Motocaddy M3 GPS User manual

EN
REGISTERONLINE
www.motocaddy.com/warranty
Visit www.motocaddy.com/instructions for other Motocaddy instructions including translations
Distance Measurement Device (DMD) features are legal to use when local USGA and R&A
rule 4.3 is in effect. Always check local and competition rules prior to commencing play
IMPORTANT: Scan the QR code to ensure
that your M3 GPS software remains up to
date and performance is always optimised
M3 GPS / M3 GPS DHC Electric Trolley
Instruction Manual

Page 2
Contents
Registration / Serial Number / Information about DHC.........3
Safe Use / Trolley Care.................................................................4
Trolley Care / Battery Care & Advice..........................................5
Charging Instructions / Lithium Battery Care ..........................6
Lithium Battery Care .....................................................................7
Attaching the Wheels / Inverting the Wheels...........................8
Front Wheel Alignment.................................................................9
Unfolding your Trolley................................................................ 10
Folding your Trolley.................................................................... 11
Upper & Lower Bag Supports................................................... 12
Adjusting the Bag Supports...................................................... 13
Equipment Overview.................................................................. 14
Starting, Stopping & Changing Speed .................................... 15
Battery Meter / USB Charging.................................................. 16
Adjustable Distance Control..................................................... 17
Introduction to GPS Mode / Using GPS Mode...................... 18
GPS Mode Overview .................................................................. 19
Clock / Round Timer.................................................................. 20
Hole Advancement / Tee Selection......................................... 21
Shot Measurement / Units of Measure................................. 22
Hazard Information.................................................................... 23
AED Locator & CPR Instructions / Ending your Round....... 24
Smartphone Notications / Enabling Bluetooth .................. 25
Installing the Motocaddy App ................................................... 26
Smartphone Pairing ................................................................... 27
Notication Settings / Notication Stacking......................... 28
Firmware Updates...................................................................... 29
Course Updates .......................................................................... 30
Language Settings / Competition Mode................................ 31
Factory Reset / Demo Mode .................................................... 32
Introduction to DHC / Parking Brake ...................................... 33
FCC Statement............................................................................ 34
Declaration of Conformity......................................................... 35

Page 3
Software Updates / Locating your Serial Number / Information about DHC
Locating your Serial Number
The serial number for this M-Series trolley is located on the trolley underside next to the motor (g. 1).
This number is required when registering your warranty online and should be kept handy for future use.
The same number should also be on the box received with your trolley. Please ensure you keep hold of the
packaging in case you need to return your trolley for any reason. A proof of purchase must also be kept in
case your trolley requires servicing during its warranty period.
Fig 1
IMPORTANT - Software Updates
The M3 GPS has been developed to allow course and system updates via the Motocaddy App or using the enclosed
USB cable. It is recommended that you always use the latest rmware version to enable you to take advantage of
bug xes and system improvements. You can register your email address to join our dedicated M3 GPS mailing list
by scanning the QR code or visiting www.motocaddy.com/m3gps.
Please keep a record of your trolley serial number here for future reference:
MCM
Information about DHC (Downhill Control) models
The information in this instruction manual applies to both standard and DHC electric trolley models. For DHC specic functionality,
please turn to page 33.

Page 4
Safe use of your Trolley / Trolley Care
Safety cut-out
This Motocaddy trolley is tted with a timed safety cut-out feature. Once started the trolley will automatically cut power to the
motor after ten minutes to prevent any possible damage to the trolley. Pressing the 'On/Off' button will restart the trolley.
Safe use of your Trolley
Motocaddy trolleys are designed for the transportation of golf bags and clubs contained within. Using the trolley for any other
purpose may cause damage to the trolley and cause harm to the user.
• Do not attempt to transport any other equipment
• The trolley is not designed for the transportation of people
• Do not use the trolley to assist you when going up hills
• Submerging the trolley in water (e.g. a lake) is likely to cause damage to the trolley
• Do not operate the trolley whilst under the influence of drugs or excessive amounts of alcohol
• All batteries must be disconnected from the trolley before folding, storage and transportation
Caring for your Trolley
Although your Motocaddy trolley has been weatherproofed, please follow these simple guidelines to help protect your trolley:
• Do not store your trolley outside
• Try to minimise exposure to rain as much as possible with an umbrella during heavy rainfall
• Wipe excess water from the trolley prior to storage
• Never use a pressure washer to clean your trolley. To prevent water damage, wipe down with a damp cloth
• Avoid using high pressure air hoses near moving components
• Avoid exposure to items which may scratch, damage or exert excessive force on the LCD display

Page 5
Trolley Care / Battery Care & Advice
This Motocaddy trolley is designed to require very little maintenance. We do however recommend giving your trolley regular
checks to ensure:
• There is no build up of excess mud and dirt
• The front wheel nut is on tightly and quick release lever is clamped down
• The front wheel is not clogged up and turns freely
Only original Motocaddy parts should be used when repairing your trolley.
Battery Care & Advice
All batteries must be charged as soon as possible after each use. Leaving batteries discharged for long periods of time will affect
the battery life.
Please ensure that only batteries supplied by Motocaddy are charged with Motocaddy chargers. Cyclic battery chargers are
designed specically in accordance with the battery manufacturer’s requirements. The Lithium battery charger MUST NOT be
used to charge any other battery and is designed for use with Motocaddy Lithium batteries only.
The charger should only be connected to an earthed socket outlet; the battery charger should only be opened and maintained by
authorised personnel. Unauthorised opening will invalidate your warranty.
The battery must be stored and charged on a dry non-carpeted surface and charged at temperatures ranging between 10°C and
30°C. Charging above or below these temperatures is not recommended as it can reduce the battery capacity.
When connecting your battery to the trolley, please ensure that the connections match up black to black and grey to grey.

