Motion CM-12 User manual

1
MANUAL CM-12
Hand-held remote 5 channel
English

2
CM-12 is a hand-held remote with 5 channels for operating
and programming blinds at the push of a button. Blinds can
be moved to any desired position or to a preset favourite
position. The wall mounting clip for this remote control is
included by default. For the latest information and updated manuals,
visit rtube.nl/cm-12
5 433.925 MHz 2.32dBm CR2430
3.0V 120 mm 45 mm 14 mm -10°C~50°C
Channels Max.
blinds
Frequency Range Frequency
emission power
Power
supply
Length Width Height Working
temperature
Certificates
unlimited
30 m with
1 concrete
wall

3
Safety
WARNING: Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
Do not let children play with the blind and/or remote control.
Take care that the blind can move freely and is not blocked by any
objects.
Do not paint the device.
Keep the device dry.
Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards.
Do not ingest battery, Chemical Burn Hazard
This product contains a coin / button cell battery. If the coin /
button cell battery is swallowed, it can cause severe internal burns
in just 2 hours and can lead to death.
Keep new and used batteries away from children.If the battery
compartment does not close securely, stop using the product and
keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate
medical attention.
Replacement of a battery with an incorrect type that can defeat
a safeguard.
Disposal of a battery into fire or a hot oven, or mechanically crush-
ing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas.

4
Cleaning
Follow these general rules when cleaning the outside of the device
and its components:
Use a damp, soft, lint-free cloth. Avoid getting moisture in
openings.
Do not use aerosol sprays, solvents, alcohol, or abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding the
limited warranty. No user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the product appears to be
damaged or does not function properly, go to your local dealer for
instructions on how to obtain warranty service.
Recycle
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collec-tion systems or contact the retailer where the product
was purchased. They can take this product for environmental safe
recycling.

5
EU Declaration
Hereby, Coulisse declares that the radio equipment type CM-12 is in
compliance whith directive 2014/53/EU. The full text of the EU dec-
laration of conformity is available at the following internet address:
www.my.coulisse.com
FCC Manual I FCC ID: ZY4CM12
Regulatory Information
1 FCC Information for User
This product does not contain any user-serviceable components
and is to be used with approved antennas only. Any product
changes or modifications will invalidate all applicable regulatory
certifications and approvals.
2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

6
1. This device may not cause harmful interference
2. This device must accept any interference received, including
interference that may cause undesired operation.
3 FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses
and can radiate radio-frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area may cause
harmful interference, in which case the user will be required to
correct the interference at their own expense. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna
Increase the distance separating the equipment and receiver
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

7
1
1. BUTTONS
Buttons
Up
Right
Down
Channel
Selection
Left
Centre
(stop/favourite)
Pair
button
The center button has two functions: press to stop the blind,
hold to move the blind to its favorite position.
Channel
indicator

8
2
+
-
Changing the battery When the channel indicator is flashing at a high frequency,
the battery needs to be replaced.
2. CHANGING THE BATTERY
CR2430 3,0V

9
3Remote holder Different materials require different types of fittings.
Always choose screws and plugs that are specially suited
to the material.
3. REMOTE HOLDER

10
4Pair a remote
4. PAIR A REMOTE

11
4.1
4.2
4.3
Repeat steps 4.1 - 4.3 to remove a blind from a channel.
4. PAIR A REMOTE
Shortly press the program button on the motor. The
blind will start stepping, indicating that program mode
has been activated.
(The blind keeps stepping until the program mode is
deactivated)
Press the pair button on the back of the remote
control to pair the blind with the selected channel.
The blind will shortly stop stepping, indicating that
the remote has been paired with the blind.
Select a desired channel for the blind using the channel
selection button on the remote control.
Pair
button
Channel indicator
Channel Selection

12
1
1
5
5.1 5.2 5.3
Single select makes it possible to activate program mode on
a single blind through a remote control, without having to
physically press the program button on the blind.
Single select 5 channel remote
+
The remote
starts searching
for blinds (search
mode). This is
indicated by the
LEDs flashing
from left to right.
To activate
Single select,
simultaneously
hold the centre
button and press
the pair button.
Once a blind is found,
the channel LED will
flash and the blind
starts stepping,
indicating that program
mode has been
activated. The blind
can now be (un)paired
with the remote and/or
programmed.
5. SINGLE SELECT 5 CHANNEL REMOTE

13
5.4 5.5 To exit Single select,
press the right button
during search mode.
5. SINGLE SELECT 5 CHANNEL REMOTE
To search for the next
blind, press the right
button. Search mode will
be activated.
To find the previous blind,
press the left button.

