Motorola V1100 User manual

10 Learning to Use Your Phone
54 Learning to Use Your Phone
10Learn ing to Us e Your Phone
See page 1 for a basic phone diagram.
10.1 Using the Display
The home screen is displayed when you are not on a call or
using the menu. You must be in the home screen to dial a
phone number. To dial a number from the home screen,
press the number keys and .
Note: Your home screen may look different from the display
shown above, depending on your service provider.
Labels at the bottom corners of the display show the current
soft key functions. Press the left soft key or right soft key to
perform the function indicated by the left or right soft key
label. For soft key locations see page 1.
The following status indicators can display:
1. Signal Strength Indicator
Vertical bars show the strength of the network connection.
You cannot make or receive calls when the (no signal)
indicator or (no transmit) indicator is displayed.
Date
Left Soft Key
Label
Clock
Right Soft Key
Label
Vodafone
18/07/06
Menu Music
Press S
right to see
more news,
if available.
News and graphics from
your Service Provider
12:00
Vodafone
18/07/06
Menu Music
News and graphics from
your Service Provider
12:00
5. Active
Line
1. Signal
Strength
2. GPRS
3. Data
4. Roam 7. Messages
8. Ring Style
9. Battery
Level
6. Messaging
Presence
S
V1100.3G.UG.book Page 54 Wednesday, August 9, 2006 4:19 PM

Using the Display 10.1
Learning to Use Your Phone 55
2. GPRS Indicator
Shows that your phone is using a high-speed General
Packet Radio Service (GPRS) network connection.
GPRS allows faster data transfer speeds. Indicators
can include:
3. Data Transmission Indicator
Shows connection and data transmission status. Indicators
can include:
4. Roam Indicator
Shows when your phone is seeking or using another
network outside your home network. Indicators can
include:
= GPRS PDP context
activate
= GPRS attach
= GPRS packet data
available
= secure packet data
transfer
= unsecure packet data
transfer
= secure application
connection
= unsecure application
connection
= secure Circuit Switch
Data (CSD) call
= unsecure CSD call
= BluetoothTM
connection is active
= HSDPA home = HSDPA roam
= 3G home = 3G roam
= 2.5G home = 2.5G roam
= 2G home = 2G roam
V1100.3G.UG.book Page 55 Wednesday, August 9, 2006 4:19 PM

10.1 Using the Display
56 Learning to Use Your Phone
5. Active Line Indicator
Shows to indicate an active call, or to indicate
when call diverting is on. Icons for dual-line SIM
cards can include:
6. Messaging Presence Indicator
Shows when Instant Messaging (IM) is active.
Indicators can include:
When a Java application is active, can display here.
7. Message Indicator
Displays when you receive a new message. Indicators
can include:
8. Ring Style Indicator
Shows the ring style setting.
9. Battery Level Indicator
Vertical bars show the battery charge level. Recharge the
battery when Low Battery displays and the battery alert
sounds.
= line 1 active = line 2 active
= line 1 active, call
divert on
= line 2 active, call
divert on
= IM active = invisible to IM
= busy
= text message = voicemail message
= voice and text
message = IM message
= loud ring = soft ring
= vibrate and ring = vibrate then ring
= vibrate = silent
V1100.3G.UG.book Page 56 Wednesday, August 9, 2006 4:19 PM

Using the 5-Way Navigation Key 10.2
Learning to Use Your Phone 57
10.2 Using the 5-Way Navigation Key
Use the 5-way navigation key
(S) to scroll up, down, left, or
right in the menu system. Press
the centre of the key (s) to
select a highlighted menu item.
10.3 Using Menus
From the home screen, press sto enter the main menu.
Press Sto scroll to and highlight a menu feature icon in the
main menu. The following icons may display in the main
menu, depending on your service provider and service
subscription options.
Select Back
Messaging
Select
highlighted
menu
feature.
Scroll up,
down, left, or
right. Press
centre to
select
highlighted
menu
feature.
Exit any menu
without
making
changes.
Name of
Highlighted
Menu
Feature Icon
V1100.3G.UG.book Page 57 Wednesday, August 9, 2006 4:19 PM

