NANLITE FS-150B User manual

Guangdong NanGuang Photo&Video Systems Co., Ltd.
FS-150B
FS-200B
FS-300B
USER MANUAL

1
Product Diagram
FS-150B/FS-200B/FS-300B
LED Spot Light
Model No.: FS-150B
Rated power: 175W
Input: AC100-240V
50/60HZ
Color Temperature: 2700K-6500K
CRI: Average 96
TLCI: Average 97
Model No.: FS-200B
Rated power: 220W
Input: AC100-240V
50/60HZ
Color Temperature: 2700K-6500K
CRI: Average 96
TLCI: Average 97
Model No.: FS-300B
Rated power: 350W
Input: AC100-240V
50/60HZ
Color Temperature: 2700K-6500K
CRI: Average 96
TLCI: Average 97
Technical Data

2
Product Details
7. USB port
6. Lamp body handle
5. LCD screen
1. Lock catch
3. Reflector
2. Umbrella hole
4. Angle fixing knob
8. Right knob
9. MODE button
12. Left knob
10. Power switch
11. Fuse base
13. Power socket
15. Bracket fixing knob
14. Yoke

3
Detailed Description
1. Lock catch: For installing and disassembling reflector and other accessories.
2. Umbrella hole: For installing/removing an umbrella.
3. Reflector: For gathering light to improve the central illumination.
4. Angle fixing knob: Allows for adjusting and fixing the illumination direction.
5. LCD screen: For displaying the data.
6. Lamp body handle: Be convenient for users to lift the lamps and adjust the direction of the light.
7. USB port: For updating the firmware.
8. Right knob: For selecting options and adjusting the color temperature under CCT mode.
9. MODE button: For switching between CCT mode, EFFECT mode and MENU.
10. Power switch: For switching on/off the fixture.
11. Fuse base: For placing the fuse.
12. Left knob: For adjusting the DIM and scrolling through different selections.
13. Power socket: AC power input socket.
14. Yoke: Designed for connecting the lamp to the light stand and adjusting the direction of light.
15. Bracket fixing knob: For locking the light fixture and stand, and adjusting the horizontal direction of light.

4
Usage
1. Installation of the Reflector
When installing the reflector,
ensure its mounting points align
with the slots on the light fixture.
When the mounting points and
slots are aligned, push the
reflector in place and rotate it in
the direction shown on the light
until it clicks into place.
When removing the reflector,
push and hold the lock catch
and rotate until the reflector is
free to be removed from the
fixture.
Press lock catch to release the
reflector.
2. Installation of an Umbrella
Loosen the angle fixing knob. Put the umbrella into the
umbrella hole.
Tighten the angle fixing knob to
lock the umbrella in place.

5
MENU
BT: RESET
WIRELESS PR
: V1.0
MENU
BT: RESET
WIRELESS PR
: V2.0
MENU
BT: RESET
WIRELESS PR
: V1.0
3. 2.4G and Bluetooth Remote Control
FS-150B/200B/300B are able to be remotely controlled by 2.4G remote controller, or by NANLINK APP through the
WS-TB-1 transmitter box or via Bluetooth module directly.
Note: ①2.4G remote controller and transmitter box are sold separately.
②The fixtures support the 2.4G wireless protocol V1.0 and V2.0. The fixture should be set in V2.0 while using
WS-RC-C1 or WS-RC-C2 remote controller, set in V1.0 while using other remote controllers.
MODE
Rotate the "right knob" to WIRELESS PROTOCOL.
Press MODE button to enter the menu.
Rotate the "left knob" to select V1.0 or V2.0.
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512

6
2. CCT Mode Setting
Press MODE button to CCT mode, rotate the "left knob" to set the DIM (DIM range: 000%…100%),
rotate the "right knob" to set the color temperature (CCT range: 2700K…6500K).
Press MODE button to CCT mode.
Operating Instructions
1. First ensure that the power switch of the fixture is off. Now turn on the light, the LCD screen will display all the
relevant information for the fixture.
CCT CH: 512
000% 5600K
MODE
CCT CH: 512
000% 5600K
CCT CH: 512
000% 5600K
CCT CH: 512
100% 5600K
Rotate the "left knob" to set the DIM.
0%
.
.
.
100%

7
Press the MODE button to EFFECT mode.
Rotate the "right knob" to FX.
3. EFFECT Mode setting
Press the MODE button to EFFECT mode. The FS-150B/200B/300B have built-in effects including CCT LOOP,
INT LOOP, FLASH, PULSE, STORM, TV, PAPARAZZI, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION
and WELDING.
Note: 1. In effect mode, DIM range is the same as the CCT MODE.
2. In effect mode, the color temperature is not synchronized with the color temperature in CCT mode, and the
CCT adjustment range is the same as that in the CCT mode.
3. When the fixture function is unlocked, in any modes, press the "left knob" to turn off the light, the brightness
percentage on the screen is 000% in this case. Press again to restore the light to its previous state, and
press continuously to switch between on and off.
MODE
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
Rotate the "right knob" to set the color temperature.
CCT CH: 512
000% 2700K
CCT CH: 512
100% 6500K
2700K
.
.
.
6500K
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP

