Morphy Richards IBRB4005 User guide

Morphy Richards products are intended for household
use only. Morphy Richards has a policy of continuous
improvement in product quality and design. The
Company, therefore, reserves the right to change the
specification of its models at any time.
ANX 4 5 Issue 1
4.
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two Year Guarantee
It is in your interest to retain the retailers receipt
as proof of purchase. Please quote the model
number if the product develops a fault. This number
can be found on the handle of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days
of purchase it should be returned to the place of
purchase for it to be replaced.
If a fault develops after 28 days and within 24
months of original purchase, you should contact
the helpline number quoting the model number of
the product, or write to the address below. You
will be asked to return the product (in secure pack-
aging) to the address below along with a copy of
proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:3 -5: Mon-Thur/ 8:3 -4: Fri)
UK (local rate) 845 7777 ,
Republic of Ireland 18 4 9119
Wiring
This product is fitted with a 13A (BS1363) plug.
A 3 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not
suitable for the plug supplied with this appliance
the plug should be removed and the appropriate
one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE
MAINS LEAD, IF SEVERED, MUST BE DE-
STROYED AS A PLUG WITH BARED FLEXIBLE
CORD IS HAZARDOUS IF ENGAGED INTO A LIVE
SOCKET OUTLET.
Mains Lead
As a safety precaution and to prolong the life of
your appliance, do not wrap the mains lead around
the appliance as this will cause damage.
Hair straightener
with interchangeable crimping attachments
MODEL : RB4005
Instructions & Style Guide

Thank you for buying your new Essentials Hair
straightener with interchangeable crimping
attachments from Morphy Richards. Please read
these instructions carefully before use and keep
in a safe place for future reference.
Key Features
Important Safeguards
When using your hair appliance, basic safety
precautions should always be followed.
1 Read all instructions carefully.
2 Use the appliance for its intended use only.
3 To protect against the risk of electric shock,
do not immerse the appliance in water or in
any other liquids.
4 Be sure that your household voltage
corresponds to the voltage marked on the
dryer.
5 Always unplug your appliance when it is not
in use.
6 It is recommended that this appliance should
not be used by children.
7 Do not leave the styler switched on whilst
unattended.
A 3 sets of plates.
· straightener.
· crimper.
·waver.
B Large anodised plates for easier styling.
C Auto temperature control for optimum
safety.
D LED power indicator.
E Stylish metallic finish.
F On/off switch.
G 2 metre salon length cable.
H Release button
Styling
Dry hair thoroughly before using the hair
straightener as dampness can damage your hair
and may also cause your hair to frizz.
Divide your hair into styling sections, brushing
each section through thoroughly.
Clamp a section of the hair between the
straightening plates as close to the roots as
possible, gently and slowly pull the straightener
down your hair shaft to the end .
To crimp sections of your hair, change the plates,
clamp sections of your hair between the plates
and move from section to section down the hair.
To wave sections of your hair, change the plates,
clamp sections of your hair between the plates
and move from section to section down the hair.
The anodised straightening, crimping and waving
plates have been designed to stop your hair from
sticking to the plates.
Styling Tips
Having shampooed your hair, ensure that it is
rinsed properly as shampoo that is left in the hair
will leave it looking dull.
To maximise shine, rinse your hair in cool water
when you have rinsed it thoroughly.
Comb your hair through with a wide toothed
comb to remove tangles before styling.
Dry your hair thoroughly using a Morphy Richards
Hairdryer. By drying your hair thoroughly before
using the crimper/straightener you will avoid
creating frizz.
Avoid using styling products such as hairspray,
gel or mousse before or during styling as it may
cause your hair to stick to the plates.
To change the styling plates
Your Essentials Crimper/Straightener has three
sets of plates. To change the plates unclip the
fitted plates from each heater section by pressing
the release button. Slide the plates from the
heater unit.
Always unplug the unit and allow to cool before
removing or fitting new plates.
A
D
F
waver
straightener
crimper
H