mru AMPRO 2000 User manual

AMPRO 2000
Using Bluetooth with the MRU4u app
MRU Instruments, Inc. / 13514 Breakwater Path Loop / Houston, Texas 77044 / Tel.: [phone]
BLUETOOTH
This app is available for both Android and iOS.
Download the MRU4u app from the Play-store or
APP-store.

AMPRO 2000
Using Bluetooth with the MRU4u app
MRU Instruments, Inc. / 13514 Breakwater Path Loop / Houston, Texas 77044 / Tel.: [phone]
Make sure your analyzer has the correct Bluetooth settings!
Measurement menu
Press F3 (extras)
Extras menu
Press OK for settings
Settings screen
Press F2 for Bluetooth
BT-LE for iOS
Modify with arrow
left/right
The following steps have
been performed by us
already, but have be
repeated once you change
any settings!
BT
-
CL for Android
Modify with arrow
left/right
Scroll down to device info
Press OK
Press the folder button
Select Bluetooth
and press OK
Press the folder button Select initialize
and press OK
Restart the analyzer
You must restart the analyzer once you have modified any of these parameters!

AMPRO 2000
Using Bluetooth with the MRU4u app
MRU Instruments, Inc. / 13514 Breakwater Path Loop / Houston, Texas 77044 / Tel.: [phone]
Pairing your analyzer with your Smartphone - Activate Bluetooth in your phone
You can't connect your phone to the analyzer if another phone is already paired with the analyzer!
You have to disconnect any other devices that are paired with your phone (e.g. Bluetooth headset)!
Activate Bluetooth on your phone Search for available devices Pair with the MRU analyzer
Pin will be requested for older units Enter PIN 0000 or 1234 Analyzer and phone are paired

AMPRO 2000
Using Bluetooth with the MRU4u app
MRU Instruments, Inc. / 13514 Breakwater Path Loop / Houston, Texas 77044 / Tel.: [phone]
Start the MRU4u on your phone Press connect and measure Press connect device
Select your device Confirm with OK
If this screen stays empty, another phone might already be paired. Disconnect the other phone first!

AMPRO 2000
Using Bluetooth with the MRU4u app
MRU Instruments, Inc. / 13514 Breakwater Path Loop / Houston, Texas 77044 / Tel.: [phone]
Taking a measurement / adding parameters
Screen while analyzer is zeroing Screen zeroing completed
Press to modify screen
contents
Select and then press Done
Press +for additional parameters
Select the parameter you wish to
add. Repeat this step for each
additional parameter
Press "Done" to return to
measurement screen
Press "Stop" to stop the
measurement