MSI IA-Q45 User manual

IA-Q45
MS-9876 (v1.x) Industrial Computer Board

ii
Preface ▍
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR IN-
TERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
MSI®is registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA®is registered trademark of NVIDIA Corporation.
ATI®is registered trademark of ATI Technologies, Inc.
AMD®is registered trademarks of AMD Corporation.
Intel®is registered trademarks of Intel Corporation.
Windows®is registered trademarks of Microsoft Corporation.
AMI®is registered trademark of Advanced Micro Devices, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster®is registered trademark of Creative Technology Ltd.
Realtek®is registered trademark of Realtek Semiconductor Corporation.
JMicron®is registered trademark of JMicron Technology Corporation.
Netware®is a registered trademark of Novell, Inc.
Revision History
Revision Revision History Date
V1.0 For PCB v1.x August 2010
Technical Support
If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor. Alterna-
tively, please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates,
driver updates, and other information: http://www.msi.com/index.
php?func=service
Contact our technical staff at: http://ocss.msi.com
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◙
◙

iii
MS-9876
Safety Instructions
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable at surface before setting it up.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or mod-
ule.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that could damage or cause electri-
cal shock.
If any of the following situations arises, get the equipment checked by ser-
vice personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according
to User’s Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-
TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-
AGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情
況下，使用者會被要求採取某些適當的對策。
廢電池請回收
For better environmental protection, waste batteries should be
collected separately for recycling special disposal.
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◯
◯
◯
◯
◯
◯
￭

iv
Preface ▍
FCC-B Radio Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
◯
◯
◯
◯
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that
may cause undesired operation.
1)
2)
Micro-Star International
MS-9876

v
MS-9876
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must remind
you that...
Under the European Union (“EU”) Directive on Waste Electrical and Electronic
Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,
products of “electrical and electronic equipment” cannot be discarded as municipal waste
anymore and manufacturers of covered electronic equipment will be obligated to take back
such products at the end of their useful life. MSI will comply with the product take back
requirements at the end of life of MSI-branded products that are sold into the EU. You can
return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-
und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat
europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu-
ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück-
zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich
an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques
et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits
électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-
ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer
certains produits en n de vie. MSI prendra en compte cette exigence relative au retour des
produits en n de vie au sein de la communauté européenne. Par conséquent vous pouvez
retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005
года, изделия, относящиеся к электрическому и электронному оборудованию, не могут
рассматриваться как бытовой мусор, поэтому производители вышеперечисленного
электронного оборудования обязаны принимать его для переработки по окончании
срока службы. MSI обязуется соблюдать требования по приему продукции, проданной
под маркой MSI на территории EC, в переработку по окончании срока службы. Вы
можете вернуть эти изделия в специализированные пункты приема.

vi
Preface ▍
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos
electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasicados
como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores
habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a
hacerse cargo de dichos productos al termino de su período de vida. MSI estará com-
prometido con los términos de recogida de sus productos vendidos en la Unión Europea
al nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio
establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para
la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en
Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen
niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten wor-
den verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal
overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen
en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inza-
melingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini,
MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva
2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elek-
tronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači
ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog
veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao
vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na
lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI przy-
pomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektryc-
znych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005,
tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane
jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbi-
erania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania
UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia.
Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

vii
MS-9876
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-
rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elek-
tronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreti-
cileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin
geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına
bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se
tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-
jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az
MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-
tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és
elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen
elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére
azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos
követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében,
azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed
Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla
categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come riuti
municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla ne del
suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che
sono stati venduti all’interno dell’Unione Europea alla ne del loro ciclo di vita. È possibile
portare i prodotti nel più vicino punto di raccolta

viii
Preface ▍
CONTENTS
Copyright Notice�������������������������������������������������������������������������������������������������� ii
Trademarks ���������������������������������������������������������������������������������������������������������� ii
Revision History �������������������������������������������������������������������������������������������������� ii
Technical Support ����������������������������������������������������������������������������������������������� ii
Safety Instructions ��������������������������������������������������������������������������������������������� iii
FCC-B Radio Frequency Interference Statement �������������������������������������������� iv
WEEE (Waste Electrical and Electronic Equipment) Statement ��������� v
Chapter 1 Overview������������������������������������������������������������������������������������������ 1-1
Mainboard Specications........................................................................... 1-2
Mainboard Layout ...................................................................................... 1-4
Chapter 2 Hardware Setup������������������������������������������������������������������������������� 2-1
Quick Components Guide.......................................................................... 2-2
CPU (Central Processing Unit) .................................................................. 2-3
Memory ...................................................................................................... 2-7
Power Supply............................................................................................. 2-9
Back Panel I/O ......................................................................................... 2-10
Connector ................................................................................................ 2-12
Jumper ..................................................................................................... 2-22
Slot........................................................................................................... 2-24
Chapter 3 BIOS Setup �������������������������������������������������������������������������������������� 3-1
Entering Setup ........................................................................................... 3-2
The Menu Bar ............................................................................................ 3-4
Main ........................................................................................................... 3-5
Advanced ................................................................................................... 3-7
Boot.......................................................................................................... 3-12
Security .................................................................................................... 3-13
Chipset..................................................................................................... 3-14
Power....................................................................................................... 3-15
Exit ........................................................................................................... 3-16
Chapter 4 System Resources�������������������������������������������������������������������������� 4-1
AMI POST Code ........................................................................................ 4-2
Resource List ............................................................................................. 4-6
▍