10.3.1 Selecting a Menu Feature
58 Learning to Use Your Phone
10.3.1 Selecting a Menu Feature
To select a menu feature, starting from the home screen:
This example shows that from the home screen, you must
press sto open the menu, highlight and select
Calls >Options >Filter by >Dialled Numbers, then highlight and
select the call.
Press the navigation key (S) up, down, left or right to
highlight items, and press it in (s) to select items. Press
the left/right soft keys to select the functions listed in the
bottom left and right corners of the display.
10.3.2 Selecting a Feature Option
Some features require you to select an option from a list:
•Press Sto scroll up or down to highlight the option
you want.
•In a numbered list, press a number key to highlight the
option.
•In an alphabetised list, press a key repeatedly to cycle
through the letters on the key and highlight the closest
matching list option.
Icon Feature Icon Feature
Entertainment Organiser & Tools
Vodafone live! Contacts
Music SIM Tool Kit
Camera Connectivity
Messaging Calls
My Files Settings
Find the Feature sCalls >Options >Filter by
>Dialled Numbers
Press the
Options key to
see the
sub-menu
Options Back
Dialled Numbers
Highlighted
Option
Press S to
scroll down to
other options.
10] John Smith
9] Lisa Owns
8] Adda Thomas
7] Jack Bradshaw
6] Dave Thompson
5] John Smith
4] John Smith
3] John Smith
V1100.3G.UG.book Page 58 Wednesday, August 9, 2006 4:19 PM

Smart Key 10.4
Learning to Use Your Phone 59
•When an option has a list of possible values, press S
left or right to scroll through and select a value.
•When an option has a list of possible numeric values,
press a number key to set the value.
10.4 Smart Key
The smart key gives you another way to do things. For
example, when you highlight a menu item, you can press the
smart key to select it (instead of pressing s). The smart
key usually does the same thing as s. To find the smart
key, see page 1. To change what the smart key does in the
home screen, see page 85.
10.5 External Display
When you close your phone, the external display shows the
time, date, status indicators, and notifications for incoming
calls and other events. After your phone is inactive for a
while, the display shows only a clock. For a list of phone
status indicators, see page 54.
To set the phone ring style in the external display:
1Press a volume key to see Ring Styles.
2Press the smart key repeatedly, until the style you want
appears.
3Press a volume key to return to the home screen.
10.6 Using the Handsfree Speaker
When you activate your phone’s integrated handsfree
speaker, you can talk to the other party without holding the
phone to your ear.
Press the Speaker key to turn the handsfree speaker on or off
during a call.
When you turn the handsfree speaker on, your phone
displays Speakerphone On in the home screen. The handsfree
speaker remains on until you press the Speaker key again or
turn the phone off.
Note: The handsfree speaker is disabled when you connect
your phone to a handsfree car kit or headset accessory.
10.7 Changing a Code, PIN, or Password
Your phone’s 4-digit unlock code is originally set to 1234,
and the 6-digit security code is originally set to 000000. Your
V1100.3G.UG.book Page 59 Wednesday, August 9, 2006 4:19 PM

10.8 Locking and Unlocking Your Phone
60 Learning to Use Your Phone
service provider may reset these codes before you receive
your phone.
If your service provider has not reset these codes, we
recommend that you change them to prevent others from
accessing your personal information. The unlock code must
contain 4 digits, and the security code must contain 6 digits.
You can also reset your SIM card PIN code or PIN2 code, if
necessary. Your Personal Identification Number (PIN) code
protects the information stored on your SIM card.
To change a code or password:
10.8 Locking and Unlocking Your Phone
You can lock your phone manually or set the phone to lock
automatically whenever you turn it off.
To use a locked phone, you must enter the unlock code. A
locked phone still rings or vibrates for incoming calls or
messages, but you must unlock it to answer.
You can make emergency calls on your phone even when it
is locked (see page 70).
10.8.1 Locking Your Phone Manually
10.8.2 Unlocking Your Phone
Your phone’s unlock code is originally set to 1234. Many
service providers reset the unlock code to the last 4 digits of
your phone number.
At the Enter Unlock Code prompt:
Find the Feature s>Settings > Security
>New Passwords
Find the Feature s>Settings > Security
>Phone Lock > Lock Now
Press To
1keypad keys enter your unlock code
2Ok key lock the phone
Press To
1keypad keys enter your unlock code
2Ok key unlock your phone
V1100.3G.UG.book Page 60 Wednesday, August 9, 2006 4:19 PM

