Motorola XT720 User manual

APPLICANT: MOTOROLA INC. FCC ID: IHDP56KC3
EXHIBIT 8
INSTRUCTION MANUAL
A preliminary draft of the User’s Manual follows this page.
The text on the following is the user manual.

Welcome
Thank you for purchasing Motorola mobile phone with world leading mobile communication technology. Motorola’s mobile communication
equipment are designed and produced in compliance with its strict in-house standards and the international standards.
They are subject to the strict quality tests including temperature, humidity, shock, dust, vibration and drop tests. We are confident that you will be
highly satisfied with the Motorola products that have been manufactured after such processes. Thank you again for choosing Motorola, and we
hope that you would succeed in your business with your XT720.
※Some of the contents and the functions in this manual subject to change without prior notice according to situation.
※We suggest that you set your phone on vibration at a public place.

Prohibition of Illegal IMEI Modification
Removal or change of IMEI (International Mobile Equipment identity) installed in the mobile phone manufactured and supplied by Motorola, or and
attempt to reproduce and enter another IMEI in the mobile phone is strictly prohibited. In addition, such an illegal act may damage the software
installed in the phone. Therefore, customers should care so that you do not damage your phone due to such an illegal act. The product which is
illegally modified is excluded from any free or paid service warranted by Motorola.

Safety Information
Read this ‘Safety information’ carefully for your own safety and to prevent possible property damage.
CAUTION
● Do not lend your phone to other person.
● Follow appropriate cell phone etiquette in public places.
● If any problem occurs with your phone, contact designated service center.
● If your phone is lost or stolen, report your mobile service provider immediately.
● Do not use unauthorized devices with your phone.
- Unauthorized battery charger, stereo earphone, USB data cable, batteries or any other unauthorized devices may decrease your product’s
performance and may result in product malfunction.
● Do not use your earphone for extended hours.
- If you are exposed to loud sound for extended period of time, it may damage your hearing.
● Make sure to record important data separately.
- Saved phone numbers or other data can get lost due to user’s carelessness or other unexpected problems.
● Make sure to keep your phone in dry places (with relatively low humidity) at all time.
- If either mobile phone or battery is immersed in ‘liquid’, the color of immersion-checking label attached on your mobile phone or battery will be
changed. In this case, you will loose the privilege of receiving free service by Motorola.
●For normal operation of the touchscreen, do not attach any protection film. Also, be careful with the moisture and use the touchscreen with clean
and dry hands.
●This product should not be added with any separate equipment that may cause an alteration to its original performance as described on type
registration

CAUTION FOR USING BATTERY
Please keep the following directions to avoid of heating, fire and explosion.
● Contact the manufacturer or retail store immediately when you find swollen battery which can be dangerous.
●Use authentic charger only.
● Do not place the battery near the heating apparatus. (Do not put the battery in microwave.)
●In summer, do not place the battery in the car.
●Do not place or use the battery where the temperature is high and humid places such as spa.
● Do not let metal products such as necklace, coin, key and watch contact the battery terminal.
●Use lithium battery guaranteed by carrying device manufacture company.
● Do not disjoint, compress or penetrate the battery.
●Do not give strong impact such as dropping the battery.
● Do not expose the battery over 60°C.
●Make sure the battery does not get wet.
RECOMMENDED GUIDELINE FOR CHARGING METHOD
●Do not charge the battery in the way which is not in the user’s manual.
- Fire or explosion may occur.

Safety Information
Safety and General Information
Safet y In form ati on
This section contains important information on the safe and
efficient operation of your mobile device. Read this
information before using your mobile device.
Exposure to Radio Frequency (RF)
Energy
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your mobile device, the system handling your call controls the
power level at which your mobile device transmits.
Your Motorola mobile device is designed to comply with local
regulatory requirements in your country concerning exposure of
human beings to RF energy.
Operational Precautions
For optimal mobile device performance, and to be sure that human
exposure to RF energy does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions.
Product Operation
When placing or receiving a phone call, hold your mobile device
just like you would a landline phone.
If you wear the mobile device on your body, always place the
mobile device in a Motorola-supplied or approved clip, holder,
holster, case, or body harness. If you do not use a body-worn
accessory supplied or approved by Motorola, keep the mobile
device and its antenna at least 2.5 centimeters (1 inch) from your
body when transmitting.
Using accessories not supplied or approved by Motorola may
cause your mobile device to exceed RF energy exposure
guidelines. For a list of Motorola-supplied or approved
accessories, visit our Web site at:
www.motorola.com .
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed, or
otherwise configured for RF energy compatibility. In some
circumstances your mobile device may cause interference with
other devices.