Thank you for choosing the IA-Q45, an excellent in-
dustrial computer board from MSI.
Based on the innovative Intel®Q45 & ICH10DO chip-
sets for optimal system efciency, the IA-Q45 accom-
modates the Intel®Core™2 Quad / Core™2 Duo pro-
cessor and supports 4 DDR3 667/533/400 DIMM slots
to provide the maximum of 16GB memory capacity.
In the entry-level and mid-range market segment,
the IA-Q45 provides a high-performance solution for
today’s front-end and general purpose workstation, as
well as in the future.
Chapter 1
Overview

1-2
Overview ▍
Mainboard SpecificationS
CPU Intel®Core™2 Quad / Core™2 Duo processor■
Chipset North Bridge: Intel®Q45 chipset
South Bridge: Intel®ICH10DO chipset
■
■
Memory 4 unbuffered non-ECC DDR3 667/533/400 DIMM
slots
Supports the maximum of 16GB
■
■
LAN Realtek®RTL8111DL Gigabit Fast Ethernet control-
ler
■
SATA 4 SATA 3Gb/s ports by Intel®ICH10DO■
IDE 1 IDE port by Intel®ICH10DO
Supports Ultra DMA 66/100/133, PIO, Bus Master
operation mode
■
■
Audio HDA Codec by Realtek®ALC888S-VC2-GR
Compliant with Azalia 1.0 specs
6 watt amplier
■
■
■
Graphics Onboard graphics integrated in Intel®Q45■
Back
Panel I/O
& Connec-
tors/Pin-
headers
Back Panel I/O
1 PS/2 mouse port
1 PS/2 keyboard port
2 serial ports
2 VGA ports
2 Gigabit LAN jacks
4 USB ports
1 Line-In audio jack
1 Line-Out audio jack
1 Microphone-In audio jack
■-
-
-
-
-
-
-
-
-

1-3
MS-9876
Onboard Connectors/Pinheaders
1 front audio pinheader
1 front panel pinheader
1 keyboard/mouse pinheader
3 USB 2.0 pinheaders (6 ports)
1 parallel port connector
2 serial port connectors
1 LVDS connector
1 chassis intrusion connector
1 amplier pinheader
■-
-
-
-
-
-
-
-
-
Slot 1 CompactFlash socket
1 Mini PCI-E slot
2 32-bit/33MHz PCI slots
■
■
■
Form Fac-
tor
Micro ATX: 245mm x 245mm■
Environ-
mental
Operating Temperature: 0oC to 60oC
Storage Temperature: -20oC to 80oC
Humidity: 5% ~ 90% RH, Non-Condensing
■
■
■

1-4
Overview ▍
Mainboard Layout
Backlight Connector
SATA Connector
DIMM Slot
LVDS Power Jumper
System Power
Connector
Back Panel I/O
IDE Connector
Front Panel
Connector
Fan Power
Connector
Front USB Connector
Front Audio
Connector
CPU
Chassis Intrusion
Connector
LVDS Connector
PCI Slot
Serial Port Power Jumper
Audio Amplier
Connector
CompactFlash
Socket
Clear CMOS
Jumper
Serial Port
Connector
Keyboard/Mouse
Connector
Parallel Port Connector
Serial Port
Connector
CPU Power
Connector
Fan Power
Connector
Serial Port Power Jumper
Serial Port
Mouse
Port
Keyboard
Port
VGA Port
LAN Jack
USB Port
Line-In Jack
Line-Out Jack
Mic-In Jack

This chapter provides you with the information on
mainboard hardware congurations. Incorrect setting
of jumpers and connectors may damage your main-
board. Please pay special attention not to connect
these headers in wrong direction. DO NOT adjust any
jumper while the mainboard is powered on.
Chapter 2
Hardware Setup

