Motorline professional MF1 User manual

EXTERNAL PHOTOELECTRIC CELL MF1
Modulated infrared barrier .
Operating with opposed transmitter and receiver. Double safety relais (one energised and one not energised).
Technical data:
- Range “ nominal ” : 8 meters
- Range “ max.” . : 14 meters
- Power supply : 12-24V AC-DC
- Consumption pair ( IT + IR ) : 2 W
- Working temperature : -10 55 °C
- Box : polycarbonate
- Protection degree : IP 54
- Dimensions : see fig. 1
IT 2135 Transmitter:
- Modulation frequency : 1000Hz
- Infrared wave length : 950nm
IR 2135 Receiver:
- Relais contacts : 1A max a 30 VDC
-Output contact normally open : NA
-Output contact normally closed : NC
-Red Led that is on when the photocells are aligned.
Fig. 1
Terminal board connections: (fig. 2)
TX RX
Fig. 2
Rev. 1.1 del 27-02-2007

Insta ation:
•Open the photocell box and connect the cables to the terminal board following the scheme (fig. 2).
•When the transmitter is aligned with the receiver (the receiver is equipped with a red internal pilot lamp that is on when both
photocells are aligned) fix the back side of the box to the wall through the three A slots (fig. 3).
•Fix the cover of the box through the B tongues and the C screws (fig. 3).
Fig. 3
Stateurop hereby declares that the product below: MF1 complies with the specifications of Directive E C
2004/108/EC.
Rev. 1.1 del 27-02-2007