8
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
Rotate the "left knob" to select the desired effect.
①CCT LOOP
CCT LOOP setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 02S…30S),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
CCT LOOP
.
.
.
WELDING
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 099%
FX: CCT LOOP

9
③FLASH
FLASH setting: rotate the "right knob" to select from DIM, CCT and INTERVALS (Range: 0.1S…10S),
then rotate the "left knob" to adjust the value of DIM, CCT and INTERVALS.
Rotate the "right knob" to select from DIM, CCT and INTERVALS.
②INT LOOP
INT LOOP setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 02S…30S),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
EFFECT CH: 512
FX: INP LOOP
DIM: 000% - 100%
EFFECT CH: 512
FX: INP LOOP
DIM: 099% - 100%
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512
DIM: 000% - 100%
FX: INP LOOP
EFFECT CH: 512
FX: INP LOOP
DIM: 000% - 100%
EFFECT CH: 512
DIM: 100%
FX: FLASH
EFFECT CH: 512
DIM: 100%
FX: FLASH

10
Rotate the "left knob" to adjust the value of DIM, CCT and INTERVALS.
④PULSE
PULSE setting: rotate the "right knob" to select from DIM, CCT and PULSES/MIN (Range: 001…240),
then rotate the "left knob" to adjust the value of DIM, CCT and PULSES/MIN.
Rotate the "right knob" to select from DIM, CCT and PULSES/MIN.
Rotate the "left knob" to adjust the value of DIM, CCT and PULSES/MIN.
EFFECT CH: 512
DIM: 100%
FX: FLASH
EFFECT CH: 512
DIM: 099%
FX: FLASH
EFFECT CH: 512
DIM: 100%
FX: PULSE
EFFECT CH: 512
DIM: 100%
FX: PULSE
EFFECT CH: 512
DIM: 100%
FX: PULSE
EFFECT CH: 512
DIM: 099%
FX: PULSE

11
⑤STORM
STORM setting: rotate the "right knob" to select from DIM, CCT and INTVL (Range: 1s ... 60s) ,
then rotate the "left knob" to adjust the value of DIM, CCT and INTVL.
Rotate the "right knob" to select from DIM, CCT and INTVL.
⑥TV
TV setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 001…100),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
Rotate the "left knob" to adjust the value of DIM, CCT and INTVL.
EFFECT CH: 512
DIM: 100%
FX: STORM
EFFECT CH: 512
DIM: 100%
FX: STORM
EFFECT CH: 512
DIM: 100%
FX: STORM
EFFECT CH: 512
DIM: 099%
FX: STORM
EFFECT CH: 512
DIM: 000% - 100%
FX: TV
EFFECT CH: 512
FX: TV
DIM: 000% - 100%

12
EFFECT CH: 512
FX: TV
DIM: 000% - 100%
EFFECT CH: 512
FX: TV
DIM: 099% - 100%
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
⑦PAPARAZZI
PAPARAZZI setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 001…100),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512
DIM: 100%
FX: PAPARAZZI
EFFECT CH: 512
DIM: 100%
FX: PAPARAZZI
EFFECT CH: 512
DIM: 100%
FX: PAPARAZZI
EFFECT CH: 512
DIM: 099%
FX: PAPARAZZI

13
EFFECT CH: 512
FX: CANDLE/FIRE
DIM: 000% - 100%
EFFECT CH: 512
FX: CANDLE/FIRE
DIM: 099% - 100%
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
⑧CANDLE/FIRE
CANDLE/FIRE setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 001…100),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
⑨BAD BULB
BAD BULB setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 001…100),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
EFFECT CH: 512
DIM: 000% - 100%
FX: CANDLE/FIRE
EFFECT CH: 512
FX: CANDLE/FIRE
DIM: 000% - 100%
EFFECT CH: 512
DIM: 100%
FX: BAD BULB
EFFECT CH: 512
DIM: 100%
FX: BAD BULB

