morse 15-SS User manual

The Specialist In Drum Handling Equipment
MODEL 15-SS
Stainless Steel Can Tipper
Contents
Page
Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Assembly Instructions. . . . . . . . . . . . . . . . . . 2
Dimensions. . . . . . . . . . . . . . . . . . . . . . . 3
Parts List and Diagram. . . . . . . . . . . . . . . . . . 3
Operator’s Manual
for Morse Can Tipper
Made of Type 304 Stainless Steel
Model 15-SS
Manufactured 05/2006 to ______
MORSE Mfg. Co., Inc. • 727 West Manlius Street • P.O. Box 518 • East Syracuse, NY 13057-0518
Phone: [phone] • Fax: [phone] • Email: [email protected] • Website: www.MORSEmfgco.com
Copyright 2008 - Morse Mfg. Co., Inc. Form PL15-SS (0506-____) (Updated June 17, 2008 3:10 PM) 1
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
Check for visible damage. If you choose to accept damaged•
freight, always sign noting the damage on the Bill of
Lading.
Document the damage and have the truck driver sign. We•
recommend keeping a digital camera at your receiving dock
for this purpose.
Open packages expeditiously to check the condition of the•
goods. There is only a 24 hour window to notify the carrier
of any concealed damage.
Immediately• report all damage to the shipping company!
Then you may contact Morse for assistance with your
freight claim.
Morse Manufacturing will not be held responsible for any•
damaged freight that is not signed for as damaged.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for two years when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts
carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return
freight must be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for
anymodications,unauthorizedrepairsorpartssubstitution.
Safety Information
While Morse Manufacturing Co. drum handling equipment is
engineeredforsafetyandefciency,ahighdegreeofresponsibility
must be placed upon the machine operator to follow safe practices,
based primarily on common sense, upon which true safety
depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions
as with similar machinery where carelessness in operating or
maintenance is hazardous to personnel. Carefully read the safety
precautions below and throughout this manual.
Review the Material Safety Data Sheet(s) for the material(s) in
the drum(s) and take all necessary precautions. Safety shoes,
work gloves, hard hat and other personal protective devices are
recommended.
Prior to initial use, inspect all moving parts. Perform necessary load
test, inspections, operator training, etc.

The Specialist In Drum Handling Equipment
MODEL 15-SS
Stainless Steel Can Tipper
Operator’s Manual for Morse Model 15-SS Stainless Steel Can Tipper
Manufactured 05/2006 to ______
www.MORSEmfgco.com
Copyright 2008 - Morse Mfg. Co., Inc. Form PL15-SS (0506-____) (Updated June 17, 2008 3:10 PM) 2
Safety Information (continued)
DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.
This signal word is limited to the most extreme situations.
WARNING - Indicates a situation which, if not avoided, could result in serious injury or
death.
CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.
WARNING -DoNotModifytheUnit.UndernocircumstancesshouldanymodicationsbemadetotheMorse
machinerywithoutfactoryauthorization.Anymodicationsmayvoidthewarranty.Thismachinewasdesigned
toperformaspecicjobandalterationsmayresultininjurytooperatorormachine.
WARNING -NoLooseFittingClothingWearclose-ttingclothingandsafetyequipmentappropriatetothejob.
Loosettingclothingmaybecomecaughtonthemachineryandcauseseverepersonalinjury.
CAUTION - Wear safety shoes with non-slip soles and hard toe protection.
CAUTION: DO NOT exceed weight
capacity of 75 Lb.
Assembly Instructions
Unpack and identify the following parts:1.
1 - Can Holder with Catch
1 - Base Assembly
1 - Center Brace
6 - 1/4-20 x 5/8 Panhead Screws
6 - 1/4-20 Two Way Lock Nuts
Spread the base assembly open, hinging at the base2.
riveted joints (see curved arrow A in parts diagram).
Fasten the center brace in place using four screws and3.
nuts as shown. Tighten securely.
Rotate the can holder ring to horizontal position, hinging4.
at the holder riveted joint, with the catch upright as shown
(see curved arrow B in parts diagram).
Place the can holder between the uprights of the base as5.
shown. Insert screws (from inside of ring) through holes in
the can holder ring and through the base uprights. Thread
the nuts onto the bolts but do not tighten completely. The
nuts should be just loose enough to allow the can holder
to pivot freely.
Place a few drops of oil on the pivot bolts before using6.
and reapply oil periodically to minimize wear.
Maintenance
Periodically inspect all moving parts, framework, and1.
contact areas for signs of wear, fatigue, or loosening.

The Specialist In Drum Handling Equipment
MODEL 15-SS
Stainless Steel Can Tipper
Operator’s Manual for Morse Model 15-SS Stainless Steel Can Tipper
Manufactured 05/2006 to ______
www.MORSEmfgco.com
Copyright 2008 - Morse Mfg. Co., Inc. Form PL15-SS (0506-____) (Updated June 17, 2008 3:10 PM) 3
ITEM QTY. PART # DESCRIPTION
1 1 2713-P CAN HOLDER ASM, 15-SS
2 1 4283SS-P CATCH ASM, 15-SS W/ SCREW
3 2 4234-P CAP, PLASTIC, HANDLE, CATCH 15
4 1 2729-P 5/16-18 X 3/4, THUMB, SS
5 6 1518SS-P NUT, 1/4-20 NYLON LOCK, SS
6 6 1517SS-P SCREW, 1/4-20 X 5/8 PAN HD, SS
7 1 4277SS-P BASE ASM, 15-SS
8 1 4281SS-P CENTER BRACE, 15-SS