mxr Sugar Drive User manual

Sugar
™ Drive
Based on a rare and mythical overdrive pedal,
the Sugar Drive provides a diverse range of clear
and transparent tones, from sauced up boosting
to rich overdrive.
M294
92503021625REVA
jimdunlop.com/m294

M294 | Sugar Drive 2
1VOLUME knob sets overall effect volume
2TONE knob rolls off high frequencies
3DRIVE knob sets the amount of overdrive
4BUFFER switch selects buffered bypass
(indicated by blue LED)
5FOOTSWITCH toggles effect on/bypass
(blue LED indicates on)
6By default, the M294 is set to true bypass switching
For buffered bypass switching, set the BUFFER
switch to its RIGHT position.
1
4
2
3
5
6
External Controls

M294 | Sugar Drive 3
Basic Operation
1Start with all controls at 12 o’clock.
2Turn the effect on by depressing the FOOTSWITCH.
3Rotate the VOLUME knob clockwise to increase the overall
effect volume or counterclockwise to decrease it.
4Rotate the TONE knob clockwise for a brighter sound or
counterclockwise for a warmer sound.
5Rotate the DRIVE knob clockwise to increase amount of
overdrive or counterclockwise to decrease it.
The MXR Sugar Drive is powered by the included
Dunlop ECB003 9-volt adapter or the DC Brick™
and Iso-Brick™ power supplies.
Power
Operation

M294 | Sugar Drive 4
Specifications
Input Impedance 600 kΩ
Output Impedance 3 kΩ
Nominal Input Level +6 dBV
Maximum Output Level
True Bypass without Buffer selected
+26 dBV
Tone control (@ full CCW): -20 dB @ 3 kHz
Current Draw 18.5 mA @ 9 VDC
Power Requirements 9 VDC (ECB003 AC adapter)
Throughput Gain up to +50 dB @ 1kHz
All measurements made at 1 kHz, speed at mid position.