14
⑩FIREWORK
RIREWORK setting: rotate the "right knob" to select from DIM, CCT, SPD (Range: 001…100) and DECAY
(Range: 001…100), then rotate the "left knob" to adjust the value of DIM ,CCT, SPD and DECAY.
Rotate the "right knob" to select from DIM, CCT, SPD and DECAY.
Rotate the "left knob" to adjust the value of DIM, CCT, SPD and DECAY.
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512
DIM: 100%
FX: BAD BULB
EFFECT CH: 512
DIM: 099%
FX: BAD BULB
EFFECT CH: 512
DIM: 100%
FX: FIREWORK
EFFECT CH: 512
DIM: 100%
FX: FIREWORK
EFFECT CH: 512
DIM: 100%
FX: FIREWORK
EFFECT CH: 512
DIM: 099%
FX: FIREWORK

15
⑫WELDING
WELDING setting: rotate the "right knob" to select from DIM, CCT, SPD (Range: 001…100) and
PAUSE (ON/OFF), then rotate the "left knob" to adjust the value of DIM, CCT, SPD and PAUSE.
Rotate the "right knob" to select from DIM, CCT, SPD and PAUSE.
⑪EXPLOSION
EXPLOSION setting: rotate the "right knob" to select from DIM, CCT, SPD (Range: 001…100) and DECAY
(Range: 001…100), then rotate the "left knob" to adjust the value of DIM ,CCT, SPD and DECAY.
Rotate the "right knob" to select from DIM, CCT, SPD and DECAY.
Rotate the "left knob" to adjust the value of DIM ,CCT, SPD and DECAY.
EFFECT CH: 512
DIM: 100%
FX: EXPLOSION
EFFECT CH: 512
DIM: 100%
FX: EXPLOSION
EFFECT CH: 512
DIM: 100%
FX: EXPLOSION
EFFECT CH: 512
DIM: 099%
FX: EXPLOSION
EFFECT CH: 512
DIM: 000% - 100%
FX: WELDING
EFFECT CH: 512
FX: WELDING
DIM: 000% - 100%

16
EFFECT CH: 512
FX: WELDING
DIM: 000% - 100%
EFFECT CH: 512
FX: WELDING
DIM: 099% - 100%
Rotate the "left knob" to adjust the value of DIM, CCT, SPD and PAUSE.
·Special effects may be upgraded based on the firmware update. Please refer to the latest firmware function
description for reference.
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
4.MENU setting
MODE
Press the "right knob" to select from CH, OUTPUT MODE, BLUETOOTH, WIRELESS PROTOCOL, FAN,
FIRMWARE UPDATE, LANGUAGE and VERSION.
Press MODE button to MENU.
①CH
MODE
Press the "right knob" to MENU.

17
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
CH: 512
OUTPUT MODE: MAX
MENU
CH: 512
OUTPUT MODE: MAX
MENU
CH: 512
OUTPUT MODE: CONST
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 511
Rotate the "left knob" to set the channel.
②OUTPUT MODE
MODE
Rotate the "right knob" to OUTPUT MODE.
Press MODE button to MENU.
Rotate the "left knob" to select MAX or CONSTANT.

18
BT RESET
BACK RESET
BT RESET
BACK RESET
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
③BLUETOOTH RESET
MODE
Press MODE button to switch to the MENU.
Rotate the "right knob" to BT.
Press the "right knob" to the interface of bluetooth reset.
Rotate the "right knob" to select RESET.
MENU
WIRELESS PR
:
V1.0
BT: RESET
MENU
WIRELESS PR
:
V1.0
BT: RESET
BT RESET
BACK RESET

19
BT RESET
BACK RESET
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
MENU
OUTPUT MODE: MAX
CH: 512
⑤FAN
MODE
Rotate the "right knob" to FAN.
Press MODE button to MENU.
④WIRELESS PROTOCOL
Please refer to P5 for the details of wireless protocol setting.
Press the "right knob" to confirm the reset, and it will return to menu after bluetooth reset.
MENU
FW UPDATE
:
UPDATE
FAN: OFF
This manual suits for next models
2
Table of contents
Other NANLITE Spotlight manuals

NANLITE
NANLITE FS-300B User manual

NANLITE
NANLITE Forza 300B User manual

NANLITE
NANLITE FS-150 User manual

NANLITE
NANLITE FS-60B User manual

NANLITE
NANLITE Forza 720 User manual

NANLITE
NANLITE Forza 60B User manual

NANLITE
NANLITE P-100 User manual

NANLITE
NANLITE Forza 60 User manual

NANLITE
NANLITE Forza 720 User manual

NANLITE
NANLITE FS-60B User manual
Popular Spotlight manuals by other brands

venalsol
venalsol AGRO-M instructions

Brinkmann
Brinkmann Qbeam MAX MILLION 2 owner's manual

Eternal Lighting
Eternal Lighting WPL240BS installation instructions

Heitronic
Heitronic 23157 Installation and operating instructions

Infinity
Infinity iFX-640 user manual

Philips
Philips SmartSpot 57971/48/16 user manual