Musicom Lab EFX-LE II User manual

EFX-LEII
Audio Controller
EFX-LEII EDITOR
OWNER’S MANUAL

EFX-LE II EDITOR OWNER’S MANUAL 2
Download and Unpack the EFX-LEII Editor
▪ Download and unpack the Zip file.
www.musicomlab.com/efx-le2.htm
Note
ꞏ The EFX-LEII Editor is a standalone software. No installation is required.
ꞏ To use the EFX-LEII Editor, the EFX-LEII firmware must be V2.00 or higher.
If the EFX-LEII firmware is lower than V2.00, you need to update to the latest firmware.
MIDI Interface
▪ Connect your computer and MIDI interface.
▪ Connect the MIDI interface’s MIDI IN to the EFX-LEII’s MIDI OUT/THRU and the MIDI interface’s MIDI OUT to the EFX-LEII’s
MIDI IN.
Note
ꞏ Make sure to install the latest drivers for your MIDI interface before attempting to start the EFX-LEII Editor.
ꞏ Our recommended MIDI interface is the Roland UM-ONE.
This MIDI interface is inexpensive and has been tested to be compatible with the EFX-LEII.
Screen Description
1. MAIN MENU – Select a main menu. These buttons are activated only when there is data within the editor.
2. SEARCH – Scan the MIDI interface that is connected to your PC or MAC.
3. CONNECT – Connect to the EFX-LEII.
4. MIDI IN/OUT DEVICE – Select the your MIDI interface’s MIDI IN & OUT
5. MIDI SPEED – Control the speed of the MIDI signal that send and receive data with the EFX-LEII.
6. NEW – Start a new edit with default setting without connecting to the EFX-LEII.
7. OPEN – Open an existing file.
8. LOAD – Load all data from the EFX-LEII. This button is activated after connecting to the EFX-LEII.
9. SAVE – Save the current edit to a file.
10. DUMP – Dump the data in the selected area to the EFX-LEII.
11. DUMP AREA – Select the data area to dump to the EFX-LEII.
12. DETAILS – Show the firmware update process.
13. FIRMWARE – Open a firmware file.
14. UPDATE – Start the firmware update.

EFX-LE II EDITOR OWNER’S MANUAL 3
15. PRESETS – Select the preset that you want to edit.
16. SIGNAL ROUTING – Show the guitar signal flow. Selecting a loop or signal line activates the buttons below.
17. ROUTING BUTTON – Change the selected loop or signal line.
18. MIDI SELECTOR – Select to change 12 MIDI messages or XPDL assigned to the preset..
19. TITLE / BPM / VOLUME – Change the title, BPM and two volumes in the selected preset.
20. IA COMBINATION – Turn on/off the IA switches that are stored in the selected preset.
21. SONGS – Select the song that you want to edit.
22. PRESETS IN SONG – Select the preset in the song that you want to edit.
23. AVAILABLE PRESETS – Select the original preset to be used in the song by double-click.
24. BPM / SONG TITLE – Change/Type the BPM and song title you want to change.
25. SETLISTS – Select the set that you want to edit.
26. SONGS IN SET – Select the song in the set that you want to edit.
27. AVAILABLE SONGS – Select the original song to be used in the set by double-click.
28. SET TITLE – Type the set title you want to change.

EFX-LE II EDITOR OWNER’S MANUAL 4
29. PAGE UP / DOWN – Increase or decrease the page
30. PAGE TITLE – Show the page title and type the page title you want to change.
31. SWITCH TITLE – Show the switch title and type the switch title you want to change.
32. SWITCH SELECT – Click the switch that you want to change the function.
33. MAIN – Change the main function of the selected switch.
34. AUDIO – Change the audio function of the selected switch.
35. MIDI – Change the MIDI function of the selected switch.
36. MIDI – Change the general MIDI functions of the EFX-LEII.
37. AUDIO – Change the general audio functions of the EFX-LEII.
38. OTHERS – Show the additional functions of the EFX-LEII.
39. COPY – Copy a preset, song or set.