Mocka Livi Bench Seat User manual

Livi Bench Seat
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A B C
Hardware Supplied
50mm
screw x4
30mm
screw x8
60mm
screw x4
E
32mm
screw x2
D
spring washer
x16
F
allen key
x1
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

12
Attach panel [2] to panel [1] using 1x 50mm screw (B) and 1x spring
washer (D). Tighten with the allen key (F). Repeat this step to
assemble the other leg.
Attach the leg panels [1] and [2] to the underside of the bench seat [4] using
8x 30mm screws (C) and 8x spring washers (D). Tighten with the allen
key (F).
Livi Bench Seat
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
F
F
C
D
BD
2
1
4
1
1
2
2

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [3] to the underside of the bench seat [4] and secure
using 4x 60mm screws (A), 4x spring washers (D) and 2x 32mm
screws (E). Tighten with the allen key (F) and a screwdriver as shown.
Carefully turn the bench over onto its legs, ensuring it is balanced and
steady before use. You’re done, enjoy!
Livi Bench Seat
F
A
E
D
3