Moxa Technologies MIINEPORT E1 User manual

1www.moxa.com [email protected]
Serial-to-Ethernet Solutions
MiiNePort E1 Series
The MiiNe was created to provide
manufacturers with a competitive
embedded serial-to-Ethernet solution.
The MiiNePort E1, which uses the
MiiNe for its SoC, is one of the world’s tiniest embedded device
servers, and has the lowest power consumption of any similar product.
The MiiNe has the following features:
Designed for 1 or 2-port serial-to-Ethernet applications•
Uses a 32-bit ARM 7 core•
Uses Moxa’s own advanced UART technology•
Has 2 MB Flash and 4 MB SDRAM memory built in•
Moxa’s NetEZ technology gives serial device manufacturers a range of powerful tools for integrating
Ethernet capability into serial devices:
The MiiNe—Moxa’s 2nd Generation SoC
10/100 Mbps embedded serial device servers
Same size as an RJ45 connector—only 33.9 x 16.25 x 13.5 mm›
Extremely low power consumption—only 160 mA @ 3.3 VDC input›
Uses the MiiNe, Moxa’s second generation SoC›
NetEZ technology makes integration incredibly easy›
Versatile choice of operation modes: Real COM, RFC2217, TCP, TCP,›
and UDP
Moxa’s MiiNePort E1 embedded device servers are designed for
manufacturers who want to add sophisticated network connectivity
to their serial devices with minimal integration effort. The MiiNePort
E1 is empowered by the MiiNe, Moxa’s second generation SoC, which
supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate,
a versatile selection of ready-to-use operation modes, and requires
Overview
only a small amount of power. By using Moxa’s innovative NetEZ
technology, the MiiNePort E1 can be used to convert any device with
a standard serial interface to an Ethernet enabled device in no time. In
addition, the MiiNePort E1 is the size of an RJ45 connector, making it
easy to fit into virtually any existing serial device.
NetEZ Technology
SCM:• Need an easy tool to configure the network through serial
communication inside the device? Try MiiNePort’s friendly SCM
(Serial Command Mode).
EXTrigger:• Want to troubleshoot your network with ease? Use the
MiiNePort’s EXTrigger button to reset network settings with just
one push.

2www.moxa.com [email protected]
Serial-to-Ethernet Solutions
Dimensions
13.5 mm
(0.53 in)
24.54 mm (0.97 in)
4 mm
(0.16 in)
1.5 mm
(0.06 in)
33.9 mm (1.33 in)
11.8 mm (0.47 in)
ø3.25 mm (ø0.13 in)
ø0.9 mm (ø0.04 in)
10.84 mm
(0.43 in)
10.84 mm
(0.43 in)
6.35 mm (0.25 in)
2.54 mm (0.1 in)
33.9 mm (1.33 in)
2.54 mm (0.1 in)
1.27 mm (0.05 in)
4.85 mm (0.19 in)
ø1 mm (0.04 in)
24.1 mm (0.95 in)
16.25 mm (0.64 in)
1.5 mm (0.06 in)
16.25 mm (0.64 in) 14.52 mm (0.57 in) 3.3 mm (0.13 in)
12.3 mm (0.48in)
13.5 mm (0.53 in)
18.22 mm (0.72 in)
AutoCFG:• Tired of spending a large amount of time and effort
setting up a network? Not anymore! The MiiNePort’s AutoCFG
makes auto-configuration during manufacturing possible.
MCSC:• Ever wanted your device to be a server and client at the
same time? The MiiNePort’s MCSC (Multi-channel Serial
Communication) provides dual connections and dual channels for
multi-task applications!.
Moxa’s NetEZ technology makes the MiiNePort E1 the world’s most user-friendly embedded device server by promising ease-of-use with minimal
integration work required.