FCC Notice to Users
FCC Notice
The following statement applies to all products that have
received FCC approval. Applicable products bear the FCC
logo, and/or an FCC ID in the format FCC-ID:xxxxxx on the
product label.
Motorola has not approved any changes or modifications to this
device by the user. Any changes or modifications could void the
user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

ÔSafety Information (cont’d)
To use the mobile phone safely for a long time
Use authentic products only.
Using unauthorized products (battery, charger etc.) may shorten product’s life or decrease its performance.
Be careful not to cause damages to the glass of mobile phone display.
Some part of your mobile device is made out of tempered glass. This glass could break if the product is dropped on a hard surface or receives a
substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service
center.
Do not dry your mobile phone with a heating apparatus.
If you dry a wet mobile phone or battery with a heating apparatus may cause explosion or damage to your phone. In this case, do not turn on the
power, separate a battery from the phone and contact a service center designated by Motorola.
Keep the mobile phone clean at all time.
•If there are foreign substances on a metal part of a charger or battery, the phone may not be charged properly.
•Use smooth cloth to clean the mobile phone and do not use flammable chemicals (such as alcohol, benzene, thinner, etc.)for cleaning.

Do not give strong impact to the mobile phone, disassemble or modify it.
Giving a strong impact or dropping the mobile phone or battery may cause malfunction or explosion.
In case of disassembling or modifying the mobile phone on your own discretion, you will lose privilege to receive free service.
Do not use the phone while charging.
If you use the mobile phone while charging it with a charger or USB data cable, there is a risk of electric shock or fire. Make sure that you use the
phone after disconnecting it from USB data cable or charger.
Be cautious when you use an USB data cable.
If you connect the phone with PC via USB data cable, there is a risk of electric shock depending on the grounding status of the PC’s power supply.
Do not place your phone near items containing magnetic components.
Placing the phone near magnetic components may cause product malfunction or cause battery discharge which can lead to performance decrease.

ÔSafety Information (cont’d)
To use the mobile phone safely for a long time
Make sure to back-up all the data stored in your mobile phone.
•Saved data (such as phone number or pictures etc.) can be deleted unexpectedly due to user’s carelessness, software upgrade or product repair
etc.
•Manufacturer shall not be responsible for such data loss.
Use and keep the phone at room temperature.
If a mobile phone or battery is placed in a hot or cold place, it may shorten product’s life or decrease its performance.
Keep the phone out of animal or children’s reach.
If children or animals suck or bite the mobile phone or battery, they may run into a risk of having an electric shock or exposure to electromagnetic
wave.
Be careful when you use a necklace or cord for the mobile phone.
Be careful that using a necklace or cord for the mobile phone may cause you to run into dangerous accidents like being caught in train, electric
railway or car doors.
Do not paint or put sticker on your mobile phone.
•Such action may damage your phone’s joints and your phone may not open or close properly.
•Paint or metallic content on the phone may cause an allergic reaction, eczema, itching, swell, etc.

Do not paint or put sticker on your mobile phone.
•Such action may damage your phone’s joints and your phone may not open or close properly.
•Paint or metallic content on the phone may cause an allergic reaction, eczema, itching, swell, etc.
Keep the phone, charger and battery out of children’s reach.
•If they put battery in their mouth or use damaged battery, it may harm their body and there is risk of electric shock or danger of exposure to electric
magnetic wave.
•Make sure children do not swallow any parts of the phone such as covers. It may stuck on their throat or cause them to suffocate.
Do not place your phone near credit card, phone card, bank book or other materials that uses magnetic strip.
Your phone may damage the magnetic strip.
Do not hold or block the intenna with your body during a call.
•If you hold the bottom part of the phone (where intenna is located) during a call or data transfer, it may decrease the performance.
•If you attach materials (such as metallic stickers) that may effect intenna, it may decrease the quality of the call.

