MULTISPAN UTR - 1044 User manual

OPERATING MANUAL
UNIVERSAL TIMER
UTR - 1044/2044/444
OPERATING MANUAL
UNIVERSAL TIMER
UTR - 1044/2044/444
Technical Specification
Notes:
1). For safely purpose, key function are designed in such a way that operator will not go into
detailed parmeter setting (Previously Set) function. In this situation, in LOCK parameter,
has to be selected. If previously set parameters are to be changed, then any operator
has to select
2). In Cycling Mode, parameter will be displayed.
3). POWER ON () : Timer starts counting as soon as it gets power supply.
4). By default ON delay Mode is provided. Please refer programming guide to change to OFF
delay or Cycling Mode.
1). Turn ON instrument. SET time according to your requirment.
2). In running mode, upper display indicates current TIME value and lower display shows SET
time value. Relay ON or OFF controls depends on set time.
3). Relay operation is according to selection of Delay ON or Delay OFF in programming menu.
4). In cycling mode, relay will turn on for ON time (time-1) & relay will turn off for OFF time
(time-2) and this ON-OFF process will continue.
5). To reset the time, press Reset Key.
YES
NO
UNT- UNT TIME MEMO1, -2 &
Working
Page - 1 www.multispanindia.com
1) Display : a) Upper : 4 digit, 0.56’’, 7 segment LED
b) Lower : 4 digit, 0.4’’, 7 segment LED
2) Output : 1 relay, 2 C/O, 230V AC, 5 Amp.
3) Supply : 110V to 250V AC, 50 Hz smps
96 X 96 X 50 mm 72 X 72 X 60 mm 48 X 48 X 90 mm
UTR - 1044 UTR - 444
R1
R2
Universal Timer UTR-1044
TIME
SET TIME
1 2 3 4
1 2 3 4
UTR - 2044
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4

Page - 2
www.multispanindia.com
PARAMETER MODE
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press SET/ENT key
press SET/ENT key
press SET/ENT key
Lock Mode : yes / no
L O C KL O C K
Y E S N O
F U N C
D L O F D L O N C Y O F C Y O N
N O C L
SELECT BY
key
SELECT BY
SELECT BY
key
key
SELECT BY
key
SELECT BY
key
SELECT BY
key
SELECT BY
key
SELECT BY
key
Select:
Cycling Mode
delayed ON or
delayed OFF or
9 999 SEC.9 999 SEC.9 999 SEC.9 999 SEC.
9 999 SEC.9 999 SEC.
99 9 min SEC..599 9 min SEC..599 9 min SEC..599 9 min SEC..5
99 9 min SEC..599 9 min SEC..5
99 9 hr min..599 9 hr min..599 9 hr min..599 9 hr min..5
99 9 hr min..599 9 hr min..5
999 9 min.999 9 min.999 9 min.999 9 min.
999 9 min.999 9 min.
999 9 hr.999 9 hr.999 9 hr.999 9 hr.
999 9 hr.999 9 hr.
9999 hr 9999 hr
9999 hr
999 9 SEC.999 9 SEC.999 9 SEC.999 9 SEC.
999 9 SEC.999 9 SEC.
9999 SEC 9999 SEC
9999 SEC
9999 MIN 9999 MIN
9999 min
select by key select by key
select by key
U N T 1U N T 1
p u L s
U N T 2
M I NM I N
T r G
M I N
M I NM I N
M I N M I N
M I N
M I N
R R
E n B L
R R
R
R
S E CS E C
P O O N
S E C S E C
S E C
S E C
Time-1 select:
Time-2 select: Sec, Min, Hr
Sec, Min, Hour
T I M E
U P D n
Memory Retain (yes / no)
Memory Retain (yes / no)
T I M E
M E M O
M E M O
U P
Y E S
Y E S
D n
N O
N O
1 2 3 4
1 2 3 4
Process Value
Set Value
T I M 1
1 2 3 4
Delay time (time-1)
T I M 1
1 2 3 4
Cycle ON time (time-1)
Cycle OFF time (time-2)
SELECTED BY
KEY
SELECTED BY
SELECTED BY
KEY
KEY
SELECTED BY
KEY
SELECTED BY
SELECTED BY
SELECTED BY
KEY
KEY
KEY
SELECTED BY
KEY
SELECTED BY
KEY
press key to
set cycle ON time
press key to
set cycle OFF time
press key to
set cycle Delay time
T I M 2
1 2 3 4
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
If Delayed ON/ Delayed OFF is selected
If Delayed ON/ Delayed OFF is selected
If Cycling Mode is selected
If Cycling Mode is selected
press
SET/ENT
key
press
SET/ENT
key
Time Count : UP/Down
Time Count : UP/Down
OFF Starting ON Starting
No. of Repeat
Cycle

CONNECTION TERMINAL DIAGRAM
Page - 3 www.multispanindia.com
DESCRIPTION
Time - 1
Delayed OFF
No. of cycle to repeat
All Parameter allowed to set
Lock Parameter
Unit - 2 for Time - 2
Cycling time
Start from relay on
Minute set for Time - 1 or 2
Up counting
Memory Retain : Yes / No
Enable/ Trigger/ Power ON
DISPLAY
SR.
1
9
5
13
3
11
7
15
18
Time - 2
Unit - 1 for Time - 1
Delayed function
Seconds set for Time - 1 or 2
Direction of time counting
All Parameter Locked
Delayed ON
Start from relay off
Hour set for Time - 1 or 2
Down counting
2
10
6
14
17
4
12
8
16
19
20
21
22
T I M 1
T I M 2
Y E S
N O
F U N C
C Y L E
C Y O N
D L O N
C Y O F
D L O F
N O C L
U N T 1
U N T 2
S E C
M I n
R
T I M E
U P
m E M O
P U L S
D N
L O C K
DISPLAY MESSAGE AND THEIR MEANING
1
+VE
L
SUPPLY
110 To 250V AC
N
No1 No2
Nc1 Nc2
C1 C2
I/P1 I/P2 GND RESET
2345678 9 10
17 16 15 14 13 12 11
181920
NPN PROXI:- Short Pins 16 & 15NPN PROXI:- Short Pins 16 & 15
Proxi Connection to 15,14 & 13Proxi Connection to 15,14 & 13
M/S Connection to 16 & 15M/S Connection to 16 & 15
MICRO SWITCH :- Short Pins 14 & 13MICRO SWITCH :- Short Pins 14 & 13
PNP PROXI:- Short Pins 13 & 14PNP PROXI:- Short Pins 13 & 14
Proxi Connection to 16,15 & 14Proxi Connection to 16,15 & 14
M/S
110 TO 250V AC RESET
SUPPLY
18
29
310
411
512
613
714
N
L
RELAY
RELAY
NO NO C
CNC NC
GND
I/P2
I/P1
+Ve
NPN PROXI:- Short Pins 3 & 4
Proxi Connection to 4,5 & 6
M/S Connection to 3 & 4
MICRO SWITCH :- Short Pins 5 & 6
PNP PROXI:- Short Pins 5 & 6
Proxi Connection to 3,4 & 5
NC L
N
R
PROXY
RELAY
SUPPLY
110 TO 270V AC110 TO 270V AC
G
B
M/S
NC
NO
NO
C
RESET

Product improvement and upgrade is a constant procedure. So for more updated operating information and support, please
contact our Helpline : 079-22770865 or Email at marke[email protected]
NOTE :
Page - 4 www.multispanindia.com