MV LINE EVO ZIP User manual

Insert the inner guide and ensure that the zip enter the plastic scroll profile. Place the latch-guide profile and fix it
with the proper screws in the arran-
ged holes.
Insert the side guides in the winglets
of the caps.
1Place the structure in the window
frame.
2Fix the side guides using the proper
holes.
Verify the proper functioning.
3
6
54
EVO ZIP
INSTALLING INSTRUCTIONS
The installation of the flyscreen should be made by two persons at least and qualified personnel following the
instructions listed below. Use screws or anchors suitable for the type of wall on which the flyscreen will be instal-
led. Make sure that the jambs are parallel and at right-angle; in case of out of square walls make the necessary
adjustments to ensure parallelism to the profiles of the flyscreen.
Please note: pictures
shown are simulating
inner room view.

This document is an integral part of the product and is intended
for the benefit of all persons using the screen (users + installation
and maintenance operators).
All the instructions listed in this document comply with the EU Ma-
chinery Directive and provides for the correct use, installation and
maintenance of the screen, with the aim of avoiding damage to
persons and to the product.
MV LINE would like to congratulate you on your purchase of this
insect screen.
This guide will help you appreciate the advantages of this scre-
en and assist you during the use, installation and maintenance
phases. The company reserves the right to implement partial or
complete modifications without prior notice and declines any re-
sponsibility in relation to any possible inaccurate or incomplete
information.
This guide is the property of MV LINE.
Reproduction (even partial) of this document is expressly prohi-
bited without prior authorisation from MV LINE.
INTENDED USE
The insect screen is intended, as its name would suggest, to act
as a protective screen against intrusive insects in the room or
area where it has been located. Any other use shall be considered
improper. The manufacturer will not be held responsible for dama-
ge arising from improper, erroneous and irrational use.
PACKAGING, MOVEMENT AND TRANSPORT
• The screens are packaged in transparent bags, cardboard
and polyethylene wrapping which protect the unit during
transport.
• The screen can be moved by hand and does not require any
special equipment to facilitate movement.
• Please take every precaution to avoid any possible damage
to the screen.
• After removing the packaging, check that the screen is in per-
fect condition and that there are no visibly damaged parts.
If in doubt, do not use the screen and contact the supplier.
ATTENTION!!!
Packaging materials must not be left within the reach of children.
USE
Avoid use (opening and closing of the screen) by children.
MAINTENANCE
• Regularly clean the magnetic parts using a damp cloth.
• In the case of wear and tear, lubricate the bearings using a
silicone spray.
• All extraordinary maintenance operations must be carried
out by suitably qualified personnel.
• Spare-parts are available from retailers or directly from MV
LINE.
DISASSEMBLY AND DECOMMISSIONING
Before disassembling the screen, please consult the instructions
manual. The screen does not contain dangerous materials. There
are no specific guidelines for decommissioning or disposal.
GUARANTEE
Do not disassemble apparently malfunctioning parts or accesso-
ries on your own initiative, please contact the retailer who shall
organise technical support and spare-parts, failure to do so will af-
fect the conditions of the guarantee. The guarantee includes the
complete or partial replacement of the unit or parts in the case
of functional issues arising from manufacturing defects and is
exempt from damage and deterioration caused by the customer.
In order to use the guarantee you must copy the INSECT SCREEN
CODE as displayed on the label attached to the screen housing
into the white space below (see fac-simile fig. 1) and attach the
relevant proof of purchase (receipt or invoice).
This screen is guaranteed by MV LINE for a period of 24 months.
Code:
PRODUCT INFORMATION
USE • MAINTENANCE • GUARANTEE
DECLARATION OF CONFORMITY
The undersigned
MV LINE s.p.a.
Via Umbria - Lotto 69 70021 Acquaviva delle Fonti (BA),
Italy
Hereby declares that the product:
Wind resistence: Class 6 UNI EN 1932
complies to the following EU directives (including all appli-
cable modifications):
Machinery Directive 89/392/CEE and Norm UNI EN 13561
Appendix ZA.1
Year of CE marking: 2016.
Acquaviva delle Fonti, 03.01.2016
Signature
Paolo Montanaro
(CEO)
MV LINE s.p.a.
Via Umbria - Lotto 69 70021
Acquaviva delle Fonti (BA)
Prodotto: CURTAIN
Classe: 6
EN 13561
16
EVO ZIP
Find and copy the code
displayed on the label atta-
ched to the screen housing
as shown here.