14
6
6.1 6.2
Channel select makes it possible to copy blinds in between
channels/remotes without having to physically press the
program button on the motors.
Select the
channel from
which the
blinds must
be copied.
To activate channel
select, simultaneously
hold the channel
selection button and
press the pair button.
6. CHANNEL SELECT 5 CHANNEL REMOTE
+
Channel select 5 channel remote

15
6.3 6.4 6.5
6. CHANNEL SELECT 5 CHANNEL REMOTE
All blinds in the selected
channel will start stepping,
indicating program mode has
been activated. All blinds can be
copied to a new channel on the
same remote or other remote.
Select a new channel on the
(new) remote.
Press the pair button
on the (new) remote to
pair the blinds with the
new channel.
To exit channel select,
go back to the channel
selected at step 6.1
and repeat step 6.2

16
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form, by any means, electronic, mechanical, photocopying,
recording, digital or otherwise without the written permission of the publisher.
Although this manual has been composed with the utmost care, Coulisse b.v. does not
accept any responsibility for damage due to mistakes and/or faults in this manual.
Coulisse b.v. reserves the right to revise the manual and to revise and/or change its
content at any time, without obligation to notify any person or entity of such revisions
or changes.

17
Deutsch
HANDBUCH CM-12
Handfernbedienung 5 Kanäle

18
CM-12 ist eine Fernbedienung mit 5 Kanälen zur Steuerung
und Programmierung von Rollos durch Knopfdruck.
Rollos können in jede gewünschte Position oder in eine
voreingestellte Lieblingsposition versetzt werden. Die
Befestigungsklemme zur Anbringung an der Wand wird
standardmäßig mitgeliefert. Für mehr Informationen und aktualisiert Bedienungs-
anleitungen besuchen Sie bitte rtube.nl/cm-12
5 433.925 MHz 2.32dBm CR2430
3.0V 120 mm 45 mm 14 mm -10°C~50°C
Kanäle Max.
Rollos
Frequenz Bereich Frequenz
Sende leistung
Strom-
quelle
Länge Breite Höhe Arbeits-
temperatur
Zertifikate
unbe-
grenzt
30 m mit
1 konkreten
Wand

19
Sicherheit
WARNUNG: Wichtige Sicherheitshinweise Befolgen Sie sämtliche
Hinweise, da eine fehlerhafte Installation zu ernsten Verletzungen
führen kann.
Lassen Sie Kinder nicht mit dem Rollo und/oder der Fernbedie-
nung spielen.
Achten Sie darauf, dass das Rollo sich frei bewegen kann und nicht
durch Objekte blockiert wird.
Streichen Sie das Gerät nicht über.
Halten Sie das Gerät trocken.
Lassen Sie das Gerät nicht fallen. Schlagen Sie nicht darauf und
schütteln Sie es nicht. Durch groben Umgang können interne
Leiterplatten beschädigt werden.
Batterie nicht verschlucken, Gefahr von Verätzungen durch
Chemikalien
Dieses Produkt enthält eine Knopfzellenbatterie. Wenn eine
Knopfzellenbatterie verschluckt wird, kann sie in nur 2 Stunden
schwere innere Verbrennungen verursachen und zum Tod führen.
Halten Sie neue und gebrauchte Batterien von Kindern fern. Wenn
sich das Batteriefach nicht sicher schließen lässt, stellen Sie die
Verwendung des Produkts ein und halten Sie es von Kindern
fern. Wenn Sie glauben, dass Batterien verschluckt oder in einen
Körperteil eingeführt worden sein könnten, suchen Sie sofort einen
Arzt auf.
Ersetzen einer Batterie durch einen falschen Typ, wodurch eventu-
ell eine Sicherung umgangen wird.
Entsorgung einer Batterie ins Feuer oder in einen heißen Ofen
oder das mechanische Zerkleinern oder Zerschneiden einer Batte-
rie, was zu einer Explosion führen kann.

20
Der Verbleib einer Batterie in einer Umgebung mit extrem
hohen Umgebungstemperaturen, kann zu einer Explosion oder
zum Auslaufen von brennbarer Flüssigkeit oder Gas führen.
Eine Batterie, die extrem niedrigem Luftdruck ausgesetzt ist,
kann zu einer Explosion oder zum Auslaufen von brennbarer
Flüssigkeit oder Gas führen.
Reinigung
Befolgen Sie bei der Reinigung des Geräts und der einzelnen Kompo-
nenten diese allgemeinen Regeln:
Verwenden Sie ein feuchtes, weiches und fusselfreies Tuch. Ach-
ten Sie darauf, dass keine Feuchtigkeit in Öffnungen eindringt.
Verwenden Sie keine Sprays, Lösungsmittel, Alkohol oder Scheuer-
mittel.
Service & Support
Führen Sie Reparaturen nie selbst durch. Versuchen Sie nicht, das
Gerät zu öffnen oder auseinanderzunehmen. Sie riskieren einen
Elektroschock und setzen gegebenenfalls die Garantie außer Kraft.
Es befinden sich keine durch den Benutzer zu wartenden Teile im
Inneren des Geräts .
Garantieservice
Folgen Sie zunächst den Hinweisen dieser Bedienungsanleitung.
Sollte das Produkt beschädigt sein oder nicht korrekt funktionieren,
wenden Sie sich bitte an einen Vertragshändler vor Ort, um gegebe-
nenfalls die Produktgarantie in Anspruch zu nehmen.
Recycle
Diese Kennzeichnung weist darauf hin, dass dieses Produkt in