Setting Your Phone to Lock Automatically 10.8.3
Learning to Use Your Phone 61
10.8.3 Setting Your Phone to Lock
Automatically
You can set your phone to lock every time you turn it off:
10.9 If You Forget a Code, PIN, or
Password
Your phone’s 4-digit unlock code is originally set to 1234,
and the 6-digit security code is originally set to 000000.
Many service providers reset the unlock code to the last 4
digits of your phone number before you receive your phone.
If you forget your unlock code, try entering 1234 or the last 4
digits of your phone number. If that does not work, at the
Enter Unlock Code prompt:
If you forget your security code, SIM card PIN code or PIN2
code, contact your service provider.
Find the Feature s>Settings > Security
>Phone Lock > Automatic Lock
>On
Press To
1keypad keys enter your unlock code
2Ok key activate automatic lock
Press To
1sdisplay the unlock code bypass
screen
2keypad keys enter your 6 digit security code
3Ok key submit your security code
V1100.3G.UG.book Page 61 Wednesday, August 9, 2006 4:19 PM

11 Setting Up Your Phone
62 Setting Up Your Phone
11Settin g Up Your Phon e
11.1 Storing Your Name and Phone
Number
To store or edit your name and phone number information
on your SIM card:
Shortcut: Press K#from the home screen to view or
edit your name and phone number.
Tip: If you want to see your phone number while you are on a
call press Options > My Tel. Numbers.
If you do not know your phone number, contact your service
provider.
11.2 Setting the Time and Date
Your phone uses the time and date for the Calendar.
To synchronise the time and date with the network,
press s> Settings > Initial Setup > Time and Date >
Autoupdate > On.T
To manually set the time and date, turn off Autoupdate, then,
press s> Settings > Initial Setup > Time and Date > time or date.
To choose an analogue or digital clock for your home screen,
press s> Settings > Personalise > Home Screen > Clock.
To turn the date on or off on your home screen, press s
>Settings > Personalise > Home Screen > Date.
11.3 Setting a Ring Style
Your phone rings or vibrates to notify you of an incoming call
or other event. This ring or vibration is called an alert.
You can select one of five different ring styles. The ring style
indicator in the display shows the current ring style (see
page 56).
To set a ring style:
Find the Feature s>Settings > Phone Status
>My Tel. Numbers
Find the Feature s>Settings > Initial Setup
>Time and Date Find the Feature s>Settings > Ring Styles
>Style:style name
V1100.3G.UG.book Page 62 Wednesday, August 9, 2006 4:19 PM

Ring & Event Lights 11.4
Setting Up Your Phone 63
Each ring style contains settings for specific event alerts,
ringer ID, and ringer and keypad volume. To change these
settings, press s>Settings > Ring Styles >style Details.
•If you select the Silent ring style, your phone will not use
Auto Answer (see page 88).
•Java™ applications can make your phone vibrate or
light up. You can turn off App Vibration and App Backlight
under s>Settings >Java Settings.
•To change your ringer volume when your phone is
closed, see page 59.
•To turn off alerts for messages that arrive during a call,
select s>Settings >In-Call Setup > MSG Alert >Not in Call.
11.4 Ring & Event Lights
Your phone has lights on the outside
that can pulse for incoming calls or
messages.
To set the light for your incoming
calls, press s>Settings
>Ring Styles >Ring Lights.
To set the light for your incoming
messages, press s>Settings
>Ring Styles >Event Lights.
11.5 Setting a Wallpaper Image
You can set a photo, picture, or animation as a wallpaper
(background) image in your phone’s home screen. The
wallpaper image displays as a faint watermark in text and
menu displays.
When you set an animation as a wallpaper image, only the
first frame of the animation displays.
Press To
1Sup or down scroll to the ring style
2Select key select the ring style
Find the Feature s>Settings > Personalise
>Wallpaper
V1100.3G.UG.book Page 63 Wednesday, August 9, 2006 4:19 PM