Mooreco iTeach Spider User manual

iTeach Spider
UPDATED AS OF: 12/09/2021 1 of 6
INSTRUCCIONES DE ENSEMBLAJE
NO LA TIRE
INSTRUCTIONS DE MONTAGE
NE PAS JETER
ASSEMBLY INSTRUCTIONS
DO NOT THROW AWAY!

Parts List
UPDATED AS OF: 12/09/2021 2 of 6
Hardware
P1 - Base
P2 - Shelf
P3 - Upright
P4 - Cover Panel
P5 - Casters
P6 - Bracket
x1
x1
x2
x1
x4
x2
A - M8 x 25mm Screw
B - M6 x 15mm Screw
C - M6 x 35mm Screw
D - 3/16” Wood Screws
E - Washer
F - #4 Allen Wrench
G - #5 Allen Wrench
H - #17 Wrench
x6
x6
x2
x4
x6
x1
x1
x1

For full product warranty details, please visit:
Para obtener información sobre la garantía del producto, consulte este sitio (ingles):
Pour plus d’informations sur la garantie du produit, consultez ce site (anglais):
To register your product for warranty, please visit:
Para registrar la garantía del producto, vea este sitio (en ingles):
Pour enregistrer la garantie de votre produit, consultez ce site (en anglais):
Review full assembly instructions and
check that all parts are present before
beginning assembly. Heavy or large
furniture may require multiple persons in
order to properly assemble. If you have
questions regarding assembly, contact
the manufacturer before continuing.
Damage due to incorrect assembly may
not be covered by warranty. Do not use
product unless all screws are tight. Check
all screws for tightness at least every
six months. If parts are broken, missing,
damaged, or worn, stop use of the product
until repairs are made by your dealer using
factory authorized parts.
WARNINGS AND DISCLAIMERS
WARRANTY
PRODUCT REGISTRATION
UPDATED AS OF: 12/09/2021 3 of 6
http://moorecoinc.com/warranty
https://moorecoinc.com/register
Find MoreCo iTeach Spider Flat Panel Carts @demco.com,
search iteach spider flat panel cart
Call 800.962.4463 or email cus[email protected]

STEP 1
UPDATED AS OF: 12/09/2021 4 of 6
STEP 2
Flip the base (P1) upside down and screw in the four (4) casters (P5) using the #17
wrench (H).
Screw each upright (P3) into the bade with six (6) “A” screws and 6 Washers (E).
Tighten using the #5 Allen Wrench (G).
P1
P5
A
P3

STEP 3
UPDATED AS OF: 12/09/2021 5 of 6
Use two (2) Brackets (P6) to mount the shelf (P2) to the frame with four (4) “D” screws.
P2
P6
Close-Up

STEP 4
UPDATED AS OF: 12/09/2021 6 of 6
THIS COMPLETES ASSEMBLY INSTRUCTION
P4
B
Slide the cover panel (P4) into the notches in the uprights to hide wires based on planned
TV mounting height.
STEP 5
Tighten four (4) M6x 15mm screws (B) with the #4 allen wrench to secure the cover
panel. Use these to lock the mount in place once installed.