Page 6
Charging your Lithium Battery / Lithium Battery Care
Charging your Lithium Battery
1. Unplug the Lithium battery from the trolley. This should always be performed before folding the trolley to avoid damage
to the battery and/or trolley
2. Plug the charger into your mains supply
3. Attach the battery cable to the charger matching black to black and grey to grey
4. When the charging LED indicator has turned green, the battery is fully charged and ready to be used
RED - Battery charging GREEN - Battery fully charged and ready to be disconnected
5. The charging process will take between 3 to 5 hours depending on the depth of discharge
(Please be aware that this may take longer for the rst few charges)
6. Once charging is complete please disconnect the charger from the mains power supply
7. Finally disconnect the charger from the battery
If you connect the battery to the charger and the LED goes out, this is likely to indicate that the battery is fully charged.
Please double check the battery on the trolley to ensure that it is fully working.
Caring for your Lithium Battery
• Try to avoid getting the battery too wet (i.e. do not submerge the battery, avoid deep puddles and do not clean your trolley
whilst the battery is still in the battery tray)
• Dropping the battery may cause damage to the internal cells
• Do not lift or carry the battery by the cable
• Use a damp cloth to clean off any dirt

Page 7
Lithium Battery Care
Recommendations for hibernation of Lithium Batteries during winter months
If for any reason your Lithium battery is not going to be used for lengthy periods, e.g. 3 months over the winter, it is advised to
store the battery half charged. To do this simply use the battery for a round of golf as usual and charge it for 1.5 hours at the end
of the round. Before the battery is used again, recharge it (top it up) prior to use.
We recognise that extended absences are not always planned in advance, however when it is likely that you will not be using your
battery for a period of time it is good practice to follow these steps to extend the life of your Lithium battery. Please ensure that the
charger is ALWAYS disconnected from the battery after charging.
Battery Management System (BMS)
Motocaddy Lithium batteries are tted with a comprehensive battery management system (BMS) to protect the battery from
excessive abuse, high currents, deep discharge and overcharge. When the battery is delivered there may be no output as the BMS
is designed to maximize safety whilst shipping. Please ensure that the battery is fully charged prior to connecting it to your trolley
as this will activate the BMS and effectively ‘switch-on’ the battery. From time to time, at deep discharge or long term storage the
BMS may switch-off the battery. A full battery charge will rectify this problem.
Motocaddy golf trolleys are designed to work with the BMS system installed in the Lithium batteries and the voltage meter is
also synchronised to work in conjunction with the battery. If for any reason the voltage on the battery falls below the low battery
warning on the trolley, then the BMS may disable the battery to protect it. Again if this occurs please recharge fully. Please be
aware that Lithium batteries tend to ‘drop off’ quickly at the end of the cycle so it is not advisable to attempt to play excessive
holes as the BMS will activate for protection purposes.

Page 8
Attaching the Wheels / Inverting the Wheels
Attaching the Wheels
The M3 GPS trolley does not have a specic left and right wheel.
To attach the rear wheels, follow these simple steps:
1. Push the quick release button in towards the centre of the wheel
2. Slide the wheel onto the trolley axle as far as it will go (onto the inner groove)
3. Once in position, release the button and pull the wheel outwards slightly to lock
4. An audible ‘click’ will conrm the wheel is in the correct position
The outer groove can be used as a “free-wheel” option if you run out of battery power.
To check you have attached the wheels correctly onto the inner groove, you will nd they will not rotate freely in either direction.
Inverting the Wheels
The wheels can be inverted to reduce the trolley width for transportation and storage.
1. Push and hold the quick release button while sliding the wheel off the axle
2. Flip the wheel over, push and hold the button, then slide onto the axle
3. Release the button and pull the wheel out slightly until it engages with the free wheel groove

Page 9
Front Wheel Alignment
Adjusting the Front Wheel Alignment
In the unlikely event that your trolley is not tracking in a straight line, the alignment of the front wheel can
be adjusted to rectify the fault. This problem can be caused by a number of factors including a slightly
loose bag support or an unevenly packed golf bag.
To alter the alignment of the front wheel, follow these simple steps:
1. Lift the quick release lever positioned on the front wheel housing and loosen the wheel nut (g. 1)
2. There are two small metal dials on either side of the housing that are used to realign the wheel (g. 2)
3. If your trolley is veering to the right, you will need to turn the left hand dial clockwise and the right
hand dial anti-clockwise
4. If your trolley is veering to the left, you will need to turn the right hand dial clockwise and the left hand
dial anti-clockwise
5. Tighten the wheel nut and push down the lever to lock the wheel back into place (g. 3)
This procedure can be carried out until you are happy the trolley is moving in a straight line
(please note you may only need to adjust one dial at a time).
These instructions are based on positioning yourself in front of the trolley looking at the wheel.
Fig 2
Fig 3
Fig 1

Page 10
Unfolding your Trolley
Unfolding your Trolley
We recommend unfolding your trolley once the wheels have been un-inverted and re-attached (see page 8).
1. Lift the upper bag support slightly and release the upper latch (g. 1)
2. Unfold the handle and re-secure the latch (g. 2)
3. Release the lower latch (g. 3)
4. Lift the trolley handle up into position (g. 4). The front wheel will automatically unfold
5. Re-secure the lower latch and ensure the auto-open stand is folded away (g. 5)
Fig 1 Fig 2 Fig 3 Fig 4 Fig 5