP 2
Adjuse the flush between door panel and side panel
STEP 3
Adjuse the Gap beteen door
panel and side panel
STEP 4
Loosen this screw a bit. MOVE DOOR BACK OR
FORTH Re-tighten this screw.
Panel
Door
Unscrew 2 screws in round
holes loosen 2 screws in oval
holes a bit.
Tighten 2 screws in oval
holes. Screw in 2 screws in
round holes
MOVE DOOR UPWARD
OR DOWNWARD
MOVE DOOR OUTWARD
by turning this screw
counter-clockwise
KEEP DOOR IN RIGHT
POSITION MOVE DOOR OUTWARD
by turning this screw clockwise