Mocka Aspen Cot Toddler Bed Conversion User manual

A
Bolt
x6
(COT NOT INCLUDED)
Aspen Cot Toddler Bed Conversion
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
B
Dowel
x2
C
Allen Key
x1

12
2
Aspen Cot Toddler Bed Conversion
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Remove the X and Y screws already installed in the cot with an Allen
Key (C). Please hold onto the X screws as you will need these to install
the conversion.
Insert 2 x Dowels (B) into Panel [2]. Attach Panels [1] to Panel [2] and
secure with 4 x Bolts (A). Tighten with an Allen Key (C).
X
X
Y
Y
Y
Y
X
C
C
A
A
A
A
A
B
B
A
1
1
2

3
3
Aspen Cot Toddler Bed Conversion
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach the conversion to the cot and insert 2x (A) bolts as shown. Insert
the (X) screws that were taken out of your cot through the underside of
the cot side to finish installing your conversion. Tighten with an Allen
key (C). You're done, enjoy!
X
A
A
X
X
C