Mocka Porto User manual

Porto Small Bookcase
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
A1 A2 A3
Phillips screwdriver required
Hardware Supplied Wall Strap
30mm
screw x6
25mm
screw x4
40mm
screw x12
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
B
22mm
screw x1
C
40mm
screw x6
D
nut
x4
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
F1
GH
I F2
14mm
screw x2
wall
anchor x2
safety
strap x2
feet
x4
25mm
screw x2
E
nut
x1
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Porto Small Bookcase
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4x feet (I) to the bottoms of the side panels [3] as shown. Connect the cross bars using 1x 22mm screw (B) and 1x nut (E).
Attach the cross bars to the side panels [3] as shown using 4x 25mm
screws (A3) and 4x nuts (D). Tighten with a screwdriver.
3 3 3 3
I
I
I
I
B
E
A3
D
A3
D
A3 D
A3
D

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach the centre support panels [2] to the side panels [3] using 6x
30mm screws (A2). Tighten with a screwdriver.
Please Note: Lay down unit for easy assembly. Attach the shelves [1]
to the side panel [3] and secure from underneath with 12x 40mm
screws (A1). Tighten with a screwdriver.
2
2
2
Porto Small Bookcase
4
A2
A2
A2
A2
A2
A2
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
1
1
1
3
3
3
3

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Porto Small Bookcase
6
Secure the shelves [1] to the centre support panels [2] with 6x 40mm
screws (C) from underneath. Tighten with a screwdriver.
Lift the completed unit into place, do not drag. Attach 2x safety straps
(H) to the back of the top shelf as shown, and secure with 2x 14mm
screws (F2). Screw the other end of the straps to the wall using 2x wall
anchors (G) and 2x 25mm screws (F1). You’re done, enjoy!
C
C
C
C
C
C
1
1
1
H
F1
G
H
F2
1