3www.moxa.com [email protected]
Serial-to-Ethernet Solutions
Pin Assignment
Pin Function Pin Function
1 GND 5 Data In
2 VCC 6 Ready/RTSa
3 Reset 7 DIOb
4 Data Out 8 CTSc
a. Pin 6 can be configured as Ready/RTS (Request to Send), Ready/DO, or
RS-485 Tx Enabled (default is Ready/RTS)
b. Pin 7 can be configured as DIO, Modem Control Out, RS-485 Tx Enable, or
Reset to Default (default is DIO)
c. Pin 8 can be configured as CTS (Clear to Send), DI, or Modem Control In
(default is CTS)
The MiiNePort E1 Starter Kit includes the MiiNePort E1 module, an
evaluation board, power adaptor, software, and serial and Ethernet
cables to allow quick and easy evaluation of all embedded device
server functions. The evaluation board is equipped with serial,
Ethernet, digital I/O, and power circuits to help you test your
MiiNePort E1 modules and applications.
MiiNePort E1 Starter Kit
Cross-over
Ethernet Cable
Null Modem Cable
Power Cord
(US or Euro plug)
Document &
Software CD
Power Adaptor
(90 to 240 VAC,
12 VDC)
Evaluation Board
Recommended PC Board Layout
32.4 mm (1.28 in)
3.58 mm (0.14 in)
16.05 mm (0.63 in)
12.3 mm
(0.48 in)
2.54 mm (0.1 in)
1.27 mm (0.05 in)
22.74 mm (0.9 in)
19.73 mm (0.78 in)
17.19 mm(0.68 in)
1.5 mm (0.06 in)
ø1.1 mm (ø0.04 in)
2-ø1.6 mm (ø0.06 in)
8-ø0.9 mm (ø0.04 in)
2-ø3.25 mm (ø0.13 in)
10.84 mm
(0.43 in)
1.5 mm
(0.06 in)

4
Serial-to-Ethernet Solutions
© Moxa Inc. All Rights Reserved. Updated Aug. 14, 2009. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Specifications
Ordering Information
Package Checklist (modules)
MiiNePort E1 Series module•
Package Checklist (starter kits)
MiiNePort E1 module•
MiiNePort E1-ST evaluation board•
Universal power adaptor•
2 power cords•
Null modem cable•
Cross-over Ethernet cable•
Document and Software CD•
Quick Installation Guide•
Warranty Card•
Available Modules
MiiNePort E1: Embedded device server for TTL devices, drop-in module, 10/100M with
RJ45 connector, 0 to 55°C operating temperature
MiiNePort E1-T: Embedded device server for TTL devices, drop-in module, 10/100M
with RJ45 connector, -40 to 85°C operating temperature
Available Starter Kits
MiiNePort E1-ST: Starter kit for the MiiNePort E1 Series, module included
MiiNePort E1-ST (w/o module): Starter kit for the MiiNePort E1 Series, module not
included
Form Factor
Type: Drop-in module
Dimensions: 33.9 x 16.25 x 13.5 mm (13.35 x 6.4 x 5.31 in)
Weight: 9 g
System Information
CPU: 32-bit ARM 7 Core
RAM: 4 MB built in
Flash: 2 MB built in
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: RJ45 (with magnetics)
Magnetic Isolation Protection: 1.5 KV built-in
LEDs: 10BASE-T & 100BASE-TX Link Activity, Fault/In-Use
Serial Interface
Number of Ports: 1
Transmission Format: Standard TTL
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
Baudrate: 50 bps to 230.4 Kbps* (supports non-standard
baudrates)
* Baudrates up to 921.6 Kbps available by request
Serial Signals
TTL: TxD, RxD, RTS, CTS, RST (reset circuit), GND
Digital I/O Pins
GPIO: 3 programmable I/O pins (1 DO, 1 DI, 1 DI/O)
Software
Network Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP
V1/V2c, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration Options: Web Console, Serial Console (Serial
Command Mode), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95, 98, ME, NT, 2000, XP
x86/x64, 2003 x86/x64, Vista x86/x64, 2008 x86/x64, Embedded CE
5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, SVR
4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x
Operation Modes: TCP Server, TCP Client, UDP, Real COM mode,
Modem Mode, RFC2217
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Operating Humidity: 5 to 95% RH
Storage Temperature: -40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage: 3.3 VDC (±5%)
Power Consumption: 160 mA @ 3.3 VDC max.
Regulatory Approvals
EMC:
•Radiated&conductedemissions:ComplieswithClassBlimitsof
EN55022:1998
•Direct&IndirectESD:ComplieswithEN55024:1998
•ElectricalFastTransient/BurstImmunity:Complieswith
EN55024:1998
•PowerFrequencyMagneticFieldImmunity:Complieswith
EN55024:1998
Shock: 500 g’s for non-operational shock
Vibration: 20 g’s for non-operational vibration
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty