Motoalliance MA11767 User manual

866.527.7637 1 [e-mail]
23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637
www.motoalliance.com
MOTOALLIANCE PLOW MOUNT
MA11767
CFMOTO Z-Force 500/800
Thank you for purchasing our MotoAlliance plow mount. You now own a premium
custom plow mount allowing you to use your plow with your SxS. Please note the
following instructions and heed all warnings.
•Please use common sense when operating your SxS
•Be observant of moving parts causing entanglement use extreme caution!
SEVERE INJURY OR DEATH MAY RESULT IF YOU ARE NEGLIGENT.

MotoAlliance
MA11767 CFMOTO Z-Force 500/800 23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637 2 [e-mail]
Please verify that all hardware and parts are included in your package.
Kit Content:
Item Number
Description
Quantity
1
MA11767 Main Mounting Plate
1
2
3/8” -16 x 1.5” ID Ubolt (for 1” pipe)
4
3
3/8"-16 Serrated Flange Nut
4
Figure 1

MotoAlliance
MA11767 CFMOTO Z-Force 500/800 23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637 3 [e-mail]
1. Lift the MA11767 Mounting Plate into place under the front bumper as shown in
Figure 2.
Figure 2
2. Hang two of the 3/8”-16 x 1.5” ID Ubolts over the vertical bumper tubes and push
them through the front of the MA11767 Main Mounting Plate as shown in Figures
2 and 3.
Figure 3

MotoAlliance
MA11767 CFMOTO Z-Force 500/800 23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637 4 [e-mail]
3. Secure with 3/8”-16 Serrated Flange Nuts but do not tighten at this time.
4. Lift the back of the MA11767 Main Mounting Plate into place and secure with
3/8”-16 x 1.5” ID Ubolts and 3/8”-16 Serrated Flange Nuts as shown in Figure 4.
Figure 4
5. Verify the mount is square and tighten down all hardware.
6. Attach the plow using the quick release pins included with DENALI Plow Kits.
After First Time Use
After the first use of your plow, check and retighten all hardware at least once, in case
your frame has flexed and the Plow Mount has loosened.