ÔSafety Information (cont’d)
To use the mobile phone safely for a long time
Do not use the mobile phone in a place with risk of explosion.
In a construction sites and military areas, explosives can be controlled with RF devices. Turn off your phone and follow the proper instructions and
signals.
Do not use the mobile phone near inflammable materials.
Do not use your phone or attach accessories on it in a potentially explosive atmosphere including gas station, gas leaking areas, and deck on boats.
Do not use the mobile phone in a prohibited area such as air plane and hospitals.
Radio frequency emitted from your phone may affect some of the devices used in an air plane or hospitals and cause accidents.
Do not use the mobile phone near pacemakers.
•Electromagnetic waves from your mobile phone may affect pacemaker when it is used within 15cm (6 inches) from it.
•If it is necessary, person with pacemaker should always use the phone in the opposite side of the pacemaker and keep the distance over 15cm.

A chargeable battery is consumable.
The repetition of charging/discharging will shorten its operation time gradually.
When the phone is not being charged properly, lamp on the charger will blink.
Check the charger to avoid the trouble that may occur to each device.
Mobile phone and battery cover need to be combined at all time.
If not, it may cause malfunction.
In case of separating a battery from the mobile phone, please turn off the power.
If not, it may cause malfunction.

ÔSafety Information (cont’d)
To use the mobile phone safely for a long time
Make sure to charge the battery with the TTA authorized battery charger.
Using unauthorized charger may cause damage to your phone.
Keep your phone at room temperature of 0℃~40℃, avoid direct sunlight or place with high temperature and
humidity.
If not, it may damage the phone and cause the phone to explode.
Do not place the phone in areas that may get very hot, such as microwave or near heating apparatus.
There is a risk of explosion or fire.
Ensure that charging terminal of the battery does not make contact with other metallic objects such as necklace,
coins and keys.
There is a risk of explosion or fire.

Do not use the mobile phone while driving.
•Using the mobile phone while driving a car is dangerous and such action can cause car accidents.
•Check the local laws and regulations on using the mobile phones while driving.
Do not install a hands-free device near air bag.
An air bag inflates with great force in a moment. Do not leave your phone or set up the hands-free kit near to the air bag. You may be seriously
injured when the air bag is activated.
Your phone checks battery temperature on its own for your safety. When the temperature of the battery raises over 55℃, phone will automatically
stop all the functions and notify you to place the phone in cooler area with a pop-up message. Pop-up message will appear every 3 minutes when
the temperature of the battery is between 55℃to 58℃.
When the temperature pass over 58℃, your phone will automatically turns in to cool down mode.
※What is cool down mode?
It is a state where you can only make emergency calls and your phone will stop all the functions until the
temperature of the battery becomes lower than 50℃.
When the temperature becomes lower than 50℃, your phone will notify you in a pop-up message that your phone is back
to normal.

CONTENTS PAGE(S)
Before Use
Components
Parts of the Phone
Battery

Components
Before using your phone, make sure you have all the components included in your package.
Image
TBA
Mobile phone Battery cover Standard battery Battery charger Car charger Universal
docking
Image TBA
Multi adapter USB data cable Stereo earphone DMB antenna Personality piece User guide
•Above illustration may look slightly different and the supplied items may change without notice.
•If you attach the multi adapter to the ‘accessory connector’, be careful not to loose the body of the multi adapter.
•If you contact 5 PIN terminal of basic components such as Multi adapter and USB Data cable to the PC’s USB port, your PC may malfunction
(Power off, Reset).
•You can purchase HDMI cable and 3.5mm TV-Out cable separately from Motorola’s on-line store.

Parts of the Phone
Earphone Rear camera
Front camera Secondary mic
Light sensor
Touch screen Flash
Battery cover
Touch buttons
:Menu button
: Home button
: Back button
: Search button
Speaker

ÔParts of the Phone (cont’d)
(1) Accessory connector
(2) External connector port
(3) HDMI port
(4) 3.5 mm Earphone port
(5) Power button
(6) TDMB antenna port
(7) Volume button
(8) Camera option button
- Press to select from album, capture preview or recording preview.
(9) Camera button
13
45
6
2
7
8
9

Battery
Battery in the package is not fully charged therefore make sure to fully charge the battery.
Installing the battery Removing the battery
1. Put the battery with the battery charge
terminal and the phone charge terminal
engaged as shown in the figure.
1. Push the battery cover (in the direction
of the arrow as shown in the figure) while
pressing the battery cover release button.
2. Put the battery properly in the battery
slot. Push it until it clicks.
2. Lift up the battery as shown in the
figure.
3. Place the battery cover to the battery
cover groove.
Push the battery cover (in the direction of
the arrow as shown in the figure) until it
clicks.
3. Remove the battery from the phone.
Caution
Make sure that the power is off when you remove the battery.
- If you remove the battery while the phone is on, it may damage your phone.