Mophie charge stream vent mount User manual

charge streamTM vent mount
Made for Apple, Samsung,
and other Qi-enabled smartphones
USER MANUAL

2
Welcome
Thank you for purchasing the mophie®charge stream™
vent mount. The charge stream vent mount securely
attaches to your vehicle’s vent and will wirelessly
charge any Qi-enabled smartphone at up to 10W
of power (depending on the device) or any mophie
case with wireless charging.
Package contains
• mophie charge stream vent mount
• Standard vent-clip assembly
• Extended vent-clip assembly
• Dash-mount adapter
• QC 2.0 car charger
• Micro-USB cable
• Alcohol swab
• Quick-start guide
Features
• Universal wireless charging: Wirelessly charges
any Qi-enabled smartphone at up to 10W of
power (depending on the device); charging is
optimized for Apple and Samsung fast charge.
Will also wirelessly charge mophie cases with
wireless charging.
• Easy, one-handed operation: Fixed outer arms
provide leverage so you can easily insert or
remove your phone with just one hand.

3
• Fits most smartphones: Adjustable, rubber-coated
arms rmly hold dierent-sized phones while
they charge. The rubberized charging surface
provides a non-slip grip and won’t scratch
your phone.
• Flexible installation: The supplied standard and
extended vent-clip assemblies let you use the
vent mount with a wide variety of dierent
vent congurations. The supplied dash-mount
adapter lets you use the vent mount in a
convenient location away from a vent.
• Includes QC 2.0 car charger: High-output charger
facilitates a fast, ecient charge.
Compatibility
The mophie charge stream vent mount will wirelessly
charge any Qi-enabled smartphone or any mophie
case with wireless charging. When used with the
supplied QC 2.0 car adapter it will fast charge
compatible Apple and Samsung smartphones at up
to 10W of power (depending on the device). The
charge stream vent mount can also deliver a charge
though cases up to 3mm thick that contain no metal.
Do not attempt to use the charge stream vent mount
with smartphones that are not Qi-enabled.

4
Installation on a vent
Note: If you decide to attach the dash-mount adapter,
see Installing the Dash-mount Adapter, on page 10.
1. Determine which vent-clip assembly (standard
or extended) is needed for proper placement
of the vent mount in your vehicle. Attach the
vent-clip assembly to the back of the vent
mount as shown.
1
Standard Vent Clip
Extended Vent Clip
1
Standard Vent Clip
Extended Vent Clip
1
Standard Vent Clip
Extended Vent Clip
1
Standard Vent Clip Extended Vent Clip
1
Standard Vent Clip
Extended Vent Clip
1
Standard Vent Clip
Extended Vent Clip
1
Standard Vent Clip
Extended Vent Clip
1
Standard Vent Clip
Extended Vent Clip

5
2. Connect the supplied micro-USB cable to
the vent mount’s micro-USB port and to the
supplied QC 2.0 car charger’s USB-A port.
Insert the car charger into your vehicle’s 12-volt
power outlet.
Note: Do not plug the micro USB cable into
a vehicle's USB-A port. The vent mount will
only work properly when it is powered by the
supplied QC 2.0 car charger.
2
12V

6
3. Slide the vent clip mounting ngers over one of
your vehicle’s vent louvers. (You can rotate the
vent clip mounting ngers before installation to
accommodate dierent vent louver thicknesses.)
3
3
3

7
4. Insert your Qi-enabled smartphone or mophie
case with wireless charging into the vent mount.
Press the side of the device against the inside
of the vent mount’s inner arm (A) and push the
device against the charging surface (B). Using
the vent mount’s outer arms for leverage will
make it easy to insert the device into the vent
mount with just one hand.
4
A
B

8
Using the charge stream vent mount
Charging will automatically begin after you insert
your Qi-enabled device in the vent mount with the
center of the device aligned against the center of
the mount.
IMPORTANT: DO NOT DIRECT HEATED AIR FROM
THE VENT ONTO THE VENT MOUNT WHILE IT IS
ATTACHED TO THE VENT—this can damage the vent
mount and an inserted device. When running the
vehicle’s heater, completely close the vent the vent
mount is attached to, or direct the heated air out of
the vehicle’s lower vents and entirely away from the
upper vents.

9
Changing to landscape orientation
1. Remove the vent mount from the vent.
2. Rotate the vent clip 90 degrees. Do not rotate
the vent mount while it is installed on the
vent—you may damage the vent louvre.
1
2
3
1
2
3

10
3. Reinstall the vent mount on the vent in
landscape orientation.
Vent mount charging status indicator
The vent mount has an LED that indicates its
charging status:
• LED illuminated continuously: The wireless
device is properly charging.
• LED ashing: A metallic foreign object (keys,
etc.) has been detected against the charging
pad. Remove the foreign object.
Installing the dash-mount adapter
The supplied dash-mount adapter allows you to
install the charge stream vent mount in a convenient
location away from the vehicle’s vents.
1
2
3

11
Before you begin:
• The dash-mount adapter’s adhesive can only
be used once, so carefully select the mounting
location before adhering the adapter to it.
• The dash-mount adapter’s adhesive is
semi-permanent. If you need to remove the
adapter later on, click here for instructions on
how to properly remove it.
• You can use the dash-mount adapter with either
the standard or the extended vent-clip assembly.
1. Select the mounting location for the adapter.
The location should be at least 2 in x 2 in
(51 mm x 51 mm) and must be at.
2. Use the supplied alcohol swab to clean the
mounting location. Allow it to dry thoroughly
before continuing.
2

12
3. Remove the protective cover from the
dash-mount adapter’s adhesive and rmly press
the adapter onto the cleaned mounting location.
4. VERY IMPORTANT: Before continuing, wait 24
hours to allow the adhesive to fully cure.
3
24
HRS
4

13
5. After the adhesive has cured for 24 hours,
insert the charge stream vent mount into the
dash-mount adapter.
5

14
Taking care of your charge stream vent mount
• Keep your charge stream vent mount dry and
away from moisture and corrosive materials.
• Do not clean your charge stream vent mount
with harsh chemicals, soaps or detergents. Just
wipe it with a soft, water-dampened cloth.
Warranty
At mophie, we are dedicated to making the best
quality products. To back this up, this product is
warranted for 2 years. For full details regarding
warranty terms and exclusions, please visit: mophie.
com/warranty. This warranty does not aect any
statutory rights that you may be entitled to. Keep a
copy of your purchase receipt as proof of purchase.
Be sure to register your product at mophie.com.
Failure to register your product and/or provide proof
of purchase may void the warranty.
Exclusions & limitations
Except for the limited warranty expressly set
forth or to the extent restricted or prohibited by
applicable law, mophie expressly disclaims any and
all other warranties express or implied, including any
warranty of quality, merchantability, or tness for a
particular purpose, and you specically agree that
mophie shall not be liable for any special, incidental,
indirect, punitive, or consequential damages of any
type on any mophie product. In addition to and

15
without limiting the generality of the foregoing
disclaimers, the limited warranty does not, under
any circumstances, cover the replacement or cost of
any electronic device or personal property inside or
outside of the mophie product.
You may have additional warranty rights depending
on your country, state, or province. Further, some
countries, states, and provinces do not allow the
exclusion or limitation of incidental or consequential
damages or exclusions or limitations on the duration
of implied warranties, so the above may not apply
to you. If any provision of the warranty is found
unlawful, void, or unenforceable, that provision
shall be deemed severable and shall not aect any
remaining provision.
Customer service
Telephone: 1-888-8mophie (1-888-866-7443)
International: 1-269-743-1340
Web: www.mophie.com/cs
Warning
Read all instructions and warnings prior to using this
product. Improper use of this product may result in
product damage, excess heat, toxic fumes, re, or
explosion, for which damages you (“Purchaser”), and
not mophie llc (“Manufacturer”) are responsible.

16
NDo not direct heated air from the vent onto the
vent mount while the vent mount is operating.
When running the vehicle’s heater, completely
close the vent the mount is attached to, or
direct the heated air out of the vehicle’s lower
vents and entirely away from the upper vents.
NDo not store device in high-temperature
environment, including heat caused by
intense sunlight or other forms of heat. Do
not place device in re or other excessively
hot environments.
NDo not disassemble this product or attempt to
re-purpose or modify it in any manner.
NDo not attempt to power this device using any
method, apparatus, or connection other than
the device’s micro USB connector. For questions
or instructions for the various ways to power
the device refer to the illustrations in this
user manual.
NDo not attempt to replace any part of this device.
NIf this device is accessible to or may be used
by a minor, purchasing adult agrees to be
solely responsible for providing supervision,
instruction, and warnings. Purchaser agrees
to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising
from unintended use or misuse by a minor.
NAll products have gone through a thorough
quality assurance inspection. If you nd that

17
your device is excessively hot, is emitting odor,
is deformed, abraded, cut, or is experiencing
or demonstrating an abnormal phenomenon,
immediately stop all product use and
contact Manufacturer.
NTo comply with FCC RF exposure compliance
requirements, this wireless charging device
must be used with a separation distance of at
least 10 cm from all persons.
NThis product is intended exclusively for use in
motor vehicles.
Legal
This product is meant for use only in conjunction
with the appropriate device. Please consult your
device packaging to determine whether this
product is compatible with your particular device.
Manufacturer is not responsible for any damages to
any device incurred through the use of this product.
Manufacturer shall not in any way be liable to
you or to any third party for any damages you
or any third party may suer as a result of use,
intended or unintended, or misuse of this product
in conjunction with any device or accessory other
than the appropriate device for which this product
is designed. Manufacturer will not be responsible for
any damages you or any third party may suer as a
result of misuse of this product as outlined above.

18
Purchaser agrees to defend, indemnify, and hold
Manufacturer harmless for any claims or damages
arising from unintended use or misuse, including
use with an unintended device.
mophie, charge stream, Stay Powerful, mophie loves
you, the ve-circles design, and the mophie logo
are trademarks of mophie inc. Apple is a trademark
of Apple Inc. Samsung is a trademark of Samsung
Electronics Co., Ltd. The ‘Qi’ symbol is a trademark of
the Wireless Power Consortium. All rights reserved.
Patents: mophie.com/patents.
This device complies with part 15 of the FCC Rules
and RSS-Gen of IC Rules. Operation is subject to
the following two conditions: (1) This device may
not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,

19
there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced technician
for help.
CAUTION: To comply with the limits of the Class B
digital device, pursuant to Part 15 of the FCC Rules,
this device must be used with certied peripherals
and shielded cables. All peripherals must be shielded
and grounded. Operation with non-certied
peripherals or non-shielded cables may result in
interference to radio or reception.
MODIFICATION: Any changes or modications of this
device could void the warranty.

20
Statement of Compliance
Hereby, ZAGG International declares that the radio
equipment wireless charging pad is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address: http://www.mophie.com/cert_red
WEEE Declaration
All of our products are marked with the WEEE
symbol; this indicates that this product must NOT be
disposed of with other waste. Instead it is the user’s
responsibility to dispose of their waste electrical
and electronic equipment by handing it over to an
approved re-processor, or by returning it to mophie
inc. for reprocessing. For more information about
where you can send your waste equipment for
recycling, please contact mophie inc. or one of your
local distributors.