SAFETY WARNINGS:
For your device and your safety, some safety rules must be followed.
•Read the user manual carefully.
•Read the safety warnings carefully.
Matters to be considered during handling, transportation and storage;
•During transportation and transportation, always carry the product with its box. The box of the
product will protect the product from physical damage.
•Do not place heavy objects on the device or its box. The device may be damaged.
•If the device is dropped, the device may not work or permanent damage may occur.
•Too cold or hot may cause deformation in the product. May shorten the life of electronic circuits or
cause them to fail.
Situations that may be dangerous or harmful to human or environmental health during use;
•Pay attention to the sharp edges when taking the product out of the box. Dispose of the product
packaging in waste bins separated by type.
Device Maintenance;
•Your device does not require periodic maintenance and only apply to authorized services for
maintenance and repair.
•You can clean the product periodically by wiping it with a dry cloth. Unplug the device before cleaning.
Cleaning agents such as alcohol, gasoline, thinner, etc. make sure it does not contain any solvents.
Wipe the device with a dry cloth.
•Do not use cables other than the original cable in order to prevent a possible electric shock.
•Do not insert foreign objects into your device or try to open it with tools that may cause electric shock.
•Connection and installation of your device by anyone other than the authorized service may cause
damage to the device.
Considerations regarding the energy consumption of the device;
•The device is designed to operate continuously 24/7. However, in case the device will not be used for
a long time, it is recommended to remove the device from the socket connection at the back so that
the device does not consume unnecessary energy. In addition, it should not be forgotten that every
terminal that is left open consumes unnecessary energy and care should be taken to keep the
terminals closed.
Please contact our authorized services in case of malfunction. (See page 10)