2-2
Hardware Setup ▍
Quick coMponentS Guide
JINV1, p.2-15
JPWR1, p.2-9
SATA1~4,p.2-13
DIMM Slot,p.2-7
JVDD1,p.2-23
JPWR2,p.2-9
Back Panel
I/O, p.2-10
IDE1, p.2-12
JFP1, p.2-15
CPUFAN1,
p.2-14
JUSB1~3, p.2-18
JAUD1, p.2-16
CPU, p.2-3
JCASE1, p.2-13
JLVDS1, p.2-17
PCI1~2, p.2-24
JCOMP1, p.2-23
JAMP1, p.2-16
CF1, p.2-24
JBAT1, p.2-22
COM3_6,
p.2-21
JKB_MS1, p.2-16 JCOMP2, p.2-23
JLPT1, p.2-19
SYSFAN1,
p.2-14
COM7_10,
p.2-20
JGPIO1,
p.2-19

2-3
MS-9876
cpu (centraL proceSSinG unit)
When you are installing the CPU, make sure to install the cooler to prevent
overheating. If you do not have the CPU cooler, consult your dealer before
turning on the computer.
For the latest information about CPU, please visit http://www.msi.com/in-
dex.php?func=cpuform2
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure
the cooling fan can work properly to protect the CPU from overheating.
Make sure that you apply an even layer of thermal paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug
the power supply’s power cord from the grounded outlet rst to ensure the
safety of CPU.
Introduction to LGA 775 CPU
The pin-pad side of LGA 775 CPU. The surface of LGA 775 CPU. Re-
member to apply some thermal
paste on it for better heat disper-
sion.
Alignment Key
Yellow triangle is the Pin 1 indicator
Alignment Key
Yellow triangle is the Pin 1 indicator

2-4
Hardware Setup ▍
CPU & Cooler Installation
When installing the CPU, make sure the CPU has a cooler attached on the top
to prevent overheating. Meanwhile, do not forget to apply some thermal paste
on CPU before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPU & cooler correctly. Wrong installation
will cause damage to your CPU & mainboard.
The CPU socket has a plastic
cap on it to protect the contact
from damage. Before you install
the CPU, always cover it to pro-
tect the socket pin.
1. Remove the cap from lever hinge
side.
2.
The pins of socket reveal.3. Open the load lever.4.
Important
Conrm if your CPU cooler is rmly installed before turning on your system.
Do not touch the CPU socket pins to avoid damage.
The availability of the CPU land side cover depends on your CPU package.
•
•
•

2-5
MS-9876
Lift the load lever up and open
the load plate.
5. After conrming the CPU direc-
tion for correct mating, put down
the CPU in the socket housing
frame. Be sure to grasp on the
edge of the CPU base. Note
that the alignment keys are
matched.
6.
Visually inspect if the CPU is
seated well into the socket. If not,
take out the CPU with pure verti-
cal motion and reinstall.
7. Cover the load plate onto the
package.
8.
Alignment Key

2-6
Hardware Setup ▍
Press down the load lever lightly
onto the load plate, and then
secure the lever with the hook
under retention tab.
9. Align the holes on the mainboard
with the heatsink. Push down
the cooler until its four clips get
wedged into the holes of the
mainboard.
10.
Press the four hooks down to
fasten the cooler. Then rotate
the locking switch (refer to the
correct direction marked on it) to
lock the hooks.
11. Turn over the mainboard to con-
rm that the clip-ends are cor-
rectly inserted.
12.
Mainboard
Hook
Important
Read the CPU status in BIOS.
Whenever CPU is not installed, always protect your CPU socket pin with the
plastic cap covered (shown in Figure 1) to avoid damage.
Mainboard photos shown in this section are for demonstration of the CPU/
cooler installation only. The appearance of your mainboard may vary depend-
ing on the model you purchase.
•
•
•
locking
switch

2-7
MS-9876
MeMory
These DIMM slots are intended for memory modules.
Memory Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data
with two data bus lines simultaneously. Enabling Dual-Channel mode can
enhance the system performance. The following illustrations explain the
population rules for Dual-Channel mode.
1
DIMM1
DIMM2
DIMM3
DIMM4
2
DIMM1
DIMM2
DIMM3
DIMM4
Important
In Dual-Channel mode, make sure that you install memory modules of the
same type and density in different channel DIMM slots.
DDR3
240-pin, 1�5V
72x2=144 pin48x2=96 pin

2-8
Hardware Setup ▍
Installing Memory Modules
The memory module has only one notch on the center and will only t
in the right orientation.
Insert the memory module vertically into the DIMM slot. Then push it in
until the golden nger on the memory module is deeply inserted in the
DIMM slot. The plastic clip at each side of the DIMM slot will automati-
cally close when the memory module is properly seated.
Manually check if the memory module has been locked in place by the
DIMM slot clips at the sides.
Important
You can barely see the golden nger if the memory module is properly in-
serted in the DIMM slot.
1.
2.
3.
Notch
Volt