NANLITE Forza 60 User manual

Guangdong NanGuang Photo&Video Systems Co., Ltd
USER MANUAL
Forza 60 LED SPOT LIGHT

Forza 60 LED Spot Light
Product Show
LED Power: 60W
Voltage: DC 15V
Color Temperature: 5600K
CRI(Ra): 98
Technical Data
1

Guangdong NanGuang Photo&Video Systems Co., Ltd
USER MANUAL
Forza 60 LED SPOT LIGHT
3. Bracket fixing knob 11. Reflector
What's in the box? Please kindlly check.
Components
Power Adapter x 1 Power Cable x 1 Reflector x 1 User Manual x 1 Carrying Bag x 1
1. Angle fixing knob
2. L shaped
bracket
4. Lock catch
5. LCD display
6. Dimmer knob
7. Function
knob
8. Power socket
9. Power switch
10. LED indicator
Forza 60 x 1
2

1. Angle fixing knob: For adjusting and fixing the vertical illumination direction of fixture.
2. L shaped bracket: For connecting the spot light on light stand and adjusting the illumination angle of fixture.
3. Bracket fixing knob: For connecting the spot light and camera equipment,
and adjusting the horizontal illumination direction of fixture.
4. Lock catch: For installing and disassembling reflector and other accessories.
5. LCD display: For displaying functions and operating datas.
6. Dimmer knob: For adjusting brightness, user could adjust brightness as their requirest for different shooting
environment.
7. Function knob: For providing the application of light mode / adress code / fan mode.
8. Power socket: For DC power input.
9. Power switch: For on / off the fixture.
10. LED indicator: For determining the status of power input. Being on, power supply is normal. Flashing or being off,
power supply is abnormal or no power input.
11. Reflector: For gathering light to improve central illumination.
Detailed description
Usage
1. Installation of Bracket
Fixing the LED spot light
on light stand and rotating
the bracket fixing knob to
adjust the angle of this light for
different shooting needs.
Locking the angle fixing knob
clockwise and loosening
it anticlockwise.
3

DIM: 100%
*
FX: OFF
CH: 3
2. Installation Instruction of Reflector
When installing the reflector, make sure its
mount points line up with the slots on the
light fixture. When the mount points and
slot are lined up push the reflector in place
rotate reflector in the locking direction as
describe on light until you hear it click into place.
When removing the reflector, push
and hold on lock catch until rotating
the reflector and you are able to
remove it from fixture.
The reflector lock on/off mark.
Operating Instructions
1. Wiring (sketch maps as below)
Be sure that the power switch is
in the "off " position.
Connect the power adapter with
the fixture. If the power indicator is
on that means the power supply is
nominal.
The LCD screen will display
all the relevant information for
the fixture.
Lock catch
4