Motoalliance DENALI MA11759 User manual

866.527.7637 1 [e-mail]
23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637
www.motoalliance.com
DENALI Plow Mount
MA11759
Odes Dominator X and Raider
Thank you for purchasing a DENALI plow mount. You now own a premium, custom
plow mount to allow you to use your plow with your UTV/SxS. Please note the following
instructions and heed all warnings.
Your UTV/SxS and/or plow system can cause death or injury. Please use caution
and common sense when operating your unit.
Read your Plow Operator Manual, your Winch Operator Manual, and all warning
labels before operating your UTV/SxS.
Operate your UTV/SxS at a walking speed with the blade installed. Do not
exceed 5 mph (8 km/h) even with the blade up.
Do not operate the UTV/SxS on slopes greater than 10 degrees with the plow
installed.
Always lower the plow to the down position before leaving your UTV/SxS
unattended.
SEVERE INJURY OR DEATH MAY RESULT IF YOU ARE NEGLIGENT.

MA11759
23001 Industrial Blvd
DENALI Odes Dominator X and Raider Plow Mount Rogers, MN 55374
866.527.7637
866.527.7637 2 [e-mail]
Please verify that all hardware and parts are included in your package.
Kit Contents:
Part #
Qty
Description
1
1
MA11759 Plow Mount
2
4
M10-1.25 x 25mm HH Bolt
3
4
M10 Lock Washer
4
4
M10 Flat Washer
MA11759 Plow Mount Assembly View

MA11759
23001 Industrial Blvd
DENALI Odes Dominator X and Raider Plow Mount Rogers, MN 55374
866.527.7637
866.527.7637 3 [e-mail]
1. Position the MA11759 Plow Mount (part# 1) over the rectangular tube frame at the
front of the Odes Dominator X or Odes Raider as shown in Figure 1.
Figure 1
2. From the bottom of the MA11759 Plow Mount insert the included M10-1.25x25mm
Hex Bolts (part# 2), M10 Lock Washers (part# 3) and M10 Flat washers (part# 4) in
the orientation shown in MA11759 Plow Mount Assembly View.
3. Tighten all hardware.
4. Attach the DENALI Plow system using the two quick release pins included in your
plow kit as shown in Figure 2.

MA11759
23001 Industrial Blvd
DENALI Odes Dominator X and Raider Plow Mount Rogers, MN 55374
866.527.7637
866.527.7637 4 [e-mail]
Figure 2
5. Following the first plow session, ensure that all